ReviewsGps Receiver For Raspberry Pi

DIYmall VK-172 VK 172 Gmouse G-Mouse USB GPS Dongle Glonass Support Windows 10/8/7/vista/XP/Raspberry PI Vehicle Aviation Tracker Pack of 1pc

  • Works with Windows,Andorid,Linux,Raspberry pi.Support Google Earth.It can not work with IOS system..
  • The default output is the product GPs protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data..
  • Note: This dongle only can work outdoor. If you want to let it work indoor, you need have GPS amplifier. Otherwise the GPS can not lock..
  • If you need some driver links and using videos for VK-172,Please contact us..
Check Stock

waveshare 4G/3G/GNSS HAT for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH and Jetson Nano,Based on SIM7600A-H,4G Communication GNSS Positioning,LTE-FDD B2/B4/B12 Brand Support LTE CAT4 up to 150Mbps

  • The SIM7600A-H 4G HAT (Based on SIM7600A-H) is a 4G communication and GNSS positioning module, Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards(compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B) and Jetson Nano. LTE-FDD B2/B4/B12 Brand,supports LTE CAT4 up to 150Mbps for downlink data transfer.This module is mainly applicable in North America (US,CA).
  • You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc..
  • Onboard USB interface, to test AT Commands, get GPS positioning data,etc.Onboard CP2102 USB to UART converter, for serial debugging.Onboard audio jack and audio decoder for making telephone call.Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper.
  • Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.Supports GPS, BeiDou, Glonass, LBS base station positioning.Supports SIM application toolkit: SAT Class 3, USAT..
Check Stock

KEYESTUDIO L298P Motor Driver HAT Shield GPIO for Raspberry Pi Model B/B+/A+/2/3/4 Zero and Zero W, High-Power Motor Speed Control Board Dual H Bridge with IR Receiver

  • This Motor Driver HAT gives your Raspberry Pi the ability to drive two DC motors, with drive current up to 2A..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards like Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions.
  • Reserved I2C SPI control pins, allows to work with other control boards and sensors. Comes with an IR receiver for communication with an infrared remote controller..
  • Included 4x M2.5*20MM screws, 4 xM2.5*10MM copper pillars, 4x M2.5 Nuts. Easy to install on your RPi board. Please note Raspberry Pi board, remote control and motors in the photos are Not Included!.
Check Stock

Ingcool 4G/3G/GNSS HAT Module for Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH,Jetson Nano, Based on SIM7600A-H, 4G/GNSS Module Support LTE CAT4 up to 150Mbps for Data Transfer, etc.

  • SIM7600A-H 4G HAT is a 4G/3G communication and GNSS positioning module, supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W/Zero WH series boards, Compatible with Jetson Nano, SIM7600A-H 4G module control pins can connect with host boards like Arduino/STM32.
  • Supports dial-up, telephone call, SMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning.
  • Connect the 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc..
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32).
Check Stock

Ingcool GSM/GPRS/GNSS Bluetooth HAT Expansion Board for Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero W/ Zero, Based on SIM868 Module Supports SMS, Phone Call, Global Position, Transfer Data, etc.

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc. Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning. Bluetooth 3.0, supports data transferring through Bluetooth.
  • SIM card slot for 1.8V/3V SIM card, Supports SIM application toolkit: GSM 11.14 Release 99.
  • Baudrate auto detection (1200bps ~115200bps). Onboard USB TO UART converter for UART debugging. 6x LEDs for indicating the module working status. RTC with backup battery holder.
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands). Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
Check Stock

Steam Controller

  • 【Wide Compatibly】 miadore 2.4G wireless game controller works with pc running windows xp/7/8/8.1/10, android 4.0 or above phone supporting otg and tablet. mac os x and beyond.
  • retro pi os. NOTE: it is third-party manufactured, not original SNES controller..
  • 【2.4GHZ Wireless Transmission】2.4G wireless transmission technology ensures stable connection and zero delay,offers a range up to 10 meters (32.8 feet). you can sit far away from the game console and enjoy playing without fearing data loss or signal interference..
  • 【Easy to Use】The wireless snes usb controller just plug and play, no need any driver on standard usb device.please press and hold the "start" button for 1s and re-press the start button, the led light start blinking constantly, then plug the usb receiver to your usb device, (enter into pairing mode) when first use on your device. reset : press “ select” +” start” + “down” buttons..
  • 【Rechargeable Gamepad】The cordless game controller builds in 500mah rechargeable lithium ion battery,connect with a usb charging cable when red-light start blinking constantly,the need replenishment 1 hour can be really full. it’s more environmentally friendly..
Check Stock

Seeed Studio ReSpeaker 4-Mic Array for Raspberry Pi, Raspberry Pi Microphone

  • ReSpeaker 4-Mic Array for Raspberry Pi(Pi 3/Pi 4 B +) is a 4 microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on..
  • Different from ReSpeaker 2-Mics Pi HAT, this board is developed based on AC108, a highly integrated quad-channel ADC with I2S/TDM output transition for high definition voice capture..
  • Besides, this 4-Mics version provides a super cool LED ring, which contains 12 APA102 programmable LEDs.With that 4 microphones and the LED ring, Raspberry Pi would have ability to do VAD(Voice Activity Detection), estimate DOA(Direction of Arrival) and show the direction via LED ring, just like Amazon Echo or Google Home..
  • This Raspberry Pi microphone support all Raspberry Pi models, including Raspberry Pi Zero, Raspberry Pi 1 B+, Pi 2 B, Pi 3 B, Pi 3 B+,Pi 4 B..
  • ReSpeaker 4-Mic array does not have audio output. If this is a requirement please consider the ReSpeaker 6-Mic Circular Array Kit For Raspberry Pi, the ReSpeaker 4-Mic Linear Array Kit for Raspberry Pi , or the ReSpeaker Mic Array v2.0..
Check Stock

AITRIP 2 pcs PCM5102 I2S IIS Lossless Digital Audio DAC Decoder Module Stereo DAC Digital-to-Analog Converter Voice Module Compatible with Arduino Raspberry Pi

  • The DAC Module provides a super affordable high-quality DAC Compatible with Raspberry Pi..
  • The stereo jack comes soldered onto the board already,Line out stereo jack,HAT format board..
  • Uses the PCM5102A DAC to Compatible with Raspberry Pi I2S interface.
  • Since it's digital audio,it sounds really good,much better than the onboard analog audio..
  • Applications: A / V Receiver DVD,BD player HDTV receiver Applications Require 2VRMS audio output.
Check Stock

Smraza Raspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply and 3 Heat Sinks for Raspberry Pi 3 Model B+ (B Plus), 3B, 2B

  • ✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board).
  • ✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components.
  • ✓ Easy to access all GPIO ports - Raspberry pi case with cutout to allow Pi's GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access.
  • ✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi's Wifi / Bluetooth Signal.
  • ✓5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi's power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply.
Check Stock

Raspberry Pi Expansion Board Raspberry Pi HiFi DAC+ HD Audio PCM5122 24 bit Expansion Board for Raspberry Pi 3 Model B / 2B /B+/A+/ Raspberry Pi Zero W

  • With DAC All function PCM5122 chip and I2S Input, X920 DAC+ board is a perfect HiFi / DAC+ / HIFI / Full HD audio expansion board for Raspberry Pi 3....
  • After using X920 board, User can coordinate with the broadcast system (such as Volumio, RuneAudio, OSMC, XMBC(Kodi), MOODE etc.) to set up your own....
  • X920 is available with RCA, 3.5mm phone jack output connectors and built in IR receiver (Vishay TSOP34838).
  • Full HD audio up to 24 bit/192kHz playback and Class leading audio (112db SNR, and 93db THD) function, Integrated hardware volume control with TI's....
  • Powered by Raspberry Pi, no external power requirements, Conforms to the Raspberry Pi hardware attached on top (HAT) specification..
Check Stock

Miuzei Raspberry Pi 4 Case with Fan Cooling Pi 4 Case with 4 Pcs Aluminum Heat Sinks Pi 4B Case for Raspberry Pi 4 Model B -Black/Blue (Pi 4 Board Not Included)

  • Raspberry Pi 4 Case for Raspberry Pi 4 - Miuzei clear blue acrylic raspberry pi 4b case is specially designed for raspberry pi 4 modle b / 4 b, and perfect compatible with raspberry pi 4 /4b. assembly easy for beginners and amateur..
  • Raspberry Pi 4 Case With Fan - New Raspberry pi 4b case with a Silence DC 5V cooling fan and 4 pcs Aluminum heatsinks, cooling system keep your Raspberry pi 4 B cool quickly even the CPU under high load..
  • Raspberry Pi 4 Model B Case - acrylic pi 4 case won’t block the signal.the rubber feet on the bottom lid can provide a stable platform for raspberry pi 4 case so that it allows air to circulate on the bottom side of the board and avoid the screws scratching the desk surface..
  • Easy To Access All Ports - Miuzei raspberry pi 4 case fan can perfect Access to the USB-C Power Connector, Dual Micro HDMI, Audio/Video, USB and Ethernet Ports, GPIO Port, Camera Cable, and Access to the Micro SD Card..
  • Packaging Content & After -Sales - you will receive pi 4 clear blue case, 4 piecess raspberry pi heatsink, 35mm cool fan, 4 piecess rubber feet, screwdrive, awesome looking, it can make your pi looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Check Stock