ReviewsGgg Jacket

Wera 05017205001 Offset Screwdriver 919 PH 1 + 2x125mm

  • Ideal for use where screws are concealed or obstructed, leverage is required, or turning space is limited.
  • This rachet screwdriver includes 1/4 in. straight and #2 crosspoint blades. Its overall length is 4 inches.
  • Made of steel the ratcheting screwdriver instantly adjusts for right or left-hand use. Its dimensions meet U.S. government specification GGG-S-1408.
  • The handle's rotation can be instantly toggled between clockwise and counterclockwise.
Check Stock

Mayhew Select 10402 1/2-by- 6-Inch Cold Chisel

  • Used to cut flat grooves for keyways or slots.
  • Meets or exceeds ASME b107_401 and US govt ggg-c-313d.
  • Made of alloy steel and heat treated for long life.
  • Ideal for cutting, scraping or removing metal softer than the cutting edge of the chisel.
  • Rust preventative coating applied to steel for additional protection.
Check Stock

Mayhew Select 10602 3/4-by-7-Inch Cold Chisel , Black

  • Used to make a v-shaped groove in metal, provides a sharp pointed bottom to the grooves.
  • Available in varying cuts and lengths, for varying sizes of grooves.
  • meets or exceeds ASME B107_401 and US govt GGG-C-313D.
  • Made of alloy steel and heat treated for long life.
  • Ideal for cutting, scraping or removing metal softer than the cutting edge of the chisel.
  • Rust preventative coating applied to steel for additional protection.
Check Stock

General Tools MG-S281-4R Combination Set with Square and Center Head, Reversible Protractor Head and Patented Locating Device

  • Patented locating screw automatically positions all heads for quick assembly.
  • With hardened square and center heads for durability.
  • Double shoulder reversible protractor head.
  • Square head has spirit level and hardened scriber.
  • Meets Government specification, GGG-S-656C.
Check Stock

HHIP 4401-1812 Black Granite Surface Plate Grade A Ledge 0 18 Length x 12 Width x 3 Height +/000050 Accuracy 80 lb Weight

  • Surface plates are checked by an auto-collimator for overall accuracy assurance..
  • This granite surface plates meet or exceed Federal Specifications GGG-P-463C..
  • Accuracy is +/-.000050" Grade A (Grade 0)..
Check Stock

Mitutoyo 530-122 Vernier Caliper, Stainless Steel, 0-150mm Range, +/-0.03mm Accuracy, 0.02mm Resolution

  • Hardened stainless steel construction with satin chrome finish, for protection of caliper.
  • Measures outside dimension (OD), inside dimension (ID), step, and depth (when depth bar is included).
  • Raised sliding surfaces to help prevent defacement and wear of scale graduations.
  • Modest, 14-degree face angle on vernier scale, for improving visibility and reducing the possibility of parallax errors.
  • Meets Federal Accuracy Specifications GGG-C-111B.
Check Stock

GEARWRENCH 7 Pc. 3/8\ Drive Long Length Hex Bit Socket Set, SAE - 82537

  • Perfect when the extreme force or torque of a sledge is necessary to loosen or tighten large fasteners.
  • Large striking surface gives you more efficient hammer contact for applying force to the fastener.
  • Handle length permits use in confined areas.
  • Designed to remain engaged with the fastener when the wrench is struck.
  • Offset, round handle design to avoid obstructions.
  • Manufactured from alloy steel and heat-treated for greater strength and durability.
  • Meets or exceeds US Federal Spec. GGG-W-636E.
Check Stock

HONJIE 150mm/ 6\ Mini Double Scale Plastic Vernier Caliper Ruler Measuring Tool Black & White & Blue & Green- (4 Pcs)

  • Hardened stainless steel construction with satin chrome finish, for protection of caliper.
  • Four-way measurement capability for outside dimension (OD), inside dimension (ID), depth, and step measurements.
  • Raised sliding surfaces to help prevent defacement and wear of scale graduations.
  • Modest, 14-degree face angle on vernier scale, to help improve visibility and reduce the possibility of parallax errors.
  • Meets Federal Accuracy Specifications GGG-C-111B.
Check Stock

Yost Vises 10WW-CA 10 Heavy-Duty Ductile Iron Woodworkers Vise

  • Woodworkers vise with 10" jaw width mounts to any bench up to 3" thick to provide clamping action for heavy-duty and professional applications.
  • Ductile iron body with black enamel finish and replaceable cast bronze alloy nut construction provides strength for extended life.
  • Slightly tapered jaws create a solid grip and apply pressure evenly across the top and bottom of vise.
  • Adjustable-height steel lift dog holds a workpiece in place for sanding or scraping.
  • Meets Fed. Spec. GGG-V445, Type I, Class II and NSN 5120-00-221-1114.
Check Stock

Mitutoyo 530-316 Vernier Caliper, Stainless Steel, Inch/Metric, 0-6" Range, +/-0.002" Accuracy, 0.0078" Resolution

  • Hardened stainless steel construction with satin chrome finish, for protection of caliper.
  • Four-way measurement capability for outside dimension (OD), inside dimension (ID), depth, and step measurements.
  • Raised sliding surfaces to help prevent defacement and wear of scale graduations.
  • Modest, 14-degree face angle on vernier scale, to help improve visibility and reduce the possibility of parallax errors.
  • Meets Federal Accuracy Specifications GGG-C-111B.
Check Stock

RIDGID 31025 Model 18 Heavy-Duty Straight Pipe Wrench, 18-inch Plumbing Wrench , Red , Small

  • Sturdy ductile-iron and an I-beam handle deliver long-lasting durability.
  • Designed with a full floating forged hook jaw for superior gripping and quick adjustments.
  • Plumbing wrench features self-cleaning threads with easily replaceable hook and heel jaws.
  • Heavy-duty RIDGID pipe wrenches comply with federal specifications GGG-W65IE, Type ll, Class A.
  • 18-inch (450 mm) pipe wrenches are ideal for pipe diameters of 1 inch (25 mm) to 2 inch (50 mm) with a pipe capacity of up to 2-1/2 inches (65 mm).
Check Stock