ReviewsGood Corrosive Resistance

Heyiarbeit 1.5mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 200mm 7.87 Inch 5pcs

  • 【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
  • 【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
  • 【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
  • 【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.
Check Stock

Dow Corning Molykote 33 Medium Silicone Low Temperature Bearing Grease Lube, Medium NLGI #2 Consistency Grade, 57g or 2oz

  • Low evaporation. High oxidation resistance. Good resistance to water wash-out..
  • Resistance moisture and corrosive atmospheres. Inertness. Good shear stability..
  • Wide service temperature range: -100ºF to 400ºF (-73ºC to 204ºC). Compatible with many plastics..
  • Used to lubricate plastic gears, bearings and cams, as well as metal and rubber parts..
  • SAFE for O-Rings and Other EPDM, Buna, Rubber and Plastic Seats/Seals/Gaskets..
Check Stock

Dow Corning Molykote 33 Medium Silicone Low Temperature Bearing Grease Lube, Medium NLGI #2 Consistency Grade, 14g or 0.5oz

  • Low evaporation. High oxidation resistance. Good resistance to water wash-out..
  • Resistance moisture and corrosive atmospheres. Inertness. Good shear stability..
  • Wide service temperature range: -100ºF to 400ºF (-73ºC to 204ºC). Compatible with many plastics..
  • Used to lubricate plastic gears, bearings and cams, as well as metal and rubber parts..
  • SAFE for O-Rings and Other EPDM, Buna, Rubber and Plastic Seats/Seals/Gaskets..
Check Stock

Dow Corning Molykote 33 Light Silicone Low Temperature Bearing Grease Lube, Light NLGI #1 Consistency Grade, 14g or 0.5oz

  • Low evaporation. High oxidation resistance. Good resistance to water wash-out..
  • Resistance moisture and corrosive atmospheres. Inertness. Good shear stability..
  • Wide service temperature range: -100ºF to 400ºF (-73ºC to 204ºC). Compatible with many plastics..
  • Used to lubricate plastic gears, bearings and cams, as well as metal and rubber parts..
  • SAFE for O-Rings and Other EPDM, Buna, Rubber and Plastic Seats/Seals/Gaskets..
Check Stock

TRANSTAR 6131 Gray 2K Epoxy Primer/Sealer - 1 Gallon

  • RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR.
  • The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating.
  • It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance.
  • Can be applied directly over surface rust.
  • 1L covers approximately 60 sq feet at 3 MIL.
  • Salt spray resistance test completed at 003e1000 hours according to ASTM B117 at an independent laboratory.
Check Stock

IQQI 99.95% Tungsten Fine Wire,Length : 1M,Easy to Be Processed(0.01mm-1.5mm),1.5mm/1 Meter

  • Microstructure, mechanical properties, molding ability, plasticity, good toughness and deformation, easy to be processed..
  • High temperature resistance 800-1250 degrees, anti-oxidation..
  • Acid and alkali resistant, used for transporting highly corrosive gases and liquids.
  • alkali resistance, seawater resistance and acid corrosion resistance..
Check Stock

IQQI 99.95% Tungsten Fine Wire, 1Meter/Spool, Cleaned,Easy to Be Processed (0.6-0.9 mm),0.7mm/1m

  • Size: 0.6mm/1m,0.7mm/1m,0.8mm/1m,0.9mm/1m.
  • Microstructure, mechanical properties, molding ability, plasticity, good toughness and deformation, easy to be processed..
  • High temperature resistance 800-1250 degrees, anti-oxidation..
  • Acid and alkali resistant, used for transporting highly corrosive gases and liquids.
  • alkali resistance, seawater resistance and acid corrosion resistance..
Check Stock

IQQI 99.95% Tungsten Fine Wire 1Meter/Spool Cleaned,Easy to Be Processed 1.0-1.5 mm ,1.0mm/1m

  • Size: 1.0mm/1m,1.2mm/1m,1.3mm/1m,1.5mm/1m.
  • Microstructure, mechanical properties, molding ability, plasticity, good toughness and deformation, easy to be processed..
  • High temperature resistance 800-1250 degrees, anti-oxidation..
  • Acid and alkali resistant, used for transporting highly corrosive gases and liquids.
  • alkali resistance, seawater resistance and acid corrosion resistance..
Check Stock

IQQI 99.95% Tungsten Fine Wire,Length : 1M,Easy to Be Processed(0.01mm-1.5mm),0.01mm/1 Meter

  • Microstructure, mechanical properties, molding ability, plasticity, good toughness and deformation, easy to be processed..
  • High temperature resistance 800-1250 degrees, anti-oxidation..
  • Acid and alkali resistant, used for transporting highly corrosive gases and liquids.
  • alkali resistance, seawater resistance and acid corrosion resistance..
Check Stock

IQQI 99.95% Tungsten Fine Wire,Length : 1M,Easy to Be Processed(0.01mm-1.5mm),0.15mm/1 Meter

  • Microstructure, mechanical properties, molding ability, plasticity, good toughness and deformation, easy to be processed..
  • High temperature resistance 800-1250 degrees, anti-oxidation..
  • Acid and alkali resistant, used for transporting highly corrosive gases and liquids.
  • alkali resistance, seawater resistance and acid corrosion resistance..
Check Stock

IQQI 99.95% Tungsten Fine Wire,Length 1M,Easy to Be Processed 0.01mm-1.5mm ,0.13mm/1 Meter

  • Microstructure, mechanical properties, molding ability, plasticity, good toughness and deformation, easy to be processed..
  • High temperature resistance 800-1250 degrees, anti-oxidation..
  • Acid and alkali resistant, used for transporting highly corrosive gases and liquids.
  • alkali resistance, seawater resistance and acid corrosion resistance..
Check Stock