ReviewsGlass Hole Saw Drill Bit

Drilax 4 Inch Diamond Hole Saw Ceramic Porcelain Tile Quartz Granite Countertop Glass Bottle Super Long Life Vacuum Brazed Technology Single Pack Tile Drill Bit 4 inch

4 inch super long life vacuum brazed diamond hole saw, tile drill bits, glass drill bits, ceramic drill bits for pots.
Standard 3/8 inch shank fits standard drill electric or cordless..
High quality, diamond drill bits, glass drill bit, hole saw drill bit diamond - DRILL THROUGH TILES and Backer Cement Board.
Extra long (tall) diamond drill bits for ceramic tile, diamond core bits for granite and quartz countertop.
Tall enough to go through 3cm thick countertops ceramic tile, diamond core bits for granite and quartz countertop.

Check Stock

JINGLING 2.5mm 3/32\ inch Diamond Small Drill Bit Hole Saw Masonry Tools for Glass Tile Stone Pack of 20Pcs

The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
Use with water as a lubricant, holes require No futher work as cutting is clean.
Start drill at 45 degree to surface and align to 90 degree as hole forms.
Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.

Check Stock

RYOBI Drill and Impact Drive Kit (95-Piece) with Carry CASE

KIT INCLUDES: 19 x Split Point Oxide Drill Bits, 1 x 1” Hex Shank Spade Bit, 4 x Carbide Tipped Masonry Drill Bits, 4 x Brad Point Drill Bits, 1 x 2-1/8“ Hole Saw, 1 x Hole Saw Mandrel, 5 x Hex Shank Nut Setters, 20 x 1” Insert Bits, 1 x Magnetic Bit Holder, 1 x Countersink, 1 x Center Punch, 1 x Hex Key, 1 x Carrying Case.
BLACK OXIDE COATING keeps some of these bits protected from corrosion and prolonged wear.
HOLE SAW MANDREL holds a hole saw and drill bit in place so you can bore holes for door knobs or locks with a power drill.
MAGNETIC BIT HOLDER holds drill bits for driving fasteners without a tool.
CARRYING CASE has mounting brackets and a handle for maximum storage and portability.

Check Stock

JINGLING 6mm 1/4\ inch Diamond Hole Saw Core Drill Bit Coated Masonry Drilling Cutter Glass Marble Tile Granite Pack of 20Pcs

Hole/Outer Diameter: 6mm (close to 1/4").
The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
Use with water as a lubricant, holes require No futher work as cutting is clean.
Start drill at 45 degree to surface and align to 90 degree as hole forms.
Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.

Check Stock

JINGLING 3 mm 1/8' inch Diamond Hole Saw Core Drill Bit Masonry Drilling Cutter Tools for Glass Marble Tile Granite Stone Pack of 20Pcs

The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
Use with water as a lubricant, holes require No futher work as cutting is clean.
Start drill at 45 degree to surface and align to 90 degree as hole forms.
Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.

Check Stock

Diamond Drill Bit Set Hole, 15PCS Hole Saw Set for Glass, Marble, Granite Stone

【Glass Drill Bit】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. Fine workmanship and super wear-resistant, sharp.
【High Quality Drill】Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength.
【Tile Hole Saw 15 Sizes】 6/ 8/ 10/ 12/ 14/ 16/ 18/ 20/ 22/ 25/ 26/ 28/ 30/ 40/ 50 mm，to meet various demands.
【Wide Usage】Used on Drill Glass,Wood,Tile Bottles,Blocks Jars, Ceramic,Slate Mable, Granite Light Stone, and other hard surfaces.
【Attention】Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..

Check Stock

Rokrou Diamond Drill Bits Diamond Brazed Hole Saw Kit 10PCS Tile Drill Bit with Hole Saw Guide from 6 -50mm /1/4\-2\ for Tile, Drill, Glass, Marble, Granite …

【10 ᴛɪᴍᴇs ʟᴏɴɢᴇʀ ʟɪғᴇ ᴛɪᴍᴇ】Processed with brazing technology, premium level super fine diamond sand is attached to the coated steel body. Our Brazed Hole Saw can last 10 times longer than an ordinary hole saw..
【ᴍᴜʟᴛɪᴘʟᴇ sɪᴢᴇs】The diamond hole saw contains ten different sizes, including 6mm/0.24" 8mm/0.31" 10mm/0.39" 14mm/0.55" 18mm/0.71" 22mm/0.87" 25mm/1" 32mm/1.26" 40mm/1.57" 50mm/1.97"..
【ғᴀsᴛᴇʀ ᴅʀɪʟʟɪɴɢ ᴡɪᴛʜ ʙᴇᴛᴛᴇʀ ᴅʀɪʟʟ】Compared to the ordinary material hole saw, our drill with fine diamond sand can drill holes on hard materials such as tile, drill, glass, marble, granite, much faster..
【ᴅʀɪʟʟ ɢᴜɪᴅᴇ】No need to worry about scratching your tile when drilling the hole. Our Adjustable hole saw drilling guide with a suction cup and 4 bearings will hold the diamond hole saw still during the process. From 6mm to 50mm all the hole saws can fit in this guide..
【ᴛɪᴘs】When the diamond drill bit is working, continuous cooling with water is key to reduce the chance of burning your bit, extending the life of the drill..

Check Stock

Glass Drill Bit Set,5 pcs Diamond Bits Hole Saw Bottle Extractor Remover Tool for Ceramics,6-14mm Set Drilling Granite Porcelain Tiles Pot Lamp Quartz Slate Pieces Fish Tank Pack Coated Grit

【EXTREME HARD 】These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes..
【EXTRAORDINARY SHARP】Each diamond hole saw has a smooth and exact finish that lower the incision resistance and drill pressure, increases the sharpness, and effectiveness of water lubrication. Excellent for making clean and precise holes on glass or ceramic and considerably extending drill bit life..
【LARGE CLEARANCE HOLE】These glass hole saw set along the drill bit facilitate the entrance of cooling water and escape of chips and other particles from drilling. Makes the drilling process easier..
【WIDE USAGE】5 varied size drill bits Included with this glass drill bit set to meet various demands. Perfect for drilling glass, tile, porcelain tile, ceramic tile, brick, and stone..
【100% Satisfaction Guaranteed】We are committed to making sure that you have a satisfying purchase experience, so if you have any questions or sugguestions, please contact us.(Log in to your account, check the order ID and click "Contact Seller" to contact us.).

Check Stock

Diamond Hole Saw 50mm 2 inch with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone

Diamond drill bit is diameter of 50mm 2 inch.the cutting depth is 1.06 inch..
The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
Beautiful appearance,excellent antirust function by chrome plating treatment..
Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
We suggest using water to cool the diamond drill bit to prevent overheating..

Check Stock

Diamond Hole Saw 60mm 2-3/8 inch with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone

Diamond drill bit is diameter of 60mm 2-3/8 inch.the cutting depth is 1.06 inch..
The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
Beautiful appearance,excellent antirust function by chrome plating treatment..
Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
We suggest using water to cool the diamond drill bit to prevent overheating..

Check Stock

Diamond Hole Saw with Center Drill Bit for Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone (110mm 4.33inch)

Diamond drill bit is diameter of 110mm 4.33inch.the cutting depth is 1.06 inch..
The shank of the diamond hole saw is round of 3/8" can fit for the 3/8" chuck..
Good quality of diamond,and with special design,there is a center drill bit for positioning function, which is convenient to guide the hole saw,after form the hole..
Beautiful appearance,excellent antirust function by chrome plating treatment..
Excellent results in Ceramic,Porcelain,Tile,Glass,Granite Quartz,Marble,Gemstone.
We suggest using water to cool the diamond drill bit to prevent overheating..

Check Stock