ReviewsGraphics Card Heatsinks

PCI-E Riser for BTC,LTC,ETH,Mining Dedicated Graphics Card Extension,1X to 16X,4pcs FP Solid capacitors,Maximum 16A Power Supply Capacity,3 LED,Gold-Plated USB 3.0 Cable(VER009S-2 PCS)

  • This model uses self-recovery insurance for graphics card power protection, using high-quality integrated inductors and graphics card solid capacitors, and the power conversion efficiency can reach up to 95%. The extension cord graphics card 6P interface (maximum 16A power supply capacity) strengthens the power supply, and completely solves the problem of insufficient power supply capacity and burning of the power cord..
  • The graphics card power supply uses 4 FP solid capacitors to make the graphics card power supply more stable and safe. The adapter card has a fixed pin 6PIN interface to strengthen the power supply, and it can be converted to a SATA port with a SATA to 6PIN line, so that the power supply of the graphics card is independent from the motherboard, thereby reducing the burden on the motherboard when multiple graphics cards are connected..
  • The graphics card slot adopts imported connectors to make the graphics card better contact. The PCI-E connector uses a multi-layer shielded cable, which can be connected to a signal up to 3M without attenuating the signal. The wires are relatively soft and easy to route..
  • The PCI-E connector plug is fully gold-plated, which is more wear-resistant and increases electrical conductivity. The slot is equipped ....
Check Stock

Micro Center Inter Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unlocked LGA1700 Desktop Processor with ASUS ROG Strix Z690-A Gaming WiFi D4 Motherboard

  • Intel Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unlocked LGA1700 600 Series Chipset 125W,30MB L3 Cache,14MB L2 Cache,Intel UHD Graphics 770,Windows 11 Supported.
  • The processor features Socket LGA-1700 socket for installation on the PCB,30 MB of L3 cache memory provides excellent hit rate in short access time enabling improved system performance.
  • ROG STRIX Z690A GAM WF D4 Motherboard with Intel LGA 1700 socket: Ready for 12th Gen Intel Processors,Optimal Power Solution: 16+1 DrMos with ProCool II power connector, high-quality alloy chokes and durable capacitors to support multi-core processors.
  • Optimized Thermal Design: Integrated I/O cover and VRM heatsinks with high conductivity thermal pad, four onboard M.2 heatsinks and M.2 backplate for the M.2_1 slot,High-performance Networking: On-board Intel WiFi 6 (802.11ax) and Intel 2.5 Gb Ethernet with ASUS LANGuard.
  • Best Gaming Connectivity: Supports HDMI 2.1 and DisplayPort 1.4 output, four M.2 slots, as well as USB 3.2 Gen 2x2 Type-C,Intelligent Control:  ASUS-exclusive AI Overclocking and Two-Way AI Noise Cancelation to simplify setup and improve performance.
Check Stock

LoveRPi Performance Pro Active Cooling Case White for Raspberry Pi 3 ODROID-C2

  • MAXIMUM PERFORMANCE: Raspberry Pi 3*/2/B+ and ODROID-C2/C1+**.
  • DUAL MODE ACTIVE COOLING: ABS Case comes with 4 Rubber Feet, 8 Screws, Active Cooling Fan 5V or 3.3V Operation.
  • ACCESS TO EVERYTHING: Camera Cable Slot, Display Cable Slot, GPIO Cable Slots! Beauty without compromising capability!.
  • USABLE WITH TALL HEATSINKS: Fits LoveRPi High Surface Area 10mm Heatsink Set, Keeps Raspberry Pi 3 at Maximum Performance and Cool (under 60C).
  • Raspberry Pi 3 MicroSD card slot does not have a spring. PLEASE REMEMBER TO REMOVE THE MICROSD CARD PRIOR TO INSTALLING OR REMOVING THE CASE!.
Check Stock

GPU Support Bracket, Adjustable Height Graphics Card Support Desktop Computer PC Telescopic Graphics Card Bracket GPU Brace Video Card Anti Sag GPU Holder Stand for Prevent Universal Graphics Card

  • ✅【Graphics Card Support】 -- This graphics card support bracket is to provide support for the end of the graphics card, to keep the graphics card in a parallel state, and to avoid the graphics card from malfunction due to gravity deformation. If you have a big and heavy graphics card, you might need 2 or more GPU support bracket..
  • ✅【All-aluminum metal material】-- 2022 updated graphic card support brace, this GPU stand is made of quality aluminum metal material, provides strong and long-lasting support..
  • ✅【Magnet Base Design】-- The magnet hidden in the GPU support bracket base is designed for easy installation and more stable standing in the chassis. No slip when using this GUP stand..
  • ✅【Adjustable Height Graphic Card Support Brace】 -- Simply twist the nut of graphic card support stand to adjust height as you need, no need other tools. This GPU bracket support height from 2.84inch to 4.73inch (7.2-12cm). Adjustable height graphics card bracket make it wide compatible with many chassis configurations..
  • ✅【100% Satisfaction And Guaranteed】-- If for whatever reason you are not absolutely 100% satisfied by our GPU support bracket, we will refund or replace new graphics card support, no question asked! All question will be res....
Check Stock

GeeekPi Raspberry Pi Cluster Case for Raspberry Pi 4 Model B, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Raspberry Pi 3/2 Model B

  • Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
  • Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
  • The case includes cooling fans and heatsink for cooling down your Raspberry Pi better. The metal protective cover on the top will protect the cooling fan against being destroyed..
  • The stackable case can provide you with an environment to put four pieces of Raspberry Pi board together. The instruction manual will tell you how to assemble step by step..
  • Package Includes: 5x Acrylic Plates, 4x Cooling Fans with Metal Protective Cover, 12x Heatsinks for Raspberry Pi 3B+/3B/2B,16x Heatsinks for Raspberry Pi 4 Model B(Added on 2019.8.2), 1x Screw Set, 1x Screw Driver,1x Instruction Manual.
Check Stock

LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3, Libre Computer Board, ASUS Tinker Board (Translucent)

  • ULTIMATE PERFORMANCE AND DURABILITY: Exclusively designed for the Raspberry Pi 3 Model B+, Libre Computer Boards, ASUS Tinker Board, and ODROID-C2***, this revolutionary case is built with durable polycarbonate and active cooling fan to provide performance and protection to your SBC..
  • INTRICATE FEATURES: We analyzed over 30 cases and created four revisions to build this final case design. It features numerous design elements not found on any other case and takes into account all of the popular single board computers on the market..
  • QUICK AND EASY ASSEMBLY: Screw optional design uses numerous latches to secure both the board and the case together. MicroSD card slot is extended to prevent damage allow for easy tool-less removal. GPIO ribbon cable slot enables expansion without sacrificing protection..
  • TRANSLUCENT WITH FRONT LED AND IR: Sleek design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor)..
  • TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best results..
Check Stock

Serounder Laptop External Independent Video Card Dock for Mini PCI-E Without Power Supply

  • Support dual TD compatible switch (hardware conflict resolution), multistage anti-interference circuit and data line reinforcement. Compatible with graphics card, sound card, array card, video card, collect card, etc..
  • 8p power output interface can connect 220W power supply and ATX cable with ATX desktop power. Reinforcement design for data transfer line. High quality electronic components. Isolation protection circuit. Use for engineering measurement, data collection, server debugging, GPU computing and other industrial applications, most of the graphics card to play the game..
  • Unsupported models:Not fit for Asus N55SF/N75SL/ASUS/A53XI24/1SV-SL/K43SD/A73S /K53SD/X8dij/A43s/N55SL/K45dr, Not fit for Lenovo E530/L430/E43/U410/E49/K49/G50-75M(New Add),Not fit for HP H533OM/6910/5310M,Not fit for Hasee ui45/EVI4,Not fit for Haier T68,Not fit for Acer 4739z/E1-451G,Not fit for Samsung 450R/270e5k/np450r5j-x05cn,Not fit for Dell 5437/N55SL.
  • Instructions: Disable the built-in independent graphic card in the BIOS and turn off the network. Update BIOS of the notebook to the latest version. (You can see the update method in the offic....
Check Stock

ELUTENG 1X to 16X PCIe Adapter for GPU Mining Rig 4 Solid Capacitors Powered Pcie Extender with 60cm 6Pin USB 3.0 Cable PCIe Riser 4PIN/6PIN/SATA 3-Pack

  • 【8 High-quality solid capacitors】8 FP independent solid capacitors are customized for the graphics card power supply. Compared with the general 4 capacitors, the graphics card power supply can be more stable and safe. The extension cord has a 6Pin interface to strengthen the power supply, effectively solving the problem of insufficient power supply capacity..
  • 【Metal graphics card slot】 The graphics card slot in the middle is a reinforced metal structure. Compared with the plastic bayonet, the metal bayonet has a tighter structure. The slot has a fixed buckle, which is convenient for removing and fixing the graphics card, so that the graphics card will not get out of the slot. Note: Please refer to Picture 3. Please pay attention to the direction of the graphics card during installation to prevent the graphics card from being burnt..
  • 【3 power supply methods】3 power supply methods are used: SATA power interface, 6Pin power interface (Double), and peripheral 4-pin power supply. The power can be plugged into any interface to work normally. The graphics card has an independent power supply to reduce the load on the motherboard. You can freely choose according to the actual use environment.
  • At the same time, it is equipped with LED power indicato....
Check Stock

Cable Matters 2-Pack 8-Pin PCIe to Molex (2X) Power Cable 4 Inches

  • PCI express power cable adapter connects a PCIe video card with an 8 pin connector to a power supply with two spare L4 Molex power connections.
  • Check that your PSU is rated to power the video graphics card.
  • PSU upgrade saver power cable provides an option for a power supply without a PCIe connection for GPU power.
  • Dual Molex connectors are designed to connect to separate rails on different Molex daisy chains to power a PCIe video graphics card from an older PSU.
  • 8 pin PCIe to Dual Molex female to male cable provides a convenient solution for video graphics card power with two Molex connectors for GPU cards that require more power.
  • Sturdy graphics card power cable has male Molex connectors and a female PCI connector with a latch to prevent accidental disconnections.
  • Video graphics card compatible with graphics cards from popular manufacturers such as EVGA GeForce, Gigabyte, Sapphire, and XFX.
Check Stock

Tempco Men's Fisherman Vest - TM209-CHARCOAL XL

  • Well Packaged - With a storage box for 102pcs heatsinks, it perfectly divides the heat sinks into 17 categories..
  • Multiple applications - It can Cool Raspberry Pi VRM VRAM CPU GPU Small IC Laptop 3D Printers Stepper Motor Modules TMC2130 TMC2100 A4988 DRV8825 TMC2208. Multiple sizes, multiple application scenarios..
  • Good heat dissipation effect - Various Aluminum and Copper heat sinks with Thermal Conductive Adhesive Tape for cooling Raspberry Pi 4 and electronics components..
  • Different Sizes - 102pcs multicolor heatsinks in different sizes contains 92pcs aluminum heatsink and 10pcs copper heatsink..
  • Package Includes: 102pcs multicolor heatsinks, 1x Storage Box..
Check Stock

LoveRPi Active Cooling Media Center PC Case with Fan for Raspberry Pi 3 Model B+, Libre Computer Board, ASUS Tinker Board (Black)

  • MATTE BLACK WITH FRONT LED AND IR: Sleek matte black design is perfect for media center applications with a clean glossy front cover for LEDs and IR sensors found on Libre Computer Boards and the ODROID-C2. Raspberry Pi 3 requires separate IR receiver (diode + transistor)..
  • TWO FAN SPEEDS AND SUPPORTS TALL HEATSINKS: Brushless DC fan can be connected to 5V for maximum performance or 3.3V for quiet cooling. Can be used with tall heatsinks up to 12mm for best results..
Check Stock