ReviewsGlock 1red Dot Slide

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Ade Advanced Optics RD3-012-G Green Dot Micro Mini Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol

  • This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn bright up and one to turn down. Hold the down button for 3 secs to power off. Every time you turn on the dot it stays the same brightness level last time it was turned off.
  • Comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates(SOLD SEPARATELY) that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plate(SOLD SEPARATELY)..
  • This GREEN dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight. This glock MOS #01 plate need to obtain from glock, not included in this green dot purchase..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo..
  • GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off.
Check Stock

Cyelee CAT Shake Awake Micro Green Dot Sight, 3.5 MOA Reflex Sight for RMS/RMSC Footprint Optics Ready Pistol

  • Micro red dot sight fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, S&W Equalizer, SCCY DVG-1 RDR, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • EASE OF USE: Cyelee CAT Green Dot Sight is always powered on with shake awake function. After four minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting..
  • RUNTIME: Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 200 microampere powers to give a very long battery life.It is perfect for daily carry..
  • RELIABLE:Reliable Design, a concealed carry optic must be ultra- dependable, because you are literally betting your life that it will be ready when called upon. CAT Green Dot Sight is waterproof and shockproof. The integrated co-witness notch provides an added sense of security in critical situations and allows for multiple aiming options..
  • DURABLE: Constructed from aerospace grade alum....
Check Stock

3D Metal Rear Slide Cover Back Plate for Gen 1/2/3/4/5 Glock 9mm/10mm/.40/.45/.357/.380/.22lr Magazine Accessories, Black Skull Red Eyes

  • Glock red dot base plate fits for Glock 17 19 22 23 26 27 34 35 37 41. This highly durable,lightweight,low profile.
  • This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight Fits Vortex Viper/Venom micro red dot sight.
  • Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the screws in the red dot).
  • Replace the rear sight slot with mini red dot base plate. Note: Not fit for RMR, RMS, DOCTOR..
  • Attaches firmly to your firearm for sure performance in tactical situations.
Check Stock

Ade Advanced Optics NUWA (RD3-021) Micro Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO

  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens..
  • ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting. 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5" x (Width)..88" x (Height).89".
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun..
  • Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a di....
Check Stock

ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Kingslayer [Explicit]

  • Fit:Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • EASE OF USE: Cyelee CAT red dot sight is always powered on with shake awake function.After four minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting..
  • RUNTIME: Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 200 microampere powers to give a very long battery life.It is perfect for daily carry..
  • RELIABLE:Reliable Design，a concealed carry optic must be ultra- dependable, because you are literally betting your life that it will be ready when called upon. CAT is waterproof and shockproof. The integrated co-witness notch provides an added sense of security in critical situations and allows for multiple aiming options..
  • DURABLE: Constructed from aerospace grade aluminum with recessed optic lens for added protection ....
Check Stock

ADE RD3-006x Green Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS, Non-Aftermarket Slide) Standard Models, Canik TP9SF and Taurus GX4, G3C & G3 with Factory Steel Sights Pistol

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and....
Check Stock

Glock 19 Holster, IWB Kydex Holster Leather Interior w/ Claw & Optics Cut: Glock 17/19/19X/44/45 Gen(1 2 3 4 5) & Glock 23/32 Gen(3-4), Inside Waistband Concealed Carry, Adj. Retention & Cant, Right

  • COMPATIBILITY: Compatible with Glock17/19/19X/26/44/45 Gen(1-5) & Glock 23/32 Gen(3-4). Incompatible with Glock 23/32 Gen 5 or any laser/light. Please note Glock 17 barrel would come out from holster about 0.5 Inch.
  • KYDEX HOLSTER LEATHER INTERIOR: In order to avoid possible scratches of kydex holster and dropping risks of leather holster. We finally produced this kydex holster with leather interior, it possess kydex’s durable and molded fit. Suede leather interior can avoid possible scratches when holstering and drawing.
  • OPTICS CUT: This Glock 19 holster is cut to accommodate wide variety of optics/red dot.
  • CLAW ATTACHMENT: Claw can eliminate printing made holster more concealable when carrying(We have equipped extra screws for carry without claw).
  • HAND POLISHED EDGE: All WARRIORLAND Kydex holsters edge are polished by hand for comfortable all day concealed carry.
  • PROTECTIVE SWEAT SHIELD: The sweat shield extends to the rear of the slide, shaped to maximize comfort.
  • ADJUSTABLE CANT & RETENTION: The carry angle is adjustable from -5 to +20 degrees. You can also adjust the retention with Phillips Screwdriver for your convenience.
  • LIFETIME WARRANTY – ALL WARRIORLAND holsters possess lifetime warranty, if for any reason you are unsatisfied, please feel....
Check Stock

Glock Sight Mount Plate - Glock 17 19 22 23 26 27 34 35 37 41 Mounting Plate for Mini Red Dot Sight Pistol Handgun Glock Mount Plate Base for Red dot Burris Sightmark Vortex Venom Tactical Hunting

  • Glock red dot base plate fits for Glock 17 19 22 23 26 27 34 35 37 41. This highly durable,lightweight,low profile.
  • This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight Fits Vortex Viper/Venom....
  • Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the....
  • Replace the rear sight slot with mini red dot base plate. Note: Not fit for RMR, RMS, DOCTOR..
  • Attaches firmly to your firearm for sure performance in tactical situations.
Check Stock

Holster for Beretta 20 & 21 Bobcat 22 & 25 Auto

  • ✅ Easy To Install - This Glock clip holster frame draw plate installs in a matter of seconds, and replaces the plastic Glock slide cover with a beautiful CNC machined plate.
  • ✅ No Added Bulk - Since the holster is built right in to the frame plate, the clip holster allows you to simply slide the gun frame down into your pocket, so the clip can catch your pants or belt, just like a pocket knife clip!.
  • ✅ Materials Built To Last - One of the best Glock accessories money can buy, and built to last with high quality, yet lightweight CNC machined tough grade aluminum..
  • ✅ Highly Compatible - The Glock clip holster is compatible with a wide variety of Glock models, including Glock 17, 19, 22, 23, 24, 25, 26, 27, 28, 30S, 31, 32, 33, 34, 35, and 36. Gens 1-4 respectively.
  • ✅ Great Gift Idea - With Glock being one of the most popular handguns on the market today, the Glock holster frame plate draw clip makes a great gift for your favorite gun enthusiast, even if it happens to be yourself!.
Check Stock