ReviewsGlock Red Dot

Outerimpact Red Dot Adapter/Mount for Glock Pistol - M.R.A

  • Compatible Guns: All Glock models except MOS verions.
  • Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screw purchase required), Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1272.
Check Stock

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Ade RD3-012-G-MOS Green Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn....
  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It also fits Non-Mos model that using a mounting plate to replace rear sight..
  • This GREEN dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to....
  • GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was....
Check Stock

Full Auto Ruger 10/22

  • Comes with an optic adapter/mounting plate to connect red dot sight to Ruger 10/22 and also a standard picatinny mount..
  • The red dot is designed to fit the slide/footprint on the cut made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight..
  • Fully windage and elevation adjustable and lockable.
  • Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Waterproof/Shockproof/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
  • This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,.
Check Stock

Ade RD3-012-G-Delta Green Dot Reflex Sight for Springfield XDM XD-M OSP System Pistol Handgun

  • Does NOT fit the new HELLCAT OSP. This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO....
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to....
  • Fits directly on Glock MOS Gen4 17,19,34,35,40,41 and MOS Gen5 17,19,34. It is also compatible with Any Ade handgun mounts for Glock Barreta HK UPS SW....
  • GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was....
  • 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting....
Check Stock

Ade Advanced Optics NUWA (RD3-021) Micro Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO

  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens..
  • ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting. 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5" x (Width)..88" x (Height).89".
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun..
  • Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a di....
Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
Check Stock

Real Avid 4-in-1 Tool for Glock Handguns, Compact Gun Multitool with Front & Rear Sight Tool, Punch Tool & Gunsmithing Screwdriver for Cleaning & Maintaining Glock Pistols

  • FOR GLOCK PLATFORMS: Comprehensive armorer gun multitool is compatible with any Glock pistol..
  • FRONT SIGHT TOOL: Magnetic 3/16" hex driver fits stock and custom front sights, compatible with Glock night sights, aftermarket tall height sights, Truglo Glock sights, Trijicon Glock sights and more..
  • 3MM PUNCH DOWN TOOL: Essential Glock armorer tool fits all pins on any Glock gun.
  • aids gun disassembly for gun cleaning, pin removal and custom Glock accessories pin installation.
  • REAR SIGHT TOOL: . 050" Allen wrench allows for adjusting aftermarket rear sights for your Glock..
  • COMPACT GUNSMITHING TOOL: Small flat blade screwdriver helps prying slide lock spring & locking block. Also perfect for other accessories such as light, laser or red dot and Holster maintenance..
  • ERGONOMIC DESIGN: Sleek, lightweight frame stores all the tools and features push button release to snap open the tools..
  • COMPATIBLE: With Glock models, 19,17, 43, 26, 22, 48, 27, 45, 21, 42, 30, 34, 20, 44 and more..
Check Stock

Red Dot Sight Reflex Rifle Optic, 3.25 MOA Mini Rifle Shotgun Red Dot Sight, Mini Rifle Pistol Sights with Rail Mount, Auto On & Off, Waterproof & Shockproof & Fog-Proof Red Dot Sight Airsoft

  • ✅[ More Accurate ] The red dot sight is perfect for Glock 19 17 43x 19x 18c. The 3.2 MOA red dot sight is quick to acquire in close quarters while remaining fine enough to promote pin-point accuracy at an extended range.
  • easy to zero and holding zero fairly well and faster. and the red dot sight is support adjustable 8-level brightness control. 6-level red dot brightness settings provide optimal visibility in any light conditions. let shooters cater the dot intensity to the situation at hand..
  • ✅[ Interactive Sensor System ] This reflex sight was engineered. Gaialoop’s IS system allows your new red dot sights to stand by and feel you anytime. Provides optimum operational safety and extends battery life. Great for walking training/target shooting, home defense, and hunting..
  • ✅[ Long Battery Life ] 2 CR2032 Batteries, with a single battery life of up to 4000 hours. With the long battery life span, the red dot makes this the perfect sight to carry on long hunting treks. And the airsoft red dot can automatically power off and wake up to extend your CR2032 battery life with the interactive sensor system.
  • ✅[ Easy to Install and Use ] Our red dot scope comes with instructions, easy to install and use. Precision windage and elevation adjustments featur....
Check Stock

Ade Advanced Optics RD3-012 Delta Red Dot Micro Mini Reflex Sight for Handgun - FDE/TAN Body Color

  • ...oprietary, however, it will look great even the color might be slightly darker or lighter..
  • This ADE RD3-012 Red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates(SOLD SEPARATELY) that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plate(SOLD SEPARATELY)..
  • It is fits directly to "Optics Ready" pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided #1 mount, however the front switch of the sight needs to trim down 2mm..
  • Comes with battery, protective cover, M3x6mm screws for connecting to the provided picatinny plate, picatinny plate, lens cloth, wheel dial reference tool, allen wrench, screw driver, anti-flickering robber shim..
  • 1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A windage and lockable elevation adjustments. Weight approximate 1.6oz..
Check Stock

Swampfox Kingslayer Pistol Cut RMR Foot Print 1x22 Micro Reflex Dot Sights 3 MOA (Red Dot)

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon..
  • The included optic plate for glock also fits Taurus GX4, G3C & G3 with steel rear sights.
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable.
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock