ReviewsGpu Mining

Mining Rig Case 8 GPU Mining Case with 8 Powerful Cooling Fans and Mining Motherboard (Without GPU, PSU) for ETH/ZEC GPU Mining Rig Cryptocurrency System Machine

【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports,and the GPU interface spacing is about 70mm. You can install 8pcs of GPUs on the motherboard at the same time. It’s compatible with a wide range of graphics cards..
【8 Powerful Cooling Fans】The mining rig case include 8 powerful cooling fans. More quite, accelerating the air convection,the design of one air volume in and one out with more space keep the graphics card running at high performance..
【Safe and Effective】The low power consumption, reduce heat generation, energy-saving, and safe use. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc..
【Mining rig case Including】 motherboard, CPU, power switch line, 4G RAM, 3000 rpm cooling fan * 4, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package..
【Tips】The GPU miner machine system doesn't come with GPU or PSU. You need to install your own power supply Hard drive, and GPU to work normally. Please feel free to contact us if you have any questions..

Check Stock

1800W Mining Power Supply Support 8 GPUs GPU Mining Rig for ETH Bitcoin Ethereum Miner with Auto-Thermally Controlled Fan Supply,Designed for US Voltage 110V

MINING MACHINE STRUCTURE - Mainboard: 24Pin*1,CPU: 8Pin*1,GPU: 6+2Pin * 16,SATA*8,IDE*6! It's better for Bitcoin GPU mining, Support Up to 8 GPU(GPU....
ENERGY SAVING - The power supply rated output power 1800W, With up to 93% conversion efficiency, high efficiency and energy saving, Using a new....
UNIQUE DESIGN - This 1800W mining power supply can be a perfect tool for your ETH Coin rig. DC circuit design, stable voltage output.This is a power....
SAFETY - Each product is rigorously tested before shipment , and has passed CE/FCC certification, and has a stable output voltage, providing multiple....
NOTICE - This power supply is special for mining machine, in order to effectively dissipate heat, the fan speed is above 2300 RPM, so the noise is....

Check Stock

DAYLEAD Mining Rig Case 8 GPU Mining Case with Mining Motherboard Support 8 Cooling Fans(4 Preinstalled) for BTC/ETH/ZEC GPU Mining Rig (Without GPU, PSU)

【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports, which means you can install 8pcs of GPUs on the motherboard at the same time. We have also tested the rig with various GPUs to ensure that it’s compatible with a wide range of graphics cards. Please note that only the same type of GPUs can be installed at the same time..
【8 Cooling Fans Supported】The mining rig case support 8 cooling fans. It is equipped with 4*120mm Silent cooling fans and 2* fan speed controller. More quite, accelerating the air convection, excellent heat dissipation performance, keep the graphics card running at high performance. Add 1*80mm CPU cooling fan..
【A stable machine】The 8 GPU mining rig frame is made of high-quality steel, strong, durable, and available for repeated addition, Easy to set up, It’s a stable machine that’s incredibly easy to set up and requires little maintenance, making it an ideal rig for mass scaling..
【Low Consumption】The consumption of the GPU mining rig system is less than 150watt. Supports Windows10/LINUX operation system..
【Kindly Note】New version of mining case MC03 suitable for most of the mining case power supplies on the market (1U, 2U, ATX). You need to purchase and install your own PSU, Hard drive, and GPU to wo....

Check Stock

MLLIQUEA 8 GPU Ports Mining Rig, Crypto Complete Mining Frame Machine with 2500W Mining Power Supply, Barebone B75 Motherboard for ETH with 8 Cooling Fans, Miner Frame Case with PSU, RAM, SSD

8 GPU Ports - The mining rig come with 8 GPU interfaces, the GPU interface spacing is 65mm. 8 GPUs can be installed on the motherboard at the same time. Compatible with AMD/NVIDIA GPUs..
2500W PSU - Our EHT miner is equipped with a 2500W professional Low Decibel mining power supply (176V to 264V), with ultra-high work efficiency, and is equipped with multiple power protections..
Complete Mining Rig- Include 2500W PSU, B75 MB, CPU G2030, 128G SSD, 4G RAM, eight 4500 rpm fans, 8 pin cables, and screws. Compatible with Windows or OS, but need to install the system yourself..
Upgrade Material - MLLIQUEA mining GPU frame case is made of high-quality steel, which is sturdy and durable. Can fully protect your GPU and electronic equipment from damage and saves your use cost..
Effective Heat Dissipation - Upgraded version of the 8 fans with adjustable speed (2500rpm-4500rpm). If you feel that the fan is very noisy at work, you can adjust the fan speed regulator to reduce the rotation speed and reduce the noise. Low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum, and any other cryptocurrency..
Excellent Customer Service - Please read the manual before use. If you are not completely satisfied with your purc....

Check Stock

Mining Rig Frame - 6 GPU, Steel Open Air Crypto Mining Frame Rig Case with Switch Cable & Gloves, Support Long & Short Size GPU, for ETH/ETC/ZEC/BTC/Bitcoin/Ethereum/Dogecoin (6GPU)

PROFESSIONAL MINING RIG FRAME: 6/8 GPU Mining Rig Frame, crypto mining frame for ETH/ETC/ZEC/BTC/DOGE. Used to protect GPU and electronic equipment, can keep all cables clean and organized, along with everything in your mining machine..
COMPATIBLE SUPPORT: The Crypto Mining Frame support 6~8 graphics cards, supports all standard ATX/BTX/FLEX/ITX/MicroATX motherboards, supports the largest motherboard size 305*245mm.
supports 1 ATX power supply(Supports up to 260mm length), supports 4*12CM fans, support 1 HDD+2 SSD installation positions..
EASY INSTALLATION: The Open Air Mining Frame has precise screw holes and easy installation. You can quickly complete the layout of the Mining Rig. Product size 19.7x11.2x8.9inch (50x28.5x22.5cm)..
RUGGED AND DURABLE: The mining rig case is made of thickened 1.0mm steel plate. It is durable that can use for many years. Fully Protecting Your GPU and Electronic Device. Open Air Mine Frame Design + 6 Graphics card spacing 81.28mm(8 Graphics card spacing 60.96mm) bring you the ultimate heat dissipation performance..
IMPROVEMENTS & UPGRADE: We learned that the first generation of products has the defect of weak support for short graphics cards. Now, we're rolling out our new Mining Rig Frame! The addition of the middle s....

Check Stock

SOONTECH Complete Mining Rig System for Ethereum Coin with Windows 10 Mining Motherboard Including CPU,SSD RAM,PSU Open-Pit Mining Machine,Frame Mining Machine EXCLUDING GPU/1 Layer Mining RIG

OUR FRAME MINING MACHINE DOES NOT CONTAIN GPU.This rack-mounted miner is made of the highest quality iron material and is durable. Fully protect your....
B85 frame type mining machine, professional design, accelerate air convection, super heat dissipation design. Sufficient space is reserved between the....
Please note: This product does not include GPU, install win10 mining system (The system is not activated), including 1800W, with power cord (both 110V....
B85 frame type mining machine, including: motherboard, Intel CPU 1840/1820 (with CPU cooler), 128GB SSD, 4G RAM,PSU,win10 system（The system is not....
GPU Port Gap: the port gap between GPUs is 65mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 60mm,....

Check Stock

8 GPU Mining Rig 68mm Slots, Crypto Ethereum Miner Frame with Barebone Motherboard for ETH/ZEC, Cryptocurrency Machine System Case with SSD/RAM (Without GPU/PSU)

【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
【4 Fans Support】 The mining rig case is equipped with 4pcs 3000rpm cooling fans, which can provide airflow allowing for assistive GPU cooling..
【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please feel free to contact me and we will provide you with technical support..
【Mining rig case package】 Including: motherboard, Intel CPU, 12....

Check Stock

8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD

【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please....

Check Stock

FebSmart GPU Riser for Ethereum Mining Rigs, PCIE Risers for ETH Mining Rigs, GPU Extension Cable, PCIE Extension Cable, PCIE X1 to PCIE X16 Riser, VER006C PCIE Riser, VER006C GPU Riser (Black-6PCS)

1. This FebSmart VER006C is a PCIE X1 to PCIE X16 GPU riser. The GPU riser will extend motherboard PCIE X1 slot out and covert PCIE X1 slot to PCIE X16 slot. The extended PCIE X16 slot will provide safe and reliable connection with GPUs. Light up more GPUs in Ethereum Mining rigs or other GPU Mining Rigs for currency mining..
2. This GPU riser will extend the motherboard PCIE X1 slot out and covert the PCIE X1 slot to PCIE X16 slot, users will have more room to place more PCIE X16 GPUs and cool down GPUs tamperature. Added fixed buckle on the extended PCIE X16 slot, will ensure GPUs always online, always works in high performance..
3. Designed with 3X solid capacitors, 1X voltage transformer and 1X inductance on GPU Riser, will make sure PCIE data signal get stable and reliable power supply. Built in electric safty fuse, will keep PCIE data signal away from overvoltage, overcurrent. Communicate with Ethereum mining pool instantly, Ensure Ethereum Miner Rigs get more Ethereum Hash Rate..
4. Packed with 23.6-inch USB 3.0 extension cable, will make sure GPUs flexible connection, easy to place GPUs in more room. Comes with 7.9-inch 15Pin SATA to 6Pin molex power cable, allow users easy pick-up basic PCIE data signal power supply from GPU Miner Rigs PSU..

Check Stock

FrSky Access 900MHz Long Range R9 Mini-OTA Receiver

1.GPU Currency Mining Risers: PCE-VER006C is a premium quality PCIE riser cables for Bitcion, Ethereum GPU Mnining Rigs..
2.Enough Power Supply: PCI Express Risers equipped with 20cm (11.81in) SATA to 6Pin power supply cable give GPUs sufficient power supply. Make sure....
3. Expand to PCIE X16: This PCIE riser will extend PCIE X1 from mother board to external PCIE X16 slot for air cool GPU Mining rigs..
4. Safety and Stable Risers: 3X solid capacitors,1X volatge transformer and 1X onductance inductance will prevent PCI Express Device over current,over....
5. Flexible GPU Connection:60cm/23.6in fully shielded USB 3.0 cable will extend PCIE signal out with little signal loss.Long enough extendsion cales....

Check Stock

PCIe Riser Powered Adapter Card 1X to 16X, PCI-E GPU Risers 8 Capacitors for Bitcoin Litecoin ETH Coin Mining with Led Graphics Extension +60cmUSB 3.0 Cable and 6-Pin SATA Power Cable (VER009s-6Pack)

... the PCI Express X16 slot ensure stable GPU connection. What's more, it can extend the mother board PCIE X1 slot to PCIE X16 slot and will provide more safer and reliable connectivity with more PCIE X16 graphic cards..
【Strong Stability for You】 The 009s gpu riser come with 24 inches USB 3.0 pcie extension cable mining.The PCI-E connector uses multi-layer shielded wire, which can be connected up to 300cm without signal attenuation. Equipped 15Pin SATA to Molex 6Pin power cable that can provide adequate current for Ethereum Mining rigs and GPU Mining rigs..
【8 Capacitors, More Safer】This high quality pcie riser splitter mining is equipped with 8 upgraded FP solid capacitors which make the graphics card power supply more safer and stable. It is excellent choice for mining rigs..
【Support System】: Compatible with all WINDOWS systems, LINUX, MAC.--Plug and play, no driver needed to install. (Bonus: 6*pcie riser adapter cards, 6*PCI-E 1x Golden Fingers , 6*60cm USB 3.0 cables, 6*6Pin to15Pin SATA power cables.）.
【Reliable Support】 Buy with 90 days warranty. PCI-Express GPU riser kits have been tested for functionality and durability by the third parties before sent it to you. If you have any questions, please feel free to contact us, we will....

Check Stock