ReviewsGigabyte Motherboard Z690i

Cooler Master ARGB LED Controller with 4 x 3-Pin Ports - Multiple Colour Effects, Thermal Detection Mode, 4-Pin RGB Device Compatible

VERSATILE SYSTEM HUB - Can connect to either 4-Pin RGB or 3-Pin ARGB compatible motherboards (ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light or ASRock Polychrome) or function as an independent controller instead..
SPECTACULAR LIGHTING EFFECTS - Features include interchangeable RGB/ARGB lighting control, multiple LED modes, as well as colour and speed adjustments..
BROAD COMPATIBILITY - The Cooler Master ARGB Controller includes a fan-signal wire, case-restart wire, motherboard restart wired, 4-Pin RGB connector, 4-Pin motherboard connector, USB header connector, USB adapter, ARGB 3-Pin motherboard connector, thermal detection wire, and 4 ARGB 3-pin connectors.
THERMAL DETECTION FUNCTION - When connected via the thermal detection cable, real-time temperatures can be monitored and displayed through colour lighting effects..
IN-FRAME MAGNETS - The slim case can be attached to any metallic surface..

Check Stock

GPU Water Block Full-Cover Computer Water Liquid Cooling Graphic Card RBW LED Block for Gigabyte AORUS RTX 2080Ti 2080 2070 2060 (for Gigabyte RTX 2060 Super)

Water block is compatible with Gigabyte AORUS RTX 2080TI RTX 2080 based graphics cards,Pls refer to the compatibility match..
High-performance water block is specially designed for Gigabyte AORUS RTX 2080TI RTX 2080 based graphics cards..
Compatible 5V 3PIN GND Header to connect motherboard to AURA SYNC etc..
AURA effect RBW LED lights built-in, the remote control, driver included..
NOTE: If you are unsure whether compatible, please contact the seller or view graphics brands and models, because the description have mentioned writing compatible ..

Check Stock

USB 3.0 to 2.0 Adapter Header Cable Converter USB3.0 19 Pin Female to USB2.0 9 Pin Male convertor Motherboard from Intel ASUS Gigabyte MSI Ports(19Pin Female to 9Pin Male)

Connector Type: USB 3.0 19 Pin Female To USB 2.0 9 Pin Male. Compatible Devices: USB 2.0 based mother boards, like Intel ASUS Gigabyte MSI Ports..
Custom Made usb 3.0 to 2.0 convertor for installing a USB 2.0 based motherboard into a PC cabinet with Front USB 3.0 Ports..
Allows you to connect internal USB devices directly to the motherboard header connection..
Let your USB 3.0 19 pin device connected the USB 2.0 9 pin motherboard. Data speed: 480Mbps for USB 3.0 device..
12 cm Length - selling in reverse configuration too..

Check Stock

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....

Check Stock

Cooler Master ELV8 Addressable RGB Vertical Universal Graphic Card Holder, Built-in ARGB 3-Pin Strip, Adjustable Length & Height Support

Protect the GPU: prevents GPUs from bending and sagging after long period of use..
Universal GPU support: Compatible with most GPUs using length and height adjustment.
Protect the motherboard: reduces stress on motherboard PCI-E slot by supporting the weight of GPU.
Co-designed with tantric mods: co-designed with one of the top modders and system builders in the world.
Rgb ready: Sync with as US, MSI, Gigabyte and ASROCK addressable for up to 16.8 million colors of control.

Check Stock

LICHIFIT 5V 3PIN RGB VDG Conversion Line Cable Connector for GIGABYTE Motherboard

It can convert your GIGABYTE motherboard 5V 3Pin VDG to normal 3Pin..
Wiring: the arrow LOGO corresponding to RGB Pin 5V..

Check Stock

GA-Z97M-D3H – Socket 1150 – Chipset Z97 – micro-ATX – motherboard

GIGABYTE GA-Z97M-D3H -LGA1150 Intel Z97 Chipset DDR3/ 2-Way CrossFireX/ SATA3&USB3.0/ A&GbE/ MicroATX Motherboard.

Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

【8 Channels Fan Hub】Powering up to 8 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Fan Header, sync with Motherboard Fan Header, 8 channels support(F-1~F-8) and only 1 channel RPM detect support(F-1). Sata Powered, support connect more high performance fans, extended your motherboard fan headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
【PWM Temperature Control】Fan speed can be automatically adjusted by motherboard BIOS pwm temperature function. If 3-pin non-PWM fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub b....

Check Stock

NEON Addressable RGB PC LED Strip, Airgoo 1x16inch 30 LEDs Diffused LED Strip for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Corsair Lighting Node Pro and Corsair Commander PRO

...FFECTS: Total 30 LEDs in this led strip, super bright for modding your pc case which creat amazing RGB sync effects, these lights strips perfect for you DIY gamers to build up any color or animation you desired..
☀2-WAY TO CONTROL: Using Extension Cable A, Connected by 5V ADD RGB 3-pin header (+5V,DATA,N/A,GND) on Motherboard, Compatible with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASROCK Polychrome Sync etc. Using Extension Cable B, to make this led strip easily connect to Corsair Lighting Controller and controlled by Corsair ICUE software (Hub is not included)..
☀PACKAGE INCLUDES: 1x Extension Cable A(for ASUS, MSI, Gigabyte, ASROCK Motherboard ect), 1x Extension Cable B(for Corsair Lighting Node Pro and Corsair Commander PRO), 1 x 16inch Diffused Addressable RGB LED Strip..
☀QUALITY WARRANTY: One-Year Warranty. Any questions for our Airgoo Product both before and after you place the order, contact us anytime, we will reply you within 24 hours..

Check Stock

DELL POWER SUPPLY 825W 80 PLUS GOLD FOR DELL PRECISION T5600 CVMY8 W1FJK

『PCIe 8P - Dual 8P(6+2)』PCIe 8 pin male end to plug into the power connector of Dell motherboard and two 8 pin(6+2) male ends (The 8 pin (6+2)....
『Compatibility』ONLY compatible with Dell T3600 T3610 T5600 T5610 T5610 T7600 T7610 5810 T5810 T7810 T7910 T7920.
『Note』This cable was only designed for the specific types of Dell motherboard as listed in point 2nd, not compatible with other motherboards or....
『Compatibility』Compatible with 6-pin & 8-pin graphics cards from popular manufacturers such as: ASUS, ASRock, Gigabyte, Radeon, Sapphire, NVIDIA....
『Parameter』Length(including the connectors): 13-inch(34cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Part Number:12TRW D92C9,....

Check Stock

Micro Connectors Addressable RGB Extension Cable - 50cm/ 2-Pack, Model Number: F04-01ARGB50-2P

...reates a smooth and stable illumination effect. Total 120 LEDs, super bright for modding your pc case which creat amazing RGB sync effects, perfect for you DIY gamers to build up any color or animation you desired. And you can manage your case cables well to keep them tidy..
【Addressable RGB SYNC CONTROL】Fit for Motherboard with 3-pin Addressable RGB header(+5V, DATA, N/A, GND) , Compatible with Asus Aura, Gigabyte RGB Fusion, MSI Mystic Light, ASROCK RGB LED etc. Before you place the order, make sure there is 3-PIN ARGB header on your Motherboard. If you want to get the lighting effects as shown in the video, please choose our Addressable RGB PSU extension Kit with controller..
【Easy installation & Widely Compatibility】Including 1 x 24 Pin 25cm/9.8inches 18AWG PSU extension cable, 1 x 20cm/7.9inches customized diffused neon led strips. The led strips come with Silicon Tube, it's very soft. The psu extension cable come with Teflon Housing, it may be little hard, but it also can be curved in any shape less than 90 degrees, allowing for stable installation. And it is suitable for E-ATX Motherboard, ATX Motherboard, Micro-ATX Motherboard, etc. power range 250W-1300W..
【QUALITY WARRANTY】One-Year Warranty. Any questions for our Airgoo Product bot....

Check Stock