ReviewsGpu Mining Motherboard 2

Mining Rig Frame 8 GPU 70mm Slots with 8 Fans Crypto Ethereum Miner Case with Barebone Motherboard for ETH/ZEC Cryptocurrency System Machine with SSD/RAM Without GPU/PSU

  • 【8 GPU Mining Rig Parameter】Inter1(R) Celeron B75 Motherboard: 8X PCI-E spacing 70MM.
  • 【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. The mining case support 8 PCS 3070/6800/6800XT 6900/6900XT GPUs....
  • 【8 Fans Support & Fan Controllers】 The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans....
  • 【4 USB Ports】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 4 USB ports,....
  • 【Mining rig case】The rig doesn't come with GPU and PSU. Including: motherboard, CPU, power switch line, 128GB SSD, 4G RAM, 2500-4500 rpm cooling....
Check Stock

SOONTECH Complete Mining Rig System for Ethereum Coin with Windows 10 Mining Motherboard Including CPU,SSD RAM,PSU Open-Pit Mining Machine,Frame Mining Machine EXCLUDING GPU/1 Layer Mining RIG

  • OUR FRAME MINING MACHINE DOES NOT CONTAIN GPU.This rack-mounted miner is made of the highest quality iron material and is durable. Fully protect your....
  • B85 frame type mining machine, professional design, accelerate air convection, super heat dissipation design. Sufficient space is reserved between the....
  • Please note: This product does not include GPU, install win10 mining system (The system is not activated), including 1800W, with power cord (both 110V....
  • B85 frame type mining machine, including: motherboard, Intel CPU 1840/1820 (with CPU cooler), 128GB SSD, 4G RAM,PSU,win10 system（The system is not....
  • GPU Port Gap: the port gap between GPUs is 65mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 60mm,....
Check Stock

FebSmart GPU Riser for Ethereum Mining Rigs, PCIE Risers for ETH Mining Rigs, GPU Extension Cable, PCIE Extension Cable, PCIE X1 to PCIE X16 Riser, VER006C PCIE Riser, VER006C GPU Riser (Black-6PCS)

  • 1. This FebSmart VER006C is a PCIE X1 to PCIE X16 GPU riser. The GPU riser will extend motherboard PCIE X1 slot out and covert PCIE X1 slot to PCIE X16 slot. The extended PCIE X16 slot will provide safe and reliable connection with GPUs. Light up more GPUs in Ethereum Mining rigs or other GPU Mining Rigs for currency mining..
  • 2. This GPU riser will extend the motherboard PCIE X1 slot out and covert the PCIE X1 slot to PCIE X16 slot, users will have more room to place more PCIE X16 GPUs and cool down GPUs tamperature. Added fixed buckle on the extended PCIE X16 slot, will ensure GPUs always online, always works in high performance..
  • 3. Designed with 3X solid capacitors, 1X voltage transformer and 1X inductance on GPU Riser, will make sure PCIE data signal get stable and reliable power supply. Built in electric safty fuse, will keep PCIE data signal away from overvoltage, overcurrent. Communicate with Ethereum mining pool instantly, Ensure Ethereum Miner Rigs get more Ethereum Hash Rate..
  • 4. Packed with 23.6-inch USB 3.0 extension cable, will make sure GPUs flexible connection, easy to place GPUs in more room. Comes with 7.9-inch 15Pin SATA to 6Pin molex power cable, allow users easy pick-up basic PCIE data signal power supply from GPU Miner Rigs PSU..
Check Stock

Fanhasi 8 GPU Mining Rig Frame Case for ETH Crypto Miner with 8 GPU Mining Motherboard & 2000W Power Supply & 128GB SSD & 4G RAM & 8 Cooling Fans (Without GPU)

  • Case Type Mining Machine: The Ethereum miner case is made of high quality steel material which is sturdy and durable, can fully protect your GPU and electronic devices from damage. NOTE: GPU cards which are longer than 12.6 inch / 32cm in length are UNAVAILABLE for this mining rig..
  • Mining Rig Including: B75 motherboard, 2000W Supply Power (110V - 264V input ), CPU, 128GB mSATA SSD, 4G DDR3, 8 PCS 4500 RPM cooling fans. (NOTE: GPU cards are NOT Including； Windows is not atctivated.) If you have any questions or the goods received are damaged, please feel free to contact us..
Check Stock

SENKAUTO Mining Rig Case 8 Ports GPU Mining Frame Case Mining Motherboard 8 Cooling Fans Supported(4 Preinstalled) Mining Machine System with 4GB RMA, CPU (Without GPU/PSU) (Black)

  • Support 8pcs GPUs: The mining rig case support 8 GPUs. Support ATX motherboard, built-in, external dual PSU hosting, PSU mounting, hard drive. 8 GPUs can be installed at the same time, which greatly improve the performance of the BTC/ETH/ETC mining machine case..
  • Generous Space between GPUs: The Gap between GPU ports is about 65mm, it can ensure high performance, low power consumption for mining..
  • Support 8 Cooling Fans: The mining rig case support 8 cooling fans and preinstalled with 4* 2500rpm cooling fan. 2* fan speed controller, you could adjust the fan speed according to your need. Great heat dissipation is a must for mining Bitcoin (BTC), Ethereum (ETC), and any other cryptocurrency..
  • Support ATX/1U/2U Power Supply: The mining rig frame made of highest quality steel, with the finest craftmanship, which is easy to install and has a sturdy structure. With a larger room for power supply, you can install standard ATX PSU directly without modifications. Keeps the machine perfectly organized while it holds the least amount of heat possible..
  • Mining rig case package: Including: motherboard, CPU, power switch line, 4G RAM, 2500rpm cooling fan * 4, fan speed controller*2, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't in....
Check Stock

IIAzimps PCI-E Riser Card 010S 8 Solid Capacitors GPU Risers Adapter Card PCI-Express 1X to 16X Riser Card for Bitcoin Ethereum Mining BTC ETH Miner Rig (3 Pcs Pack)

  • Upgraded Version: The 010S PCI-E risers card is the newer upgraded version of the GPU risers 009S, expand the motherboard PCIE 1X to PCIE 16X slot, use gold plated contacts to ensure flawless connectivity and long life. Mainly designed for Bitcoin Ethereum Crypto Mining rigs and other GPU mining equipment..
  • More Stable and Secure: The graphics card power supply adopts 8 solid capacitors to ensure the graphics card mining stably and secure..
  • Multi-interface Design: 4PIN+6PIN interface design, With SATA 15pin Male to 4pin/6pin power cable, makes the graphics card power independent of the motherboard to reduce the burden on the motherboard when connecting multiple graphics cards..
  • Thoughtful Design: The PCI-E USB 3.0 cable uses multi-layer shielded wire, which can be connected to a maximum of 3M without attenuating the signal. 6 marquee LED lights display working status. The graphics card slot is metal shielded to prevent interference and with a fastening buckle, which provide a firmly connect..
  • Wide Compatibility: This GPU riser kit is compatible with 1x, 4x, 8x, 16x PCI-E slot of th....
Check Stock

SUOHUI Ethereum Mining Rig Complete Mining Case for ETH/ETC Crypto Mining Prebuilt 8 GPU Mining Motherboard 1800W PSU 110v-220v 8 Cooling Fans 8GB RAM SSD CPU Excluding GPUs -Blue

  • ◀ Complete Installation, Start in Minutes： This GPU miner has installed high-quality mining hardware (without GPU) and Win10 English version....
  • ◀ Ultra-quiet Mining Power Supply: Built-in 4U 1800W full-voltage power supply, 110V-220V universal output to meet the use of different voltage....
  • ◀ 8 Controllable Cooling Fans: With each 4 cooling fans installed on the front and rear, the mining case fully allows the cold air in and hot air....
  • ◀ High-quality Mining Sever Case: The mining rig adapted sturdy and durable steel material to protect the GPU and electronic accessories. High....
  • ◀ SUOHUI complete mining rig case comes with an 8GPU mining motherboard, 1800W PSU, 8GB RAM, 128GB SSD, CPU (with the cooling system), 4USB ports,....
Check Stock

MANMEI Open Air 8 GPU Mining Rig Frame for Crypto Miner Stackable Ethereum Mining Machine 1800W Power Supply 110V-264V 8 GPU Motherboard with CPU & 128GB SSD & 8G RAM & 4 Fans Without GPU

  • Mining Rig Complete System: MANMEI mining rig is designed for crypto mining – Ethereum Classic, ETH, Litecoin, Dogecoin, Monero, Zerocoin, Ripple....
  • 110 - 264V Voltage Power Supply: Built-in 1800W PSU is specially designed for mining rig with up to 90% conversion efficiency. Wide voltage range....
  • 8 GPU Ports Mining Motherboard: Specially designed B85 mining motherboard allows you to put at most 8 Pcs graphics cards in the mining rig at same....
  • Easy & Quick Installation: With prebuild design, MANMEI B85 frame type mining machine is easy and quick to assemble. Compared with other mining rig....
  • Mining Rig System Including: B85 motherboard with CPU, 1800W Supply Power (110V - 264V input ), 128GB SSD, 8G DDR3 RAM, 4 PCS 4500 RPM Adjustable....
Check Stock

DAYLEAD Mining Rig Case 8 GPU Mining Case with Mining Motherboard Support 8 Cooling Fans(4 Preinstalled) for BTC/ETH/ZEC GPU Mining Rig (Without GPU, PSU)

  • 【8-Port Ming Rig Frame】The mining rig frame has 8 GPU ports, which means you can install 8pcs of GPUs on the motherboard at the same time. We have also tested the rig with various GPUs to ensure that it’s compatible with a wide range of graphics cards. Please note that only the same type of GPUs can be installed at the same time..
  • 【8 Cooling Fans Supported】The mining rig case support 8 cooling fans. It is equipped with 4*120mm Silent cooling fans and 2* fan speed controller. More quite, accelerating the air convection, excellent heat dissipation performance, keep the graphics card running at high performance. Add 1*80mm CPU cooling fan..
  • 【A stable machine】The 8 GPU mining rig frame is made of high-quality steel, strong, durable, and available for repeated addition, Easy to set up, It’s a stable machine that’s incredibly easy to set up and requires little maintenance, making it an ideal rig for mass scaling..
  • 【Low Consumption】The consumption of the GPU mining rig system is less than 150watt. Supports Windows10/LINUX operation system..
  • 【Kindly Note】New version of mining case MC03 suitable for most of the mining case power supplies on the market (1U, 2U, ATX). You need to purchase and install your own PSU, Hard drive, and GPU to wo....
Check Stock

SHANGZHAOYUAN B250 BTC-12P Mining Motherboard (Intel 6th/7th Gen) LGA 1151 Motherboard with 12 PCIe Slots, VGA+DVI, MSATA, 2*DDR4, USB 3.0 for Miner (BTC/ETH/ZEC/ETC)

  • 【Superb Configuration】The Intel LGA1151 6th/7th Motherboard using Intel B250 high-speed chipset, and has stabilized capacitors that can provide a stable voltage for your electrical equipment.
  • ⚡【High Performance】The Mining motherboard 12 GPU is equipped with 2 DDR4 2133/2400/2800/3000 MHZ memory slots, up to 32GB maximum capacity. Support LGA 1151 series 6th/7th generation processors.
  • 【Mine Motherboard】Up to 12 GPUs can be connected via 12 PCI-E interfaces, maximizing your mining connectivity and speed. The B250C BTC Motherboard allows you to fire up your mining efforts.
  • ⚡【High efficiency】Fast startup, loading and file transfer. Effectively reduce interface interference and line loss to ensure data reliability, thus improving efficiency..
  • 【Exclusive for Mining】Quiet, low power consumption, low heat generation, energy-saving, safe and reliable, effectively helping to mine Bitcoin (BTC), Ether (ETC) and any other cryptocurrencies.
Check Stock

Mining Rig Frame - 6 GPU, Steel Open Air Crypto Mining Frame Rig Case with Switch Cable & Gloves, Support Long & Short Size GPU, for ETH/ETC/ZEC/BTC/Bitcoin/Ethereum/Dogecoin (6GPU)

  • ...Mining Rig Frame, crypto mining frame for ETH/ETC/ZEC/BTC/DOGE. Used to protect GPU and electronic equipment, can keep all cables clean and organized, along with everything in your mining machine..
  • COMPATIBLE SUPPORT: The Crypto Mining Frame support 6~8 graphics cards, supports all standard ATX/BTX/FLEX/ITX/MicroATX motherboards, supports the largest motherboard size 305*245mm.
  • supports 1 ATX power supply(Supports up to 260mm length), supports 4*12CM fans, support 1 HDD+2 SSD installation positions..
  • EASY INSTALLATION: The Open Air Mining Frame has precise screw holes and easy installation. You can quickly complete the layout of the Mining Rig. Product size 19.7x11.2x8.9inch (50x28.5x22.5cm)..
  • RUGGED AND DURABLE: The mining rig case is made of thickened 1.0mm steel plate. It is durable that can use for many years. Fully Protecting Your GPU and Electronic Device. Open Air Mine Frame Design + 6 Graphics card spacing 81.28mm(8 Graphics card spacing 60.96mm) bring you the ultimate heat dissipation performance..
  • IMPROVEMENTS & UPGRADE: We learned that the first generation of products has the defect of weak support for short graphics cards. Now, we're rolling out our new Mining Rig Frame! The addition of the middle support column not only provides better ....
Check Stock