ReviewsGlue For Pocket Joints

Miller Dowels 2x Stepped Drill Bit

  • 2X stepped drill bit for Miller Dowel System.
  • Bit is designed to be used with 2X stepped dowels with diameter of 1/2" and length of 3-5/8" long.
  • Miller dowels uses a patented stepped drill bit and dowels that produce better, stronger joints with less effort and set up.
  • The stepped, ribbed dowel design reduces the amount of glue squeezed off as the dowel is driven home creating a stronger adhesive bond.
  • Miller Dowels are a suitable alternative to mortise and tenon, loose tenon, traditional blind or through dowel or biscuit joints requiring less set up and specialized machinery.
Check Stock

Freeman CWS38 3/8' Glue Collated Corrugated W Staples (1000 count)

  • Designed for heavy duty stapling applications such as framing, trusses, pre-fab housing, butt and corner joints, lathing, roofing, cedar shingles, wood furniture assembly, doors, window frames, cabinetry, paneling, upholstery, insulation, pallets, crates, corrugated packaging, and general construction.
  • Compatible with most corrugated staplers capable of firing 3/8" glue collated W type corrugated staples, such as the Freeman PWS16.
Check Stock

DCT Wood Glue Applicator Glue Syringe with Glue Tips – 20 mL Syringe Glue Applicator Wood Glue Syringe for Woodworking

  • REPAIR DELICATE ASSEMBLIES: The DCT Glue Applicator Syringe provides up to 550 PSI of pressurized power to apply glue in small places.
  • Injector syringe holds 20 mL (0.7 fl oz) of water-based wood glues.
  • For veneering, lutherie, craft and hobby gluing, furniture joints, wicker chairs, wooden screen doors, laminates, cabinetry, stair rails and banisters, floor squeaks, or even jewelry making and cake decorating.
  • Additionally use for mechanical work to place fine beads of silicone gasket material.
  • EASY TO LOAD: Includes an easy fill-port design that allows you to load glue into the chamber two different ways.
  • Method 1 – Unscrew top where handle is, pull out plunger, pour in glue, screw top back on, flip syringe with tip upwards, remove air, screw on your desired tip, and apply.
  • Method 2 – Remove brass tip, submerge this end in a glue container, pull plunger back until full, reinstall brass tip, and apply.
  • EASY TO DISPENSE: Dispensing syringe allows you to apply glue under pressure.
  • If you do not enough space to get glue into a joint on your project, instead of disassembly your project, you can drill a small hole and inject glue through the hole into the joint using this wood glue injector.
  • MAINTENANCE: Moisten O-ring before inserting plunger and s....
Check Stock

Q Power QBomb Single 10 Inch Vented Subwoofer Sub Box with Black Bedliner Spray

  • Accu-Tuned10” Dual sealed subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for lower profile....
  • OEM-Fit is designed and engineered specifically for the 1999-2007 Crew cab trucks to ensure an OEM fit without impeding the operation of the back....
  • Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber..
  • Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints....
  • Dimensions Sub Cut Out: 9.125”, Mounting Depth: 5.75”, Width: 45.75” Height: 17”, Depth: 8.25”.
Check Stock

JAYBRAKE Atrend-Bbox E12sv B Box Series Single Vented Subwoofer Enclosure (12)

  • Pro Tuned 12” Single Vented subwoofer enclosure designed for optimum bass response and low frequency reproduction.
  • CNC Miter and Dado design and construction for the ultimate in air tight precision fit of all parts which ensures a rattle and noise free environment.
  • Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly.
  • Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber.
  • Enclosure Dimensions Mounting Depth:13.875”, Sub cut out: 11.125”, Height: 13.625”, Width: 16”, Depth: 17.375”.
Check Stock

Bbox E10ST Pro-Series 10” Single Sealed Wedge Shaped Subwoofer Enclosure

  • Pro Tuned10” Single sealed subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for lower profile sound quality subwoofers..
  • CNC Miter & Dado design and construction for the ultimate in air tight precision fit of all parts which ensures a rattle and noise free environment..
  • Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly..
  • Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber..
  • Enclosure Dimensions Sub cut out:9.125”, mounting depth: 5.5”, Height: 15.25”, Width: 19.875”, Depth1 (bottom): 8.5”Depth 2 (top): 5”.
Check Stock

Atrend SQ-12LSVDD Soundqubed 12 ” Single Vented SPL Subwoofer Enclosure

  • SPL-Tuned 12” Single Vented subwoofer enclosure designed for optimum bass response and low frequency reproduction for Soundqubed subwoofers.
  • 3/4” High Grade MDF Construction for Ultimate structural rigidity and no-flex construction. 2.1Cubic Feet Net Volume internal air space is ideal for high power subs tuned at 38Hz. Designed For SoundQubed 12" Subwoofer..
  • CNC Miter & Dado design and construction for the ultimate in air tight precision fit of all parts which ensures a rattle and noise free environment. Recessed Side Panels increases structural integrity,eliminates unwanted flex and vibration..
  • Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue..
  • Premium OEM Grade Carpeting for factory look and durability. Enclosure Dimensions Mounting Depth:14”,Sub cut out:11.125”, Height: 14.75”, Width: 30”, Depth: 14.75”.
Check Stock

Sili Glue Pod and 3 Sili Micro Glue Brushes with Multi Purpose Sealable Lid/Glue Brush Holder • Fine Tip • Chiseled Tip and Flat Tapered Tip Brushes for Arts • Crafts • Models and Woodworking

  • ...c end is perfect for scraping and removing excess glue from your project..
  • FLAT TAPERED TIPPED BRUSH The Sili Flat Tapered Tipped Micro Brush is the general purpose or spreading brush of the three. The tip is flat and textured so it holds more glue for larger areas on your projects. It’s perfect for dovetails, box joints, larger model surface areas and more! The flexible rubber tip end is used for applying and spreading your adhesive as needed, while the rigid plastic end is perfect for scraping and removing excess glue from your project..
Check Stock

Sili-Brush - Silicone Glue Brush (1" Tip) Glue Dries And Peels Off. Ideal For Wodworking, Arts, Crafts, Around The Home and Hobbyists. Tips Made From Silicone Rubber.

  • ...clean the brush. No more throwing away brushes and no more buying huge multipacks..
  • The handle features a comfortable grip shape for extended periods of use and it also features a flat paddle end with a built in rest. The paddle is perfect for applying small amounts of glue to smaller areas like wood dovetail or box joints. The rest on the paddle end allows the brush to be set down without touching your table top surface..
  • This revolutionary brush makes glue up project fun and enjoyable without the mess. Use the Sili brush over and over again without having to purchase new brushes. The Sili brush tip is made from silicone rubber for easy clean up. The tip is also angled just right for optimal glue application regardless of the project..
Check Stock

NON-ADHESIVE BINDING, BOOKS WITHOUT PASTE OR GLUE

  • Archival material created and made in USA. Lineco is a leading and trusted brand for archival and high quality art, photography, and framing supplies..
  • High quality, extremely high solids, fast-setting, wood frame assembly adhensive that when properly used makes joints stronger than the wood itself. Best glue for picture frames, custom frames, DIY, and more..
  • The PVA glue was formulated for bonding wood that is hard-to-stick or high in moisture content with press times as short as 30 minutes. Can also be used for other art and craft applications, such as gluing wood, board and paper, with excellent lay flat properties..
  • This product is a multi-purpose woodworking adhensive that is excellent for gluing up wood frame, furniture assemble, pressed wood, chip board, plywood, MDF or OSB..
  • The adhesive glue is also successful with other cellulose material as long as one surface chalkpoint properties to withstand colder temperatures during the assembly process. Bonds most type of Formica, cloth, paper, felt and leather..
Check Stock

Innovative Products of America 7864 Pocket Model Grease Joint Rejuvenator Tool

  • Loosens hardened, dried grease in joints.
  • Lubricates bearings on farm, lawn and construction equipment.
  • Cleans, replenishes and maintains old, dirty grease fittings.
  • The pocket model works the same way as the professional model, but is small enough to fit in your pocket.
Check Stock