ReviewsGood Adhesion

KILZ Adhesion Primer, Interior/Exterior, 1 Quart

A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray..
KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere..
Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint..
Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents. KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour..
This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square feet per gallon. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend Rankings..

Check Stock

24 Pairs Adhesive Eye Glasses Nose Pads, D Shape Stick on Anti-Slip Soft Silicone, Adhesive Nose Pads Glasses Nose Pad for Glasses, Eyeglasses and Sunglasses

...sign: the D-shape designed nose pad is thick enough, making the eyeglasses fit you well, more comfortable and steady to wear, avoiding glasses sliding down your nose easily.
It's made of soft and elastic silicone material, light to reduce your nose's burden.
Good adhesion: strong adhesion on the back of nose pads can avoid easily slipping while you are working or doing exercises.
To ensure the good use effect, please make one-time paste, not repeatedly.
Wide applications: these stick on glasses pads fit for various kinds of eyeglasses, sunglasses and spectacles, good for plate optical frames, plates plastic frames and so on, bringing convenience to your life.
Easy to use: firstly, gently clean the application area with alcohol or water.
Secondly, wait for several seconds until it is thoroughly dry.
Thirdly, just stick the on your eyeglasses frame, press and hold for a few minutes to ensure adhesion of sticky nose pads.

Check Stock

3M Flexible Bumper Patch Kit, 05888, Black, 4 in x 8 in

Reinforces the backside of bumpers needing repair.
No sanding needed for application and adhesion.
No cure time delay to proceed to front side repair.
Effective on many plastics where a reinforcement is needed.
Clean appearance for a good backside cosmetic finish.
Includes 6 flexible patches and 6 adhesion promoter packets.

Check Stock

Inland 1.75mm Blue PETG 3D Printer Filament Dimensional Accuracy +/- 0.03 mm - 1kg Spool 2.2 lbs

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the....
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more....

Check Stock

Miele GP CL DGC 251 L DGClean Combi-Steam Oven Cleaner

DGClean 8.5 fl oz. for perfect cleaning results with Combi-Steam Ovens.
Ultra-powerful grease cutting capacity without odor build-up.
Effortless cleaning thanks to good adhesion.
Perfect adhesion even on vertical surfaces.
Food safe and Best care for many years of reliability.

Check Stock

KILZ Adhesion Primer, Interior/Exterior, 1 Gallon

A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces. Use on properly prepared surfaces free of dust, grease, chalk, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray..
KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere. Viscosity - 93 - 100 KU. Roller - Smooth Surface - 3/8 - 1/2 inch nap.Roller - Porous Surface - 1/2 - 3/4 inch nap. Spray Pressure - 2,500 - 3,200. Spray Tip -.015 - .021 inches.
Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint..
Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents. KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour..
This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square f....

Check Stock

24 Pairs Adhesive Eye Glasses Nose Pads, D Shape Stick on Anti-Slip Soft Silicone, Adhesive Nose Pads Glasses Nose Pad for Glasses, Eyeglasses and Sunglasses, 15 x 6 x 1.5 mm (Transparent)

24 Pairs of nose pads: you will get 24 pairs of D shape anti-slip silicone eyeglasses nose pads in transparent, enough quantity to use.
Each nose pad is approx. 15 x 6 x 1.5 mm (L x W x T), suitable for most plate eyeglasses frame.
Practical and comfortable design: the D-shape designed nose pad is thick enough, making the eyeglasses fit you well, more comfortable and steady to wear, avoiding glasses sliding down your nose easily.
It's made of soft and elastic silicone material, light to reduce your nose's burden.
Good adhesion: strong adhesion on the back of nose pads can avoid easily slipping while you are working or doing exercises.
To ensure the good use effect, please make one-time paste, not repeatedly.
Wide applications: these stick on glasses pads fit for various kinds of eyeglasses, sunglasses and spectacles, good for plate optical frames, plates plastic frames and so on, bringing convenience to your life.
Easy to use: firstly, gently clean the application area with alcohol or water.
Secondly, wait for several seconds until it is thoroughly dry.
Thirdly, just stick the on your eyeglasses frame, press and hold for a few minutes to ensure adhesion of sticky nose pads.

Check Stock

Inland 1.75mm White PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.

Check Stock

Inland 1.75mm Black PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.

Check Stock

Door and Window Sealing Strips, Silicone Seal Strip,Self-use Decoration Sticky Door Seam Windproof Sound Insulation and Warm Waterproof Strip (35mm, White)

【Doors and Windows Seal】Total of 16.4 feet length, Environmentally friendly silicone material, good flexibility, good stretching performance. The sealing strip is excellent flexibility, high resilience and super Durable. Non-toxic and environmental,it is great for family use..
【Strong lamination】Double-sided adhesive backing strong adhesion, not easy to fall off. The sealing strip uses super glue for long lasting adhesion..
【Super Easy Install】The Silicone Sealing Tape is easy to tear off without the adhesive damaging the surface. Silicone tape is quality strong adhesion but will not damage the surface. Before applying the door bottom weather stripping, make sure the surface of adhered is smooth, clean, and dry..
【Applicable scope】For weather stripping door seal strip for frameless sliding doors, glass doors, plastic-steel windows, aluminum windows & closet , can be windproof, dustproof, sound insulation and noise reduction..
【After-comstomer Service】All we want is to let every customer feel happy with this purchase. If you are not Satisfied with your purchase for any reason, please to contact us. We will respond your message within 24 hours. If there are any product quality problem, we have free return policy..

Check Stock

Inland 1.75mm Translucent Blue PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Spool (2.2 lbs)

1 KG (approximately 2.2 lbs) Spool/ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
Recommended Extrusion/Nozzle Temperature: 230°C - 250°C (440°F - 480°F)/ No heated bed needed/ Vacuumed sealed with desiccant.
PETG Filament Features: Durable/ good adhesion/ high strength/ high temperature resistant/ low shrinkage/ smoother finish/ odorless, combines the advantages of both PLA and ABS.
Premium Quality: Inland PETG 3D Printer Filament Undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time creating! 100% satisfaction guarantee provided.

Check Stock