ReviewsGlue For Spline Joints

StanceMagic 6 Point Spline Drive Tuner Replacement Socket Key Tool for Aftermarket Six-Spline Wheel Lock Lug Nuts - 17.6mm Inner Diameter - for Wrench with 19mm 3/4 21mm 13/16 Hex Socket - Black

1pc 6 Spline Lug Nut Socket Key Replacement. ONLY compatible with 6-sided Spline Type Tuner Locking Lug Nuts with smaller diameter (M12, M12x1.5,....
[Quality] Special coating provides exceptional appearance and corrosion resistance. Manufactured from cold forged steel that can withstand much more....
[Verify Nut Diameter] There are different diameter spline lug nuts on the market. Ensure that the diameter of your 6-Spline lug nut is smaller than....
[Verify Spline Count] Check your lug nut before purchasing. This only works for lug nuts with 6 splines. These will not work on 5-spline or 7-spline....
Works with Multiple Hex Socket Sizes: 19mm, 3/4", 21mm, 13/16"..

Check Stock

High Pressure Glue Injector

Each package contains three glue injectors with caps..
Accordion style plastic body collapses with thumb pressure so glue placement is controlled.
Stainless steel needle tip for pinpoint accuracy will not bend or close up under pressure..
For detail work, forcing glue into furniture joints & cracks or making repairs.
Each injector has a capacity of 1 ounce. Comes with storage cap..

Check Stock

Yonico Finger Joint Router Bits 1-1/4-Inch 1/4-Inch Shank 15131q

Create strong finger glue joints with the Yonico 15131q Router bit. This bit can create finger joints from 7/16" high up to 1-1/4" high. 1/4" Shank.
Create strong finger joints for straight or 90 degree corners for small boxes and crates.
Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge.
Silver induction brazing for maximum strength and durability.

Check Stock

Taytools 500020 5 Piece 15cc Glue Syringe Injector Replaceable Tips

The glue syringes are perfect for applying glue to awkward and hard to reach areas..
They can also be used to force glue into cracks and joints..
Tips can be trimmed to increase flow. Come with replaceable caps..
Can be washed with warm water, and will last indefinitely..

Check Stock

DPAccessories D5245P-2308/24 24 Black 12x1.25 Closed End Spline Tuner Lug Nuts for Aftermarket Wheels

FITS: Aftermarket wheels requiring a lug nut with a conical 60 degree seat and small diameter like spline drive or tuner style nuts..
WILL NOT FIT: Factory OEM wheels or wheels made by the vehicle manufacturer..
SPECS: M12x1.25 thread - Closed End Spline Tuner Style Lug Nuts - Conical 60 Degree Seat - 34.29mm long - 20.32mm wide.
REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part # D5210K for installation and removal. One (1) tool included with this set..
INCLUDES: 24 Black Closed End Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..

Check Stock

BSI / Taytools Bob Smith Industries 5 Piece Set Cyanoacrylate CA Super Glue Including Thick, Medium and Thin Viscosities Accelerator and Debonder Fine Tip Applicators 1-2 Ounce Bottles

Set includes 1 ounce bottle each of thick (Maxi-Cure TM), medium (Insta-Cure+ TM) and thin (Insta-Cure TM) Cyanoacrylate Glue and Debonder (Un-Cure TM) and 2 ounce bottle of Accelerator (Insta-Set TM)..
Insta-Cure (TM) is the thinnest viscosity CA glue offered by BSI. It has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds..
Insta-Cure+ (TM) is BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
Maxi-Cure (TM) is BSI’s thickest viscosity CA glue and is the best CA for most plastics, making it the perfect choice for plastic model assembly.
INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry scent and activates CA without any degrading of the CAs strength. UN-CURE (TM) debonder will soften cured CA to clean up squeeze out, spills or for disassembly..

Check Stock

Spline Wheel Rear Axle Hub, 2Pcs 17T Steel Alloy Spline Wheel Hub, 3 Stud Wheel Hub for Quad Bike ATV Go Kart 50cc 110cc

【Scope of Application】 Spline rear wheel axle hub is suitable for four-wheel motorcycle ATV Go kart 50cc 110cc, very suitable for replacing old or damaged spline wheel hub..
【Long Service Life】Spline wheel hub is made of high-hardness steel alloy, and the surface is coated with golden paint, which has abrasion resistance, corrosion resistance and oxidation resistance, and has a long service life..
【Good Transmission Performance】 Wheel rear axle hub is used for 17T 3 stud spline wheel rear axle hub, which can bring better transmission performance to rear axle hub..
【Simple Installation】 The installation of 3 stud wheel hub is simple, and the spline wheel can be repaired well without any complicated tools..
【After-sales Service】Our store provides you with 100% new and high-quality spline rear wheel axle hub. If you have any questions, please tell us in time, we will solve it in the first time..

Check Stock

DCT Wood Glue Roller Applicator Bottle – 8 oz ounce Wood Glue Bottle with Wood Glue Applicator Roller Dispenser & Cap

EVENLY APPLY GLUE: Use the DCT Glue Spreader Glue Bottle Woodworking Glue Dispenser with Roller to apply even coats of glue on any surface.
Glue container is a lifesaver for extensive glue ups such as building cabinets and more.
Wood glue dispenser will cover more surface area which means better glue joints on your application.
EASY TO USE ROLLER: Load the woodworking glue applicator bottle with glue and squeeze the bottle while moving the roller across your application surface to spread an even layer of glue while saving time and keeping your fingers clean.
Non-stick glue roller applicator has an approximate 2.5-inch (6.4cm) width and provides quick, even, and mess-free coating of glue.
PERFECT SIZE: Wood glue container holds 8 ounces (237mL) of glue and is easy to see through with a transparent plastic construction to allow you to know when you need a refill.
EASY CLEANUP: Included cap is designed to prevent the glue inside the bottle from drying.
Glue squeeze bottle and roller can be cleaned easily with a damp cloth and left to air dry (apply cap to prevent glue from drying).
PACKAGE CONTENTS: Package includes (1) 8-ounce glue bottle with (1) attached roller and (1) standard cap (hole-lug for bottle).

Check Stock

DPAccessories 20 Black 14x1.5B Spline Tuner Lug Bolts for Aftermarket Wheels - 27mm Shank BS27K5HE-BK04020

FITS: Aftermarket wheels requiring a lug bolt with a conical 60 degree seat, 27mm shank, and small diameter like spline drive or tuner style bolts..
WILL NOT FIT: Factory OEM wheels or wheels made by the vehicle manufacturer..
SPECS: M14x1.50B thread - Spline Tuner Style Lug Bolts - Conical 60 Degree Seat - 53.34mm long - 20.07mm wide - 27mm shank length.
REQUIRES: 17mm and 19mm hex spline tool/key part # BS-K-HC-CH04001 for installation and removal. One (1) tool included with this set..
INCLUDES: 20 Black Spline Tuner Lug Bolts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..

Check Stock

DPAccessories LCS3N8HE2BK04020 20 Black 14x1.5 Closed End Duplex Spline Tuner Lug Nuts for Aftermarket Wheels

FITS: Aftermarket wheels requiring a lug nut with a conical 60 degree seat and small diameter like spline drive or tuner style nuts..
WILL NOT FIT: Factory OEM wheels or wheels made by the vehicle manufacturer..
SPECS: M14x1.50 Thread - Closed End Duplex Spline Tuner Style Lug Nuts - Conical 60 Degree Seat - 34.29mm long - 23.11mm wide.
REQUIRES: 13/16 in. (21mm) and 22mm hex spline tool/key part # D5110K for installation and removal. One (1) tool included with this set..
INCLUDES: 20 black closed end duplex spline tuner lug nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..

Check Stock

7 Point Spline Drive Tuner Socket Key Tool for Seven-Spline Wheel Lock Lug Nuts - 20mm Inner Diameter - Compatible with 19mm (3/4) and 21mm (13/16) Hex Socket - Pack of 2

2pc 7 Spline Lug Nut Socket Key Replacement. Compatible with 7-sided Spline Type Tuner Locking Lug Nuts. Typically 14x1.5, 14x2, 9/16x18, 1/2"x20 Threads. Works with Multiple Hex Socket Sizes: 19mm, 3/4", 21mm, 13/16"..
[Quality] Special coating provides exceptional appearance and corrosion resistance. Manufactured from cold forged steel that can withstand much more force than the torque needed to secure the nuts on your vehicle..
[Verify Nut Diameter] There are different diameter spline lug nuts on the market. Ensure that the diameter of your 7-Spline lug nut is smaller than 20mm..
[Verify Spline Count] Please double check your lug nut before purchasing. This only works for lug nuts with 7 splines/grooves, as there are multiple spline types on the market..
[Verify Nut Length] This will not work for lug nuts longer/taller than 2.25"..

Check Stock