ReviewsGlock Coblowback Pistols

Kingslayer [Blu-ray]

  • ...h ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very c....
Check Stock

ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Hunting Magazine Ammo Speed Loader for Glock Magazine Caliber 9mm.40.357.45 Gap Mags

  • Compatible Glock Magazine Calibers: 9mm (9 x 19) / .40 / .357 / .380 Auto & .45 GAP..
  • Works with Magazines for the following Glock pistols: G17, G19, G22, G23, G25, G26, G27, G28, G31, G32, G33, G34, G35, G37, G38 & G39..
  • Note: THis model is "NOT" for use with Glock .45 Auto, G42 Single Stack .380 Auto or 10mm Magazines..
Check Stock

ANQUIPET Pistol Light 800 Lumens Tactical Compact Rail Mount Weapon Light Rechargeable Gun Flashlight with 1913 Or GL Rail Battery Included

  • LIGHTWEIGHT AND ULTRA-COMPACT: This pistol flashlight is small, light in weight and easy to carry, ideal for concealed-carry use. Flashlight for....
  • HUGE PERFORMANCE: Osram Lamp KW CSLNM1 LED inside, 800 LM with 90 meters of throw in the highest brightness, this weapon flashlight provides the light....
  • ADJUSTABLE RAIL: Aside from the adaptability to GL and Picatinny rails, the gun lights for pistols can be easily adjusted forward and backward on the....
  • QUICK DISASSEMBLYINSTALLATION DESIGN: The gun light adopts quick installation design, which is easy to operate and seize the opportunity. The dual....
  • COMPATIBLE GUN TYPE: GLOCK: GLOCK 17, GLOCK 19, GLOCK 20, GLOCK 22, GLOCK 23, GLOCK 25, GLOCK 32.
  • SMITH & WESSON: M&P M2.0 3.6/4.0/4.25 IN., M&P M2.0....
Check Stock

ADE RD3-006x Green Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS, Non-Aftermarket Slide) Standard Models, Canik TP9SF and Taurus GX4, G3C & G3 with Factory Steel Sights Pistol

  • ...h ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very cle....
Check Stock

Bomeek 2 Pieces for Glock Perfection OEM Magazine Speed Loader for 9mm/.40/.357/.380 Auto/.45 Gap Mags Black

  • Compatible for Glock Mag Calibers: 9mm (9 x 19) / .40 / .357 / .380 Auto & .45 GAP.
  • Works with Mag the following for Glock pistols: G17, G19, G22, G23, G25, G26, G27, G28, G31, G32, G33, G34, G35, G37, G38 & G39.
  • IMPORTANT NOTE: THis model is "NOT" for use with for Glock .45 Auto, G42 Single Stack .380 Auto or 10mm Mag.
  • for Glock Factory OEM (2 Pieces Packaged).
Check Stock

Raiseek Front Sight Installation Hex Tool & Armorers Disassembly Tool for Glock

  • Includes 1 armorers disassembly tool for Glock to aid in the removal of pins and base plates on Glock pistols.
  • This pin takedown tool allow maximum comfort handle.
  • The handle makes applying the necessary torque much easier.
  • The tool tip edge has a radius so there is no sharp edge to scratch your gun compared to normal punches.
Check Stock

ADE Zantitium RD3-015 Red Dot Sight + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS,Non-Aftermarket Slide) Standard, Canik TP9SF and Taurus GX4/G3C/G3 with Factory Steel Sight Pistol

  • ...h ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included).Promotes ....
Check Stock

Real Avid Armorer’s Handgun Sight Pusher Sight Tool for Gunsmithing, grey/red

  • ACCURATE: Sight pusher sight adjustment advanced, precision tool to push, change, install and adjusts press fit dovetail front and rear sights on most striker-fire handguns and 1911 pistols.
  • ADJUSTABLE: reversible metal Press Block provides multiple pushing surfaces to accommodate a variety of sights..
  • works on dovetail slots down to 5/32” (4mm) wide.
  • accommodates tall sights up to ½” high.
  • 60-degree surface works with most common rear sight profiles.
  • LEVERAGE: Heavy Duty Torque Handle makes sight adjustments work more comfortable.
  • the integrated 3/8” rachet receiver gives additional leverage if you lack hand strength.
  • SECURE FIT: optional plastic clamps and protective pads help protect finish, while aligning, holding and securing slides. Reduce risk of marring..
  • VERSATILE: Slide cradle accommodates most makes and models of striker-fire handguns and 1911 style pistols Ideal for flat side slides.
  • compatible with Glock style slides, M&P, SIG Sauer P320 style and more. See Compatibility Chart for more information..
  • WORKBENCH TOOL: the Master Sight Tool can be secured directly to your workbench with included bench vise attachment ridge to accommodate numerous work space set-up p....
Check Stock

ADE Bertrillium RD3-013 Red Dot+Rear Sight Optic Mounting Plate/Adapter for All GLOCK (Non-MOS,Non-Aftermarket Slide) Standard models,Canik TP9SF and Taurus GX4,G3C&G3 with factory steel sights pistol

  • ...h ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
Check Stock

OneTigris Gun Holster - Right Handed Nylon Pistol Holster for Most Compact Medium Full Size Pistol 1911 Glock 17 19 20 21 45 M&P Shield 9mm with Under Barrel Attachment (Brown)

  • Wrap-around Design Universal Gun Holster: Fully adjustable & customizable with multiple hook-and-loop straps to fit most of compact and medium to full sized pistols(Compatible with 1911/Glock 17 19 20 21 22 40 44 45/Bretta 92FS/S&W M&P shield 9mm/Sig Sauer P226 P229 P320/Springfield XD/Tp9sfx/etc.).
  • Wrap-around Design Universal Holster: Fully adjustable & customizable with multiple hook-and-loop straps to fit most of compact and medium to full sized pistols(Compatible with 1911/Glock 17 19 20 21 22 40 44 45/Bretta 92FS/S&W M&P shield 9mm/Sig Sauer P226 P229 P320/Springfield XD/Tp9sfx/etc.).
  • Cross-draw 1911 Holster: It fits for most pistols with or without different light/laser sight or other rail-mounted accessories beneath the barrel.
  • Button-Clasp Release for Double Security: Great for gun carry、storage and transportation..
  • Multiple Applications: Everyday use, home defense, range trip, hiking, backpacking, airsofting.
Check Stock