ReviewsGlock Sight Mounts

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

Glock Perfection OEM Adjustable Rear Sight Fits All Models

  • Glock Adjustabel Rear Sight. Fits all Glock Pistol models..
  • Adjusts for both Windage and Elevation with a few simple turns of the adjustment screws..
  • Glock Factory OEM (OEM Bulk Packaged). Manufactured to the same exacting standards as the original, guaranteeing excellent fit and reliable operation..
  • Replace your fixed rear sight with this adjustable sight..
  • New Style (Does not extend over back of slide)..
Check Stock

SAWKE Glock Sight Mount Plate - Glock 17 19 22 23 26 27 34 Mounting Plate Mini Red Dot Sight,Glock Mount Plate Red dot Burris Sightmark Vortex

  • CAUTION: Not fit for RMR, RMS, DOCTOR and Glock m.o.s. system. NOT fit Glock 19 mos..
  • Glock red dot base plate fits Glock 17 19 22 23 26 27 31 34 35..
  • This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight..
  • Fits Vortex/Viper/Venom, Burris Fastfire micro red dot sight..
  • Attaches firmly to your pistol for excellent performance in tactical situations Replace the rear sight slot with mini red dot base plate..
Check Stock

Tool for Glock Tool Kit, Disassembly Tool Compatible with G19 17 25 26 27 43 Accessories

  • 【Compatibility】Front Sight Tool Kit Compatible with Standard Glock 9/40mm, Models: G17, G19, G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41ect. Please note: The Front Sight Tool kit does not work on the G30 round or extended type base plates..
  • 【Magazine Disassembly Tool】 Easily disassemble the Glock Magazine for cleaning and inspection without damaging your components..
  • 【Front Sight Tool】3/16″ Magnetic Hex Driver to install and remove the front sights on all Glock. The strong magnetism keeps your screws from moving randomly..
  • 【Pin Punch Tool】 Help remove all Pins and disassemble all Glocks..
  • 【Material】Front Sight Tool Kit set for Glock made of high-quality aviation aluminum and plastic, wear-resistance and durable..
Check Stock

BASTION Front Sight Tool for Glock | Precise Fit for Sight Removal & Installation | Magnetic Tip Fastener | 3/16 Hex Nut Driver Gunsmithing Tool | Durable Lightweight & Easy to Use

  • WHAT YOU GET: GLOCK FRONT SIGHT TOOL (compatible with all Glock models).
  • PRECISE FIT for sight removal & installation.
  • PRECISE FIT GLOCK FRONT SIGHT REMOVAL & INSTALLATION TOOL: Don’t risk scratching up your Glock with the wrong tool. Our sight tool ensures precise....
  • MAGNETIC TIP ALUMINUM DRIVER | VERY SIMPLE & EASY TO USE: The magnetic tip holds the screw securely for ease of use and better control. DURABLE....
  • BASTION SIGNATURE WORKMANSHIP: Designed with the end-user in mind, it’s compact and functional. Combine it with our punch tool or our disassembly....
Check Stock

ADE Zantitium RD3-015 Red Dot Sight + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS,Non-Aftermarket Slide) Standard, Canik TP9SF and Taurus GX4/G3C/G3 with Factory Steel Sight Pistol

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Batte....
Check Stock

ADE Bertrillium RD3-013 Red Dot+Rear Sight Optic Mounting Plate/Adapter for All GLOCK (Non-MOS,Non-Aftermarket Slide) Standard models,Canik TP9SF and Taurus GX4,G3C&G3 with factory steel sights pistol

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of thos....
Check Stock

Ade RD3-012-G-Delta Green Dot Reflex Sight for Springfield XDM XD-M OSP System Pistol Handgun

  • Does NOT fit the new HELLCAT OSP. This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO....
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to....
  • Fits directly on Glock MOS Gen4 17,19,34,35,40,41 and MOS Gen5 17,19,34. It is also compatible with Any Ade handgun mounts for Glock Barreta HK UPS SW....
  • GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was....
  • 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate. Additional mounting....
Check Stock

Red Dot Sight, Tactical RMR 20mm Red Dot Sight 3 MOA Pistol Scope Adjustable Brightness with Glock Mount, Reflex Sight Red Dot Scope

  • 【Wide Applications】: RMR red dot sight comes with 20mm (0.78inch) Picatinny rail mount and a heightening base. It's compatible with pistols and Picatinny rails. Capable of being mounted on a RMR slide cut on a Glock.
  • 【Fit For 20 Mm Picatinny Rails Mount】: Compact Red Dot Sight Kit includes 20mm Picatinny Rail Mounts Bottom Plate and Low Profile Fixed Mount Bottom Plate, please make sure it is suitable for your model before purchasing..
  • 【Easy to Install】: Forged aluminum housing material. The sight lines have been carefully designed to be perfectly combined. Ultra-light, water- and shock-resistant for improved performance in all weather conditions..
  • 【Multi-Coated Lenses】: High-quality, fully multi-coated lenses provide a clean, wide field of vision. Power and spot intensity controls are located on the left side of the sight glass for easy selection of 6 brightness levels..
  • 【Professional after-sales】: Safe and fast. 1 year product warranty, if you need help, please feel free to contact our customer service, 24 hours online professional customer service..
Check Stock

ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

DPP Titanium Red Dot Mount/Plate/Adapter Compatible with Smith & Wesson M&P TrijiconRMR/SRO&Holosun 407C/507C/508T

  • Include 6 custom .390 Length Mounting Screws Compatible with Trijicon RMR Mounting on Glock MOS and most Optics-Ready pistol. Ensure Maximum Thread....
  • Works with direct pistol slide mounting and all other aftermarket pistols/rifle mounts* Some cut slide use #4-40 screws, the screws come with this kit....
  • Greatly reduces the chance of your reflex sight battery losing connection resulting in flickering or temporary loss of your sight's reticle. The Anti....
  • The kit includes 1X regular sealing plate,1X anti-flicker sealing plate, 6X custom .390 Length Screws (short) and 1X Hex Key..
  • Made from 304 stainless steel with Black finish.100% MONEY-BACK warranty within 30 days of purchase*NO QUESTIONS ASKED. LIFETIME WARRANTY.
Check Stock