ReviewsGlass Marking Engraver

1500mw Blue Laser Diode Engraving Emitter Blue-violet Laser Diode Head Dot for NEJE 1500mW Engraver Only

  • Design for engraver printer machine, suitable for NEJE 1500mW engraver only..
  • 1500mW blue-violet light laser, higher speed, support more types of materials..
  • Can be carved items included hardwood, plastic, bamboo, rubber, leather, cut paper and so on..
  • Long time use, carving time will last much longer than other laser head and more stable..
  • Note that laser is dangerous, it is necessary to use laser protective glass to avoid eyes injuries..
Check Stock

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10,....
Check Stock

ZBAITU M37 Laser Engraver, 40W Laser Engraving Cutting Machine, 5.5W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU M37 laser engraver cutter has 40W machine power and 5.5W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU M37 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU M37 is equipped with ZBAITU C40 laser module, 5.5W laser output power can engraving and cutting fast enough.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU M37 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, M37 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU M37 laser engraver cutte....
Check Stock

LiebeWH 1pc Laser Diode Head Engraving Emitter Blue-violet Light for NEJE 1000mW Engraver Only to Avoid Eyes IAnjuries

  • 【Professional design】Design for engraver printer machine, suitable for NEJE 1000mW engraver only.
  • 【High-quality】Long time use, carving time will last much longer than other laser head and more stable.
  • 【Features】1000mW blue-violet light laser, higher speed, support more types of materials.
  • 【Appropriate types】Can be carved items included hardwood, plastic, bamboo, rubber, leather, cut paper and so on.
  • 【Supplement】Note that laser is dangerous, it is necessary to use laser protective glass to avoid eyes injuries.
Check Stock

US Stock 50W JPT Fiber Laser Engraver Equipped 80mm Rotary Axis,175mm (6.9in) Lens Laser Marking Engraving Machine fits Gun/Pistol/dogtag/Jewelry

  • ⚡USB WIRELESS ENGRAVER⚡:These engraving tool equiped with Lithium battery and rechargable by USB interface. Cordless using will be up to 30 minutes idling after full charge. Easy to help you finish better engraved craft..
  • ⌚VISIBLE SPEED ADJUST⌚:Metal engraver pen equips with qualify motor. 3 position adjust rotation speed from 5000-25000 r/min to apply different situations. The lowest speed will let you polishing your nail in safe, the highest speed are also working on metal carving..
  • VARIOUS GRINDING BITS: these metal engraving machine kit include 30pcs rotory bits,2 drill bits, 3 saw blades, all these bits are enough to work on engraving, carving, sanding, polishing, etching, routing, grinding, drilling, cutting..
  • BEGIN ENGRAVED ART NOW:these portable and compact etching pen are convience to take anywhere you want and allow you enjoy relaxing hand drill jewelry making time. It can work on metal, glass, ceramic, leather, wood,jewelry,stone or statue..
  • BEST CHOICE FOR BEGINNER:Our metal engraver tools are easy to operate,Create a keychain,DIY a necklace or send gift wi....
Check Stock

Electric Micro Engraving Pen Carve Engraving Tool Kit Cordless Engraver Pen Etching Pen Easy Etcher for DIY Jewelry Making, Metal, Glass, Wood, Leather with Replaceable Diamond Tip Bit

  • 【NO Electricity Needed DIY Carve Tools】- This engraving pen micro pens only powered by 2 AAA batteries (not included). Free from sockets and wires, you can engrave anywhere and anytime..
  • 【Mini Engraving Pen Kit 】- This tool engraver electric engraver pen cordless engraving pen compact size makes it easy to carry. It’s super light and effortless to work. Won’t feel tired even if you use the metal engraver for a long time..
  • 【Handheld Carving Pen, Easy to Use】- This etching tool using a standard 3/32-inch engraving diamond tip bit and safe fingertip controlled on/off switch, safe and easy enough..
  • 【Graver Kit with Extra Diamond Tip Bits Replacement】- You will receive extra 5pcs engraving tip, micro graveur engraving tool kit jewellery making kit cautery pen can be replaced directly with a blunt or broken one, rather than being purchased separately..
  • 【Wide Application of Etching Kit】- Engraving pen for metal, leather engraving kit,electric leather engraving pen, wood engraving, electrical machinery has a 21,000 RPM Motor to be engraved wide variety of materials, like metal, stone, plastic, glass, ceramic, wood, leather and more..
Check Stock

Ebamaz Metal Business Cards Anodized Aluminum Plaque Plate 86X54X0.8mm Black Blank,10PCS

  • 1. Anodized Aluminum material, thick&firm, not easy to bend. The edge also anodized with color. Laser engraved logo will not be removed and easy to....
  • 2. 3.4X2.1X0.031 inch. Similar size as the credit card. Each card is inside individual plastic sleeve to keep them fingerprint-free until time to....
  • 3. High class design, blank /round corner/edge not rough. Suitable as VIP card or gift metal card for company or organization to make it more....
  • 4. Make sure your engraver is powerful enough to engrave metal, ours is fiber laser machine 15W for your reference. These metal business cards can NOT....
  • 5. Notice: CO2 engraver CAN NOT engrave metal material, it mainly engraves wood, Acrylic, leather, plastic, glass, PVC...but not metal.
Check Stock

Customizer Professional Engraving Pen 30 Bits, USB Cordless Electric Engraving Pen Rotary Tools Jewelry Making Engraving Machines Tools for Glass Stone Plastic

  • RECHARGEABLE : Our engraver tool for metal is rechargeable,come with USB cable.The micro engraver pen is built-in safety protection circuit board and intelligent overload protection chip.When the working resistance is too large,it will automatically cut off the power to prevent from damaging the engraving pen.Really safe to use..
  • ADJUSTABLE SPEED AND HIGH PERFORMANCE : Power up to 25W while working,3 levels speeds can be adjustable from 5000-18000 r/min for different materials.Improved high performance 18000RPM motor to provide better control and handling over similar competitors with many other motors in market.Features a durable,lightweight aluminum frame and ergonomic grip to give you precise fingertip control..
  • RELIABLE AND COMFORTABLE GRIP : Our electric engraver pen made of high-strength metal and selected electronic parts are used, which are wear-resistant, wear-resistant and have a long service life. The lightweight and ergonomic grip engraving pen allows you to use it like a pencil, with a comfortable hand feel, better control and precise engraving..
  • VARIOUS GRINDING BITS : These metal engraving machine kit include 30pcs rotory bits, all these bits are enough to work on engraving, carving, sanding, polishing, etching, routing, grinding, drillin....
Check Stock

LaserPecker L1 Laser Engraver, Mini Engraving Machine Portable Laser Etcher, Compressed Spot High Precision Grabadora Laser with Protective Goggles - Black

  • The Most Useful Mini Laser Engraver: Do you want to create inspiration anytime at home? Or want to make exclusive gifts for your friends and family during the holiday season? Or want to customize your logo in small batches? LaserPecker L1 Laser Engraver meet your needs!.
  • LaserPecker L1 Laser Engraver: 0.3mm Compressed Spot, engraving range: 3.9″*3.9″. Focal length: 7.5″(the distance from laser unit to the surface of engraved item). Support power supply through 5V 2A mobile power supply. COULD ENGRAVEING: Wood, Kraft paper, Leather, Fruit, Felt etc. COULDN’T ENGRAVEING: Metal, Glass, plastic, stone..
  • Compact Design: LaserPecker L1 Engraving Machine is very small size, only 2.6″ * 2.4″ * 2.1″, Weight 6 oz, can be mastered in one hand, it is a real handheld laser engraving machine. Perfect for entry-level creators, you can do a lot of inspiration without expensive prices and taking up less space..
  • Durable and Safe: Laser etching machine with high quality 1.6W laser head make durablity, better stability and long working time. Multiple safety features such as Working warning alert, Displacement automatically stops when engraving, Overheat shutdown, Enter password before work will keep you safe from accidents. Safe Certification: CE, FCC, FDA, R....
Check Stock

10W Output Laser Engraving Machine, JICCODA L1 High Accuracy 0.05 * 0.1mm Compressed Spot Laser Cutter Mini CNC Machine with 5.0 Bluetooth Technology Laser Engraver for Wood and Metal

  • [Upgraded 10W Laser mould] 10W JICCODA L1 laser engraver adopts the latest double-layer 5.5W laser technology , which can reach the speed of laser cutting up to 10,000mm/m and cut 10mm thickboard and 5mm acrylic plates at a single pass. The service of the laser module up to 10,000 hours in regular temperature..
  • [Built-in dual motors] Comparing the most laser machine has only one motors ,JICCODA L1 cutter machine master 2 motors inside laser frame in order to keep the laser engraver machine more stable while it engraving..
  • [Ultra-accuracy engraving compressed spot & fast laser cutting] 0.05*0.1mm ultra-accurate compression spot can achieve your varieties laser cutting and laser engraving for wood and metal, DIY creation activities and bring you a distinct grain pattern,vivid picture and clear-cut engraving and cutting experience. FR4 double-sided main board with glass fibre material strength the precise of our mini cnc machine..
  • [Easy assemble]The construction of high-strength aluminum alloy and ABS material makes the JIOOCDA L1 laser machine robust and stable. The laser cutting engraver has a disassembled modular design with the stable performance of the drive plate and the laser tube core with heat dissipation function. The laser engraver and cutting m....
Check Stock