ReviewsGpus For Mining Ravencoin

2000W Mining 2U Single Channel Power Supply, 110-230V Ethereum PSU for 8 GPU ETH Miner Rig Case

【2000-2500W Mining Power Supply】 The mining power supply is mainly designed for cryptocurrency mining. The power supply has ten 6 pin power leads. Note: The power supply cannot be used for ASIC miners with protocols or software..
【Single channel PSU parameters】 The miner PSU can be used in 110V-230V. Input AC110V output rated power is 2000W. Input AC220V, the output rated power is 2500W. Power efficiency is 80% at 110V, Power efficiency is 90% at 220V. Please reasonably calculate the consumption of the GPUs, and reserve 300-400W for the motherboard and other cable consumption..
【Support 6-8 GPU graphics card】 Built in 60mm diameter cooling fan, with speed up to 12000 rpm, Which is conducive to heat dissipation. But the sound will be loud decibel: about 65-69 DB at no load. Support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPUs simultaneously. We recommend running 6 cards of 3080/3090 without overclocking the GPU..
【Package】 Include 1.2m power cord, cable tie, screw. Over voltage protection, overloading protection, short circuit protection..

Check Stock

8 GPU Mining Rig Frame with Mining Motherboard/SSD/RAM/CPU/Cooling 4 Fans ,Crypto Ethereum Mining Rig Case 8 GPU Slots for Cryptocurrency Bitcoin/Crypto ETH Miner (Without GPU and PSU)

【Mining Rig Frame 】:It is specially designed for cryptocurrency mining (Monero/Ethereum/Ripple/Zerocoin/other)，with 8 GPU slots (but without GPU), has 4 USB ports and 1 VGA ports.Support single power supply(Two cables of the power supply are connected to the motherboard, and the remaining eight cables are connected to the GPU. The power supply can directly supply power to the GPU, and there is no need to supply power to the GPU from the motherboard. ).
【8 GPU -16X Slots】: 8* Pcie 3.0 slots on mining motherboard.The spacing between each GPU slot is 65mm (about 2.56in)，gives the GPU enough space for air circulation and prevents the GPU from overheating.The size of case fits most video cards.(Except 3060,because 3060 GPU need dedicated motherboard)..
【Upgrade Material】：Our mining GPU frame case is made of high-quality steel, the surface is flat and smooth, and the internal space is large. The internal motherboard design is great, the overall size of the chassis is 27.55in*15.75in*6.69in..
【ETH Mining rig case Including】:motherboard, Intel CPU (with CPU cooling plate*1), power cord, 128GB mSATA SSD, 4G DDR 3, 5200 rpm cooling fan * 4, 8*(6+2)Pin graphics power cable (motherboard and fan power,all cables are 12V),screws*12, power switch....

Check Stock

PXY-ELEC Complete Mining rig System. BTC-X79-5 Mining Motherboard 5 PCI-E 3.0 Graphics Card Slots, Including CPU, SSD,(8G) RAM, PSU, Support 3060GPU Full Speed ETH Miner (Without GPU 8G RAM)

BTC-X79-5 card mining machine is optimized for 3060 LHR v1, and the single card computing power of 3060 graphics card is as high as 48MH/s or more. The noise during operation is around 55db. It runs very quiet, very suitable for home use ，X79-5 card mining machine motherboardsupports RTX3060TI, 3070 3080, 3090, 6800/6800XT, 6900/6900XT and other graphics cards.
This is a complete set of miners (note no GPU), it already contains: x79 motherboard, intel 2609 v2 CPU, 8GB RAM, 128GB SSD, 1800w power supply, 6 PIN cable to (6+8) Pin*5pcs, 3 Fan, metal frame. Lifting kit, only need to prepare graphics card, monitor, mouse, keyboard to run..
X79-5 card mining machine main board adopts H61 chip, single-channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. Note the width of the graphics card. When using hiveos to start, enter the BIOS to set the U disk to start, wait 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
If you want to use other CPUs, please use CPUs below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2, etc. You can also install additional layers, each miner is equipped with parts.

Check Stock

Crypto Miner Sci-Fi Futuristic T-Shirt

Are you a cryptocurrency miner? this awesome unique and futuristic. Or get it as a gift for that friend who is a crypto maniac and has a gigantic rig of gpus mining some altcoins who would love this! bitcoin, ethereum, litecoin, altcoin miner..
Make sure you get the perfect size for you to keep mining with this Crypto Miner clothing. Wear while day trading BTC, ETH and LTC. You'll be has hot has your gpu rigs. Keep mining altcoins and make blockchain safer..
Lightweight, Classic fit, Double-needle sleeve and bottom hem.

Check Stock

PXY-ELEC Complete 8GPU Mining rig System. B85 Full Mining Machine Includes Mining Motherboard ,CPU,(256) SSD,(8) RAM and PSU.Used for Build GPU Frame Mining rig ETH Miner(Without GPU)

B85 miner is a standalone mining system that supports AMD/NVDIA GPUs . Including: mining machine motherboard, Intel CPU 1840/1820 (with CPU cooler), SSD (256GB), RAM (8G), PSU (1800w), 4 fans (silent), single metal frame, only need to prepare graphics card and monitor , mouse, keyboard run.
B85 rack-mounted mining machine, professional silent design, accelerated air convection, excellent heat dissipation design. Noise: 26.65 (dB-A) or lower, [1800w silent power supply]: The power input voltage is AV 110-230V, and the power conversion efficiency is as high as 92%, allowing you to enjoy the fun of electricity while mining..
The B85 rack-mounted miner is made of steel and iron, and the length of the graphics card is not limited. If you have purchased multiple miners of the same model, the B85 can be equipped with an additional layer (with support columns).more space-saving and organized. It is recommended not to exceed 4 layers.
The GPU interface spacing is about 65mm, enough spacing to ensure good heat dissipation is a necessary condition for mining any cryptocurrency such as Bitcoin (BTC) and Ethereum (ETC), but also please note that the width of your GPU should not exceed 65MM, otherwise Cannot install 8 GPUs.
B85 miner 128GB SSD pre-installed with Windo....

Check Stock

PCIE Riser Cable VER006C,GPU Risers for Mining Rigs,GPU Extension Cable,GPU Crypto Currency Mining Cable with 6Pin-SATA Power Cable and 23.6in Extension Cable,Extend PCIE X1 to PCIE X16(PCE-VER006C)

1.GPU Currency Mining Risers: PCE-VER006C is a premium quality PCIE riser cables for Bitcion, Ethereum GPU Mnining Rigs..
2.Enough Power Supply: PCI Express Risers equipped with 20cm (11.81in) SATA to 6Pin power supply cable give GPUs sufficient power supply. Make sure GPUs works in high performance all the time..
3. Expand to PCIE X16: This PCIE riser will extend PCIE X1 from mother board to external PCIE X16 slot for air cool GPU Mining rigs..
4. Safety and Stable Risers: 3X solid capacitors,1X volatge transformer and 1X onductance inductance will prevent PCI Express Device over current,over voltage and over heat..
5. Flexible GPU Connection:60cm/23.6in fully shielded USB 3.0 cable will extend PCIE signal out with little signal loss.Long enough extendsion cales will let user easy to place GPUs..

Check Stock

SUOHUI Complete GPU Mining Rig for Ethereum Classic ETC/ETH/RVN/Flux/Rego with 8 GPU Mining Motherboard,PSU,RAM, SSD, Open Frame Mining Machanie(ExcludingGPU/1 Layer Miner)

【Preinstalled Mining hardware】Miner comes with a mining motherboard, PSU, cooling fans, 128GB SSD, 8GB RAM, CPU, and Win10 OS(not activated). Our mining rig has a complete installation that all components have passed the inspection of technicians and assembled before sending out, which can reduce the defective rate of electronic components and improve the product quality. Easy start in minutes! Note: NOT include GPUs..
【Professional Mining Power Supply】 1800W full voltage power supply allows to mine at home easily. The 10 customized long-line power cables directly power mobo and each graphics card without an adapter cable, avoiding burning the card due to poor contact, providing the best security for your mining..
【4*4500 RPM Silent Cooling Fans】The mining machine has 4 powerful GPU cooling fans with a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. Equipped with the bottom plate to prevent turbulent airflow and achieve excellent efficient heat dissipation..
【Stackable Open-air Mining Frame】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being over shaped. The open-air frame ensures that the graphics card is not limited i....

Check Stock

8 GPU Mining Rig 70mm Slots with 2500W Power Supply 8 Fans Crypto Coin Miner Case with Barebone Motherboard for Ethereum Cryptocurrency Mining Frame with SSD/RAM Without GPU

【Built in 2500W Power Supply】 Built in 2500W power supply with 10 PCS long power cables. No need to purchase adapter cables, connect to....
【8 GPUs Support】8 GPU 70mm expansion slots in the mining computer case. For our power supply, the power efficiency is 90%, the rated power is....
【8 Fans Support & Fan Controller 】The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans....
【 HDMI & VGA Ports】There are HDMI port and VGA port, you can use HDMI cable or VGA cable. It is designed for cryptocurrency mining—Litecoin,....
【Mining rig package】 Note: Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU/PSU from overheating.....

Check Stock

SOONTECH Complete Mining Rig, Crypto Mining Rig Frame for Ethereum, 8 Gpu System Mining Rig, Including Motherboard, CPU, SSD, RAM, PSU(without GPU)

Please note: This product includes HP Power 750W (model: HP DPS-750RB A), with a power cord (110V and 220V can be used) when running without noise, very quiet. Does not include GPU and fan. win10 system (not activated, please do not buy if you mind).
Eth mining rig, including: motherboard, Intel CPU (with CPU cooler), 128GB SSD, 4G RAM,PSU,Breakout Board ,6 PIN cable to (6 + 8) Pin * 17pcs, ,win10 system. installation instructions。.
Two HP Power 750W (MODEL: HP DPS-750RB A) can be used at the same time, please contact customer service for purchase..
GPU Port Gap: the port gap between GPUs is 55mm, you can put 8pcs GPUs on the motherboard at the same time if your GPU thickness is less than 50mm, otherwise you will just put only less than 4pcs GPUs on the motherboard at the same time..
Note: If you have any questions, please contact us. We will solve your problem in time..

Check Stock

FrSky Access 900MHz Long Range R9 Mini-OTA Receiver

1.GPU Currency Mining Risers: PCE-VER006C is a premium quality PCIE riser cables for Bitcion, Ethereum GPU Mnining Rigs..
2.Enough Power Supply: PCI Express Risers equipped with 20cm (11.81in) SATA to 6Pin power supply cable give GPUs sufficient power supply. Make sure....
3. Expand to PCIE X16: This PCIE riser will extend PCIE X1 from mother board to external PCIE X16 slot for air cool GPU Mining rigs..
4. Safety and Stable Risers: 3X solid capacitors,1X volatge transformer and 1X onductance inductance will prevent PCI Express Device over current,over....
5. Flexible GPU Connection:60cm/23.6in fully shielded USB 3.0 cable will extend PCIE signal out with little signal loss.Long enough extendsion cales....

Check Stock

HUAXUCHENG BTC-X79-5 Card Mining Machine Motherboard, 5 PCI-E 3.0 Graphics Slot with 4GB ddr3 128GB MSATA, Support 3060 GPU Mining Rig (Mining rig(8GB RAM))

❤ Please note: The X79-5 card miner does not contain GPU and does not contain GPU. Does not include GPU. X79-5 card mining machine includes: Intel CPU, 128GB SSD, 8G RAM, 1800W power supply (super static power supply), fan (silent fan), rack, graphics card, screw bag, Fan speed control,,win10 system (inactive), installation video. (BTC-X79-5 card mining machine supports Win10, Linux, hiveos (spark), nicehash, minero (os) and other operating systems.) Provide professional technical support.
❤ 3060 graphics card single-card computing power is as high as 48MH/s or more, which perfectly supports graphics card mining ETH, greatly improving the computing power mining function. BTC-X79-5 card mining machine motherboard, supports RTX3060TI, 3070 3080, 3090, 6800/6800XT, 6900/6900XT and other graphics cards..
❤ X79-5 card mining machine motherboard adopts H61 chip, single-channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. When using hiveos to start, enter the BIOS to set the U disk to start, wait for 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
❤ Specially designed for cryptocurrency mining - Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin a....

Check Stock