ReviewsGm Battery Terminal Adapter

Ten F1 to F2 Terminal Adapters for Lead Acid Battery - Step Up Adaptor

  • Package Includes : Ten Terminal Adapters.
  • Compatible with Sealed Lead Acid Batteries With an F1 Connector.
  • For 12v 5Ah, 12V 7.2Ah, 12V 8Ah, 12V 12Ah, 12V 10Ah that has F1 terminal.
Check Stock

Ampper Brass Long Stud Side Post Battery Terminal Bolt Standard Battery Side Post Extender Stud for GM Post Pack of 2

  • Brass standard side post battery extender terminal long side stud for GM battery post adapters..
  • One side (short side) stud thread: 3/8"-16, the other side (long side) stud thread: 3/8"-24..
  • Easy to install: direct fit replacement unit..
  • Used for side post bolt extender and wire directly hook up to battery..
  • 100% SATISFACTION : no reason for return or change, hassle free 1 years ..
Check Stock

Kicker 46BT4 Car Audio Positive - Negative Power Wire Cable Battery Terminal BT4

  • The KICKER BT4 battery terminal works with 1/0 to 8 Gauge wire..
  • This battery terminal uses Versa-Gauge connection points with oversized convex screws for rock-solid connections..
  • The wire receptacles work perfectly for clean, sharp install and a negative-post adapter collar that locks into place..
Check Stock

Power Wheel Adapter for V20 Craftsman 20V Battery with Fuse & Wire terminals, Power Connector for Rc Car, 14 Gauge Robotics, Rc Truck,DIY use, Work for MAX CMCB204 CMCB202 CMCB201 CMCS500B Battery

  • ... heat-resistance 14 AWG wire which own 20A max permissible current, you can use it safely..
  • Perfectly compatible : work with for V20 Craftsman 20V MAX CMCB204 CMCB202 CMCB201 CMCD700C1 CMCS500B Li-ion batteries. Easy to install ,locks on you battery very well..
  • Easy to DIY operate: The adapter is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the power cord of the adapter faster and better..
  • Multi-scene use: Power wheels adapter has 12.5 inches of 14 gauge wire installed.
  • You can use it to upgrade your power wheels, Rc toys, Robotics DIY etc. Maximum permissible current 20A. This adapter will surely allow you to quickly and safely upgrade your power wheel and enjoy the beauty of DIY..
  • Tips: The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal.When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter.If you don’t use it for a long time, please be sure to remove the battery form the adapter..
Check Stock

Power Wheel Adapter for Dewalt 18V & 20V DCB205 DCB206 DCB200 Li-ion Battery, Power Wheels Battery Converter Kit with Switch & Fuse & Wire terminals, Work for Rc Car, 14AWG Robotics, DIY use(2 Packs)

  • ... and safely upgrade your power wheel and enjoy the beauty of DIY..
  • Work for Dewalt 18V 20V DCB 183 DCB200 DCB203 DCB205 DCB206 Li-ion batteries. Easy to install ,locks on you battery very well..
  • The adapter is equipped with wiring terminals, which is convenient for you to connect the power cord of the device with the power cord of the adapter faster and better..
  • The red wire is connected to the positive terminal, and the black wire is connected to the negative terminal.When using, make sure that the positive and negative wires of the device correspond to the positive and negative wires of the adapter.If you don’t use it for a long time, please be sure to remove the battery form the adapter.
Check Stock

ACDelco GM Original Equipment 15-73952 Heating and Air Conditioning Panel Mode Door Actuator

  • Corrects mode door malfunction caused by a failed actuator. Body Material- Plastic.
  • GM-recommended replacement part for your GM vehicle’s original factory component.
  • Offering the quality, reliability, and durability of GM OE. Terminal Type: Pin.
  • Manufactured to GM OE specification for fit, form, and function.
Check Stock

Wokyy 2 Pack Power Wheels Adapter for Makita 18V LXT Lithium-ion Battery BL1860 BL1850 BL1840 BL1830 BL1815 Dock Holders Power Connector 14 Gauge Robotics

  • 2 PACK & 100% BATTERY COMPATIBILITY - The package comes with 2 PACK battery adapter. Compatible with Makita 18V LXT Lithium-ion Battery BL1860 BL1850....
  • VERSATILE BATTERY ADAPTER – With 6 inches 14-gauge wires, this adapter can turn your battery into power source for your child’s power wheels, toy....
  • TWO SCREWS MOUNTING – With two screws holes, you can fix it on walls, cars, machines, or anywhere you like with two screws we provide. Ergonomic....
  • WELL BUILT ADAPTER – Made of high-quality ABS material, the injection-molded adapter ensures its excellent resistance against shocks, heat, and....
  • PUTTING SAFETY FIRST – Please note that this adapter is NOT a charger. The red wire is the positive terminal, and the black one is the negative....
Check Stock

RC Car Battery Charger Nimh NiCd Battery Packs Charger 4.8v 7.2v 8.4v 9.6v | 4.8v - 6.0v Rc Receiver Rx Battery Pack Charger

  • The 12V 400mA-700mA NiMH battery charger can charge NiMH/NiCd battery packs that are 4.8V, 6V, 7.2V, 8.4V, 9.6V 12.0v (2-8 cells). NOTE: This charger is only for recharging NiMH/NiCd batteries pack, DO NOT charge LiPo batteries, li-Ion battery or any type of lithium battery.
  • AC to Dc power adapter charger with terminal barrel plug 55mm (outer diameter) x 21mm (inner diameter) can be used to charger FrSky Taranis X9DP/X9E transmitter battery and other device.
  • RC Car Battery Charger for NimH NiCd battery pack froAC to Dc power adapter charger with terminal barrel plug 55mm (outer diameter) x 21mm (inner diameter) can be used to charger FrSky Taranis X9DP/X9E transmitter battery and other device.
  • There is light indicator on the charger and tells charging status. Solid red light means charging is processing, green light means charging finised. If you see flash red light means the polarity of battery is reversed or charger cannot charge your battery.
  • ADVANCED PROTECTIONS - Charger has built-in safety protections against reverse polarity, short circuit, and over-current protection. The universal 100-240V AC input enables this charger to be used anywhere. Buy with confidence under 12-month warranty..
Check Stock

The TAB Battery Book: An In-Depth Guide to Construction, Design, and Use

  • SAE battery connector extension cable is heavy duty 10AWG wire which can reduce power loss, thick and durable. The inner core of the cable is made of high quality copper wire. Length: 60cm/2ft. Rated Voltage: 600V..
  • The SAE connector is equipped with a dust cap. When the cable is not in use, the dust cap covers the SAE connector to keep the inside of the connector clean and dry. Waterproof and dustproof. Thus extending the service life of the cable..
  • The other end is 0.32"/8mm Tin plated Ring Terminal. Comes with 15A, 20A, 30A fuses for electrical protection to meet your different needs. Heat and corrosion resistance, which can work normally in a wide voltage range of DC 12-24V..
  • Specially designed for extending car or motorcycle battery charging terminals, maintaining a trickle charge saves the battery. Not only can it be powered directly from the motorcycle's existing SAE socket, it can also be powered from the battery by connecting to a ring terminal extension cord..
  • Package include: 1 Pack SAE to ring terminal extension cable, 3PCS 15A/20A/30A fuses, 1PC SAE to SAE polarity reverse adapter..
Check Stock

Recoil 2 Pack Premium Solid Brass Positive Negative Battery Terminals Clamps with Two 0/2/4 Gauge Outputs and One 4/8 Gauge Output

  • 2 Pack of positive or negative battery terminal clamps, which connects to the positive or negative battery posts with adapter collars..
  • Each battery terminal splits the connection to three outputs, two 0/2/4 gauge outputs and one 4/8 gauge output..
  • Made from forged and machined brass for the best power transfer possible, unlike other cheap zinc battery terminals..
  • Oversized convex screws for rock-solid connections. Marine-grade satin chrome finish for superior corrosion resistance..
  • High-temperature Polycarbonate cases provide insulation and protection..
Check Stock

SUNMORN Battery Terminal Connectors, 0/2/4/6/8 AWG Battery Terminals, Heavy Duty Car Battery Terminal, Top Post Multiple Battery Terminal, with Shims Protector Cover

  • ☀ 【Battery Terminal】Heavy Duty High Quality Car Audio Amp Battery Terminals, Nickelplate..
  • ☀ 【Universal Fit】Universal battery terminal comes with a positive or negative adapter suitable for most models battery..
  • ☀ 【EASY INSTALL】0/2/4/6/8 AWG Inputs. Gold Screws Terminals Hold Cables Securely in Place. Easy to replace, fast installation, good conductivity..
  • ☀ 【Material Durable】Automotive Replacement Battery Terminals Ends, Strong Electrical Conductivity, Super Corrosion Resistance, Reduce Current Transmission Loss. Good Workmanship..
  • ☀ 【Excellent Service】Package Include 2 x Quick Disconnect Quick Release Car Marine Military Top Post Multiple Battery Terminals Connectors, 2 x Adjustable Shims, 2 x Protective cover. If you are not 100% satisfied with your order, we will refund you, no questions asked! !.
Check Stock