ReviewsGlass Print Bed

Magigoo MPC2018 3D Printer Adhesive Glue, Reduces Warping for Polycarbonate Filament on Glass, PEI, Buildtak, Kapton, 50ml 1.69 fl. oz.

WORKS ON POLYCARBONATE FILAMENTS: specifically built for polycarbonate filaments unlike many other products.
WORKS ON MULTIPLE SURFACES: works on glass, PEI, Buildtak, and Kapton.
EASY USE: applying Magigoo is as easy as child's play. Shake, press, apply to an active printing area. Magigoo PC welds to the 3d build plate bed seamlessly and stops prints from warping. Magigoo PC adhesive properties are designed to release the 3D print once the build plate has cooled & Magigoo PC is easily cleaned with water.
LONG LASTING: Magigoo last for 100+ average prints.
ODOURLESS AND SAFE: Magigoo is not flammable and safe to use.

Check Stock

Magigoo MPA2019 3D Printer Adhesive Glue, Reduces Warping for Nylon Filament on Glass, PEI, Buildtak, Kapton 50ml 1.69 fl. oz.

WORKS ON NYLON FILAMENTS: specifically built for nylon filaments unlike many other products.
WORKS ON MULTIPLE SURFACES: works on glass, PEI, Buildtak, and Kapton.
EASY USE: applying Magigoo PA is as easy as child's play. Shake, press, apply to an active printing area. Magigoo welds to the 3d build plate bed seamlessly and stops prints from warping. Magigoo PA adhesive properties are designed to release the 3D print once the build plate has cooled & Magigoo PA is easily cleaned with water.
LONG LASTING: Magigoo PA last for 100+ average prints.
ODOURLESS AND SAFE: Magigoo is not flammable and safe to use.

Check Stock

Glass Bed, Upgraded 3D Printer Platform Tempered Glass Plate Build Surface Cover for Anet A8 /A6/ A2/ ET4 (220x220x4mm)

BED MATERIAL-100% Genuine Borosilicate Glass is coated with inorganic microporous coating and has a hardness of 8 Mohs, heat resistance up to 400 ℃..
BUILD SURFACE TEMPERATURE SETTINGE- PLA: 50-70ºC TPU: 50-70ºC ABS: 100-125ºC (recommended 110ºC) PC: 100-130ºC (120ºC is recommended) Nylon: 90-120ºC (110ºC is recommended) PP: 100-130ºC (120ºC is recommended) PETG: 50-70ºC.
SIZE&COMPATIBILITY-Build Surfaces have 4 different size to choose 220x220x4mm Works for Anet A8 /A6/ A2/ ET4,235x235x4MM Works for CREALITY Ender3 300x300x4MM Works for Anet E12 E16 A8PLUS ET5 Artillery SW-X1 310x310x4MM Works for CREALITY CR10.
NO EDGE CURLING - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
QUANLITY ASSURANCE-All products in this shop provide free lifetime service.

Check Stock

Comgrow Creality Ender 6 3D Printer Stable Core XY Structure with 3 Times Faster Printing Speed Acrylic Enclosure Silent Board Glass Bed 9.8 x 9.8 x 15.7 inch

...rylic open door structure giving the FDM 3d printer a very elegant appearance. It can seamlessly fit into any area of your home or office with ease. Moreover, 4.3in HD Touchscreen and neat wire arrangement make the machine quite beautiful. Excellent 3d printer for beginners and surprising gift for kids..
Carborundum glass platform: The 3d printer glass bed as its hot-bed evokes a sense of elegance with this machine. More importantly, the superior heat resistance and thermal conductivity of the hotbed greatly improves heating efficiency and bed adhesion, which results in exact smoothness, even on the first layer of the prints..

Check Stock

Creality Ender 3 V2 3D Printer with Silent Mainboard Meanwell Power Supply Glass Bed and Resume Printing Ideal for Beginners Printing Size 220x220x250mm

【Convenient printing】The upgraded ender 3 v2 3d printer can directly use the SD card to print and upgrade the firmware. These upgrades make....
【Self-developed Silent Motherboard】 Creality Ender 3v2 with TMC2208 stepper drivers and 32 Bits Silent Mainboard of version 4.2.2 always ensures....
【Tempered Glass Bed】The Glass Bed is an upgrade of Ender 3 and Ender 3 Pro. It has excellent adhesion and faster heating speed. When you using the....
【Beginner Friendly】Creality Ender 3 V2 is an ideal FDM 3D Printers for DIY Home and School for Beginners, offers easier to understand operations,....
We are devoted to providing high-quality and economical 3D printers, excellent after-sales service to all customers. The 24-hour quick response and....

Check Stock

Sovol SV03 3D Printer Upgraded Larger Printing Size FDM Printer with Direct Drive Extruder & BLTouch & Marlin TMC2208 Silent Board & Glass Bed 350 x 350 x 400 mm

EXTRA LARGE - This printer comes with one of the largest build spaces available. 350x350x400mm (13.8” x 13.8” x 15.8") build volume makes SV03 the....
DIRECT DRIVE - Upgraded direct drive extruder leads to faster retraction with more accurate extrusion, allowing you to not only print with more....
SILENT BOARD & BLTOUCH PREINSTALLED - TMC2208 board has a resolution upwards of 256 individually smaller, high-res steps and thus less noise is....
CARBON CRYSTAL SILICON GLASS BED - This printer comes with a reliable and flat glass bed. Forget about other printers with uneven printing surfaces....
MEANWELL POWER SUPPLY - Built-in 350W Meanwell power supply ensures stable and sufficient power, fast heatup for the hotbed and nozzle. It protects....

Check Stock

Artillery Sidewinder X2 3D Printer, SW-X2 Newest Model 95% Pre-Assembled Ultra-Quiet Rapid Heating Dual Z System Filament Runout Detection Resume Printing 300x300x400mm

Exclusive Ultra-Quiet Stepper Driver - Low decibel even working at fast speeds. With a 300 x 300 x 400 mm build volume. All in one structure, 95% pre-assembly..
Synchronized Dual Z System - Ensure the X carriage always move parallel to the build plate, Increase printing stability. Intelligent automatic bed leveling, precise testing, efficient..
Rapid Heating AC Heat Bed - Lattice glass smooth surface, prints smoothly, easy release of printed objects. Fast and stable heating to 110 ℃ in 2 minutes..
Direct Drive Extruder- 150 mm/s fast print speed, makes high quality print, especially for flexible filament..
Resume Printing - 3d printer has filament runout detection and recovery. If power is lost, prints can be resumed from the last layer, saving time and money..

Check Stock

ADIMLab Gantry Pro 3D Printer 24V Power 310x310X410 Build Volume Resume Print Run Out Detection Lattice Glass Platform Modifiable to Upgrade to Auto Leveling&WiFi

90% pre-assembled 3d printer, dual Z-axis motors and dual Y-axis tracks, supply eccentric nuts to fasten the X/Y/Z pulleys or carriages, make the....
Titan direct extruder and dual fans to cool the hot end, make the extruder system more stable and wear resistant. The operation is more convenient....
Lattice glass is on hot end, make it easy to leveling and first layer stick and get off, the connector for the bed wire will be strong enough to....
Supply resume print and filament run out detection functions, Customer can upgrade the auto leveling& touch screen& wifi functions by self,....
ADIMLab Gantry Pro 3d printer includes: ◆The hot bed with Lattice Glass Platform ◆24V15A UL Certified Power supply ◆Titan....

Check Stock

HICTOP Ender 3 v2 Upgrades Flexible Build Plate PEI Steel Sheet 235x235mm Works for Ender 3/Ender 3 Pro/Ender 5 3D Printers

Hight Flatness/long lasting :Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for the bottom of model.long lasting，The service life of our pei is 10 times longer than other Glass Bed.
easy to use/Easy to clean： simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed.It can be cleaned easily with water or alcohol.
New upgrade: movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives. Reduce workload and save time.
No Edge Curling/Strong adhesion： The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges curling.Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, without using any glue or other tools to help the model to stick onto the sheet.
Packing: Textured steel platform coated with PEI surface *1 magnetic bottom sheet with adhesive on the back *1.

Check Stock

Magigoo MO2016 All-in-One 3D Printer Adhesive Glue, Reduces Warping for ABS, PLA, PETG, Hips and TPU Filament on Glass, PEI, Buildtak, Kapton 50ml, 1.69 fl. oz.

WORKS ON MULTIPLE FILAMENTS: works great for ABS, PLA, PETG, HIPS, and TPU.
WORKS ON MULTIPLE SURFACES: works on glass, PEI, Buildtak, and Kapton.
EASY USE: applying Magigoo is as easy as child's play. Shake, press, apply to an active printing area. Magigoo welds to the 3d build plate bed seamlessly and stops prints from warping. Magigoo adhesive properties are designed to release the 3D print once the build plate has cooled & Magigoo is easily cleaned with water.
LONG LASTING: Magigoo last for 100+ average prints.
Print and print and print some more. Each application can be used multiple times.
ODOURLESS AND SAFE: Magigoo is not flammable and safe to use - be it in a closed room or educational workshop with kids".

Check Stock

Wide Blue Painters Tape, 4 inch x 60 Yards, 3D Printing Tape, Easy Clean Removal up to 21 Days, Masking Tape

Wide Blue Painters Tape - Tapix 3d printer tape is easy to use and remove as well because of its width. The width allows you to put one stripe of tape to cover your print bed instead of cutting and pasting various 1-inch stripes of adhesion tape. For almost all types of the commonly used print bed, only one stripe of Tapix blue tape will be enough to cover your entire printer bed..
3D Printing – Blue painters tape is the preferred use for 3D printing projects. It is simple, cheap and effective. Using our wide painters tape will make it easy to cover your whole 3D printer bed. By applying blue tape to the print bed, you will be able to remove the 3D print from the bed with ease when done printing..
Adhesive - Blue painters tape sticks well to common 3D printing beds. Stripes of tape can be applied to the build platform surface and easily removed or replaced when ready to do a new project. It adheres well to the print bed and leaves no residues behind..
Premium Quality Blue Tape - Blue painters tape is strong, flexible, durable, and versatile. Our 3d printer tape is heat resistant so it can withstand up to 190°F/87°C heated beds and the heat of the filament..
Painting - Wide Blue Painters Masking Tape is a medium adhesive tape that leaves no damage and....

Check Stock