ReviewsGood And Cheap Carbon C60s

Face Mask with Filter Pocket Hamsa Washable Reusable Face Bandanas Cloth Balaclava with 2 Pcs Filters Black

  • 100% Polyester.One Size : 20cm X 15cm(7.8" X 5.9")It Is Very Soft, Breathable, Water-Repellent, And Washable. Uitable For Most Adults.And Also....
  • The Length Of The Mask Cord Is Adjustable, And It Can Be Adjusted According To How Tight You Feel Comfortable. The Mask Is Equipped With An M-Shaped....
  • Making It Soft And Comfortable To Your Face, Very Effortless Breathable To Wear, Has Good Breathability,Easy Breathing, And It Won'T Induce....
  • Equipped With Two Replaceable 5-Layer Activated Carbon Filter.The Mouth Cover With Filter Pad Can Filter Air, Prevent Dust, Pollen, Chemicals, Smoke....
  • High Quality Soft And Comfortable Mask, Not Cheap Material That Easy To Pill Or Tear.
  • It Is Thin And Lightweight, Breathable Without Feeling....
Check Stock

4PCS Universal Car Door Lock Knobs, Carbon Fiber Interior Door Lock Knob Pull Pins, Door Knob Covers Door Knob Lock Truck Interior Accessories for Cars Vehicles Auto

  • 【Car Door Lock Knob 4 Pack】Our door bolt lock pin lock set includes 4 pieces door lock pin covers,can meet your car interior decor needs. Compatible with most BMW models..
  • 【High Quality】 These car lock knob pins are made of carbon fiber, sturdy and durable, not easy to deform and fade, resistant to corrosion or rust, smooth to touch, reliable for long time use, a nice cheap upgrade from the factory plastic ones..
  • 【Easy Installation】 Simple screw off the old door lock caps and screw these on until snug, very easy to install. They do a fine job of disappearing when the doors lock and are smooth with the door panel which is nice when you put your arm out the window..
  • 【Elegant Design】 Our car interior door lock knobs not only matches very well on the inside of your car, but also acts as a little reminder when you forget to lock the door. Good looking upgrade to the interior of any vehicle..
  • 【Size Information】these carbon fiber knob covers measure about 1.37 inches in height, 0.31 inch in diameter, suitable for most types of cars with door locks, please check the size before purchasing. Dodge NOT FIT.
Check Stock

Fielect Carbon Fiber Strip Bars 1x3x200mm Length Pultruded Flat Carbon Fiber Bar Strips for Kites,RC Airplane 5 Pcs

  • [High Material]- This carbon fiber strip is made of carbon fiber with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance and high strength..
  • [Advantages]- This carbon fiber strip is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments..
  • [Application]- Pultruded carbon fiber strip bar is suitable for racing drones, RC helicopter wing, RC airplanes and RC sailboats, kite spars..
Check Stock

Fielect Carbon Fiber Strip Bars 2x19x200mm Length Pultruded Flat Carbon Fiber Bar Strips for Kites,RC Airplane 1 Pcs

  • [High Material]- This carbon fiber strip is made of carbon fiber with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance and high strength..
  • [Advantages]- This carbon fiber strip is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments..
  • [Application]- Pultruded carbon fiber strip bar is suitable for racing drones, RC helicopter wing, RC airplanes and RC sailboats, kite spars..
Check Stock

Cold Steel Cheap Shot 130 Tactical Crossbow Package - Includes 6 Crossbow Bolts and Red Dot Sight

  • QUICK, EASY RELOADING: It doesn’t matter if you are standing, kneeling, sitting or laying on the ground, the Cheap Shot 130 is lightning quick to....
  • PHENOMENAL ACCURACY: What really sets the Cheap Shot 130 apart is its amazing ability to shoot a 3-inch group at 30 yards in literally a few seconds.
  • FAST FIRING: Shoots at up to 226 feet per second.
  • FEATURE-PACKED: Quick and easy to set up, take down and transport.
  • Features an adjustable length of pull, Picatinny accessory rail and detachable....
  • ACCESSORIES INCLUDED: Comes with everything you need to shoot right out of the box, including six (6) 15-inch carbon crossbow bolts (175 grain),....
Check Stock

IEMAI Carbon Fiber PLA 3D Printer Filament, Carbon Fiber Filament 1.75mm, PLA Filament Spool 1KG, Dimensional Accuracy +/- 0.02mm Black Filament for 3D Printer

  • IEMAI CARBON FIBER PLA 3D PRINTER FILAMENT - 100% virgin material without cheap plastic fillers, Vacuumed Sealed With Desiccant. Carbon Fiber (containing 20% carbon fiber , in weight) is combined with PLA to form a strong plastic which is ideal for printing items requiring added strength, more abrasive than standard PLA..
  • PLA Filament -- Material : 80% PLA filled with 20% Carbon fiber . Weight: 1 KG (approximately 2.20 lbs) . Color: Matte Black . PLA filament is made of high-strength, high-modulus fiber material, full mechanical winding and strict manual examination, which guarantee the filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc..
  • PLA 1.75 mm - High Dimensional accuracy - 1.75 mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing. Recommend Printing Temperature: 190℃-220℃/374°F-428°F( dependent on printer model). Recommended Print Speed: 50-100mm/s. Heat Bed temperature: 50 – 60°C/122°F-140°F..
  • Carbon fiber filament is a tough material with a nice matte finish. The increased strength provided by the carbon fiber particles contributes to greater dimensional stability, helping to avoid warping and....
Check Stock

Venustas Women's Heated Thermal Underwear Pants with 5V Battery Pack, Winter Warm Base Layer Bottom Set Long Johns

  • ...tivities like in other seasons. With heating elements on the abdomen, waist, and knees, our heated underwear for women provides cozy warmth that helps you maintain comfortable indoors and outdoors..
  • UPGRADE HEATING PERFORMANCE: Venustas women's heated underwear adopts carbon fiber high-tech which makes it so unique and better than ever. Venustas women's heated underwear takes a leap in heat performance thanks to the remarkable electro and thermal conductivity, and damage-proof ability of carbon fiber. It will heat before you can notice it. Warmth spread across your body in seconds..
  • Up to 11hrs Heating Time: 3 adjustable heating options offer customizable temperatures for different needs. Powered by a 5V, 10,000mAh lithium battery, Venustas electric underwear for women delivers instant warmth within a few seconds and can last up to 11 hours at the low level, 6 hours at the middle level, and 4 hours at the high level..
  • So Soft and Comfortable: While cheap lightweight fabric leaves you feeling scratchy, strangled, or trapped, our heated long underwear made of Cationic Polyester Fiber and Polyester is buttery soft an....
Check Stock

Heyiarbeit 2mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 400mm 15.75 Inch 10pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock

Samsung DA29-00020B DA29-00020A HAF-CIN EXP Premium Genuine Refrigerator Water Filter 1 Pack

  • With an affordable price, this Waterdrop DA29-00020B refrigerator water filter replacement offers the best - a mix of prior filtration performance and....
  • [Deep filtration] This Waterdrop WDS-F27 replacement water filter for Samsung refrigerators is certified by NSF against NSF/ANSI 53, 42 &372....
  • [Perfect fit] You don't need to worry about water leaks due to improper or loose replacement refrigerator filters. This Waterdrop Replacement....
  • [Top-notch filter material] Here, We've made a major improvement over a less efficient charcoal filter that relies on coal, wood, walnut husks and....
  • [Fresh-tasting water] Unlike cheap and mixed carbon blocks, the 100% natural coconut shell carbon block adopted by our Waterdrop refrigerator water....
Check Stock

Flight Pro Triple Bearing Medium 5” Blue Chinese Yoyo Diabolo Toy with Carbon Sticks

  • Flight Pro™ Long Spin Triple Bearing Design. Includes Net Carrying Bag. Includes Cushioned Carbon Sticks. Even includes 1 Extra 72 inch Diabolo String for when your first string wears out..
  • Medium / Large 5 inch diameter high performance Triple Bearing Professional Diabolo / Chinese yo-yo / skill toy. Perform all of your favorite Chinese Yoyo Diabolo tricks, throws, catches and cradles..
  • Includes 13.5 inch carbon fiber hand sticks with durable, comfortable foam handles for superior grip, and approximately 72 inches of string. Weight: 242 grams. Diameter 5 inches. Width 5.75 inches. Perfect size for speed and handling..
  • Full length string can be shortened for smaller players. Triple bearing, one way axle for super long spin times and pro level diabolo play..
  • Stop searching and buy this diabolo today! Don’t be fooled by other cheap diabolos that are tiny and impossible to use!.
Check Stock

Heyiarbeit 1.5mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 200mm 7.87 Inch 5pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock