ReviewsGpu Riser Cable

AsiaHorse New PCIE 3.0 16x High Speed Flexible Extender Riser Cable Card Extension Port Adapter 200mm(90 Degree Angle Black)

  • FULL-SPEED PCI-E 3.0 x16 128Gbp/s BANDWIDTH: AsiaHorse pcie 3.0 riser cable will deliver all the performance of PCIe 3.0 to your GPU, supporting PCI 3.0/2.0/1.0 applications. Doesn’t Support PCIE4.0..
  • EMI SHIELDED DESIGN: The pcie riser cable utilizes the latest materials for EMI shielding, allowing each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emissions of electromagnetic frequencies, minimize disturbance and degradation on performance..
  • EXTENDED AND ANGLE: With 25cm of cable length and a 180° female PCIe connector, making this pcie extender minimizes cable stress and easily install your GPU in compatible cases..
  • COMPATIBILITY: Flexible and extended PCI-Express slot with 1x/4x/8x/16x compatibility. Support GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RTX3080,RTX3090, RX570, RX580, GTX680, GTX670 GTX760 etc..
  • NOTICE: The transmission speed depends on the motherboard and graphics card speed is consistent. For example: PCI-E graphics card is 2.0, the motherboard PCI-E 16X is 3.0, then the actual transmission speed is 2.0, and vice versa..
Check Stock

PCIE Riser Cable VER006C,GPU Risers for Mining Rigs,GPU Extension Cable,GPU Crypto Currency Mining Cable with 6Pin-SATA Power Cable and 23.6in Extension Cable,Extend PCIE X1 to PCIE X16(PCE-VER006C)

  • 1.GPU Currency Mining Risers: PCE-VER006C is a premium quality PCIE riser cables for Bitcion, Ethereum GPU Mnining Rigs..
  • 2.Enough Power Supply: PCI Express Risers equipped with 20cm (11.81in) SATA to 6Pin power supply cable give GPUs sufficient power supply. Make sure GPUs works in high performance all the time..
  • 3. Expand to PCIE X16: This PCIE riser will extend PCIE X1 from mother board to external PCIE X16 slot for air cool GPU Mining rigs..
  • 4. Safety and Stable Risers: 3X solid capacitors,1X volatge transformer and 1X onductance inductance will prevent PCI Express Device over current,over voltage and over heat..
  • 5. Flexible GPU Connection:60cm/23.6in fully shielded USB 3.0 cable will extend PCIE signal out with little signal loss.Long enough extendsion cales will let user easy to place GPUs..
Check Stock

Dracaena 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin/ MOLEX/SATA Powered) LED Status Riser Adapter + 60cm USB 3.0 Cable (GPU Ethereum Mining)

  • Upgraded Version: The Dracaena PCIE Riser is a high-performance PCI Express riser that can convert a PCIE X1 slot to a PCIE X16 slot on the mother board. With more PCIE X16 graphic cards, it will give a safe and dependable connection. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
  • Stable solution: The 60cm USB 3.0 extension cable is soft and flexible, making it simple to position and route. The operating state is shown by three LED lights. The slot has a fixed buckle that makes it easy to remove and replace the graphics card without it falling out..
  • Simple extend PCI Express X1 slot from mother board to PCI Express X16 slot for heavy GPUs. Added fixed buckle on the PCI Express X16 slot ensure stable GPU connection..
  • Power Supply Options: While other PCIE has only 1 option for power connector which is 6 pin power connector. Dracaena Riser provides 3 different options which are 6pin, Molex and SATA.
  • 3 Solid Capacitors improve power stability to GPU and prevent interference. Coil unit added for absorbing electromagnetic wave.
Check Stock

PCIe Riser Card Latest Adapter 6-Pin 1x to 16x For Mining GPU Riser Adapter Flexibility Extension Cable 6-Pin PCI-E to SATA Power Cable For Bitcoin & Crypto Mining Ethereum Mining ETH

  • ✅ HIGH QUALITY - Get the best quality out of your mining rig. This top-of-the-line solution for setting up crypto mining rigs. This express usb 3 riser kit supports multi gpu.
  • ✅STABILITY - 4 High performance capacitors and one stabilivolt to make the power delivery more stable, giving your gpu the support it needs to run efficiently.
  • ✅LONG SIFESPAN - With the use of gold plated contactors, this makes it ensure durability and flawless connectivity. Sata to usb cable bitcoin miner and altcoin mining.
  • ✅COMPATIBILITY - This riser kit is compatible with 1x, 4x, and 8x, 16x PCI-E slot of the motherboard, dedicated for alt coin mining. Compatible with wide range of GPU.
  • ✅CUSTOMER SUPPORT - We guarantee your satisfaction or your money back. If there are ever any issues with your expectations of this product please reach out to us directly and we will be sure to fix any concerns you may have.
Check Stock

NZXT H710i - CA-H710 i-W1 - ATX Mid Tower PC Gaming Case - Front I/O USB Type-C Port - Quick-Release Tempered Glass Side Panel - Vertical GPU Mount - Integrated RGB Lighting - White/Black

  • NEW FEATURES: Front I/O USB Type-C Port, Vertical GPU Mount, Tempered glass side panel with single screw installation, and upgraded Smart Device V2.
  • SMART DEVICE V2: Includes a faster microprocessor for NZXT CAM-powered control of two RGB lighting channels and three fan channels that support either....
  • VERTICAL GPU MOUNTING: Show off your graphic card with a built-in mounting bracket for installing your GPU vertically *PCIe riser card not included.
  • ENHANCED CABLE MANAGEMENT: Our patented cable routing kit with pre-installed channels and straps makes wiring easy and intuitive.
  • SPECS: Max GPU Clearance: 413mm, Radiaor Support - Front: 360mm, Top: 360mm, Rear: 140mm.
Check Stock

N N.ORANIE 6 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin / MOLEX/SATA) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card and 60cm USB 3.0 Cable

  • 【PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X】 The N N.ORANIE PCIE Riser is a high-performance PCI Express riser that can convert a PCIE X1 slot to a PCIE X16 slot on the mother board. With more PCIE X16 graphic cards, it will give a safe and dependable connection. Will be mainly used on Ethereum Mining rigs or GPU Mining rigs..
  • 【STABLE and SAFE】Features 4 high quality black solid capacitors to make the power deliver from graphics card more secure and stable. Build in electric circuit protector keep device away from over current, over heat and over voltage. WARNNING: If the PCIE X1 Connector Inserted Reversely, May Damage the Connected GPUs or PCIE Slots..
  • 【3 POWER SUPPLY METHODS】3 power supply methods are used: SATA power interface, 6Pin power interface, and 4-pin interface power supply.Multiple power supply methods solve the problem of power mismatch. Reduces the power supply burden on the motherboard and can be freely selected according to the actual usage environment.(Please reserve 10W power supply for riser when configuring power supply).
  • 【REDUCE MOTHERBOARD BURDEN】6-PIN PCI-E power to 15-PIN SATA power cable for direct connection to your power supply reduces the power burden on your motherboard and ensures maximum compat....
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- White

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
Check Stock

Mailiya 009s Pro PCIe Riser Dual Chip PCI-Express GPU Riser,16X to 1X Powered Riser Adapter Card w/10 Solid Capacitors/RGB LED Light/60cm USB 3.0 Cable

  • Mailiya 009s Pro PCIE RISER, newest and top of the line solution for setting up GPU mining rigs, with upgrade integrated inductor makes the pcie....
  • 10X high quality capacitors GPU RISER, the most capacitors riser card on market, more capacitors results in less electrical fluctuations, meaning more....
  • Unique 7-color alternate LED light, monitors the status of the powered pci riser any time, double protects your gpu and secures your investment. You....
  • Multiple power supply options, PCIe 6pin, Molex, SATA15pin, which provides graphic card independent power and reduces motherboard burden when using....
  • Upgraded 1x adapter to prevent putting it in backwards so miners will not accidentally damaged by putting backwards! Plug and play, no driver needed....
Check Stock

PCIE Riser Card 8 Capacitors,GPU Extender Riser Card for Bitcoin Litecoin ETH Ethereum Mining,with 60 cm USB 3.0 Extension Cable & 6PIN SATA Power Cable (V009s-PLUS,6 Pack)

  • ✅【PCIE Riser Card】The motherboard PCIE X1 slot can be expanded into a PCIE X16 slot, which will provide a safe and reliable connection for more graphics cards..
  • ✅【8 solid capacitors】The PCIE riser adopts 8 solid capacitors to make the power supply of the graphics card more secure and stable. Equipped with a 15Pin SATA to Molex 6Pin power cable for enhanced power supply..
  • ✅【Reduce the burden】The GPU riser makes the power supply of the graphics card independent of the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected..
  • ✅【Strong stability】The PCIE riser uses a 60cm USB 3.0 cable, which can be easily placed and wired, with multi-layer shielded wire, the signal will not be weakened within 3 meters, and mining is more stable..
  • ✅【Support system】Compatible with MAC, LINUX and WINDOWS systems, no need to install drivers, plug and play. If you have any questions about the product, please contact us..
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Vertical GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- White

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Vertical GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
Check Stock