ReviewsGreen Diode Laser Module

Fast Recovery Diode Module Full Crimped Structure MBRP400200CT 200A 25V -55~150℃ Rectifier Diode Module

  • FULL CRIMPED STRUCTURE: The diode module has full crimped structure with excellent temperature characteristics and power cycling capability.
  • AIR-COOLED AND WATER COOLING: The full crimped recovery diode block below 200A are forced air-cooled, modules above 300A are selected for air-cooled and water cooling.
  • STABLE PERFORMANCE: High quality of the diode recovery module can provide stable performance. Simple installation, easy to use and maintain.
  • AC 2500V: The recovery diode module is easy to use, the chip is electrically insulated from the backplane, 2500V AC voltage.
  • SPECIFICATION: ​Forward Average Current IF (AV): 200A.
  • One-cycle Forward Non-repetitive Surge Voltage IFSM: 25V.
Check Stock

farhop 5mW 532nm Green Laser Diode Module ECONOMICAL 532-D-12-48-G-5-3

  • 650nm 5mw Red Dot Lazer Diode 10mw Lazer Module.
  • Adjustable Foucs Dot based on your Working distance.
  • ACC Circult Design and Industry Class Laser.
Check Stock

CenryKay 5V 650nm 6mm 5mW Red Dot Laser Head Red Laser Diode Laser Tube Pack of 20

  • 5V 650nm 5mW Red Dot Diode Laser Head Red Laser Diode 6mm Red Laser Diode Laser Head.
  • Laser Modules Wavelength: 650nm. Working Voltage: 5v.
  • Application: Level instrument, Ground instrument, Long distance laser listener remote light control, Long distance laser wireless communication.
Check Stock

Hilitchi 40Pcs Mini Laser Dot Diode Module Head WL Red 650nm 6mm 5V 5mW and 3V 5mW and Light Dependent Resistor LDR Sensor 5 mm GM5539 5539

  • 5V 650nm 5mW Red Dot Diode Laser Head Red Laser Diode 6mm Red Laser Diode Laser Head.
  • Wide range of wroking temperature: -10°C to +40°C.
  • Application: Level instrument, Ground instrument, Long distance laser listener remote light control, Long distance laser wireless communication.
  • Can be used to connect diode tubes for multiple use.
Check Stock

Laser Safety Glasses Eye Protection for IPL/E-light Hair Removal Safety Protective Glasses Universal Goggles Eyewear

  • Laser Safety Glasses Protection Scope:200 - 540nm O.D 6+ & 900 - 1100nm O.D 5+.
  • Application:2 line Laser ,Alexandrite Laser Safety Glasses, Diode Laser Safety , ND:YAG Laser protection , KTP Laser safety and Q-switched Tattoo Removal Laser Protective.
  • Typical laser wavelength：405nm,532nm, 980nm , 1064nm.
  • Laser Hair Removal Safety ,Green laser Safety Glasses,Blue Laser safety Glasses,Picosecond laser safety Glasses(blue), UV laser Protection.
  • Special for ergonomics, harmlessness, comforts, airing and flexibility.Safety glasses with wrap-around design.Flank with unique ventilation and protection system, protect eyes from splashing all-round..
Check Stock

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • ...onger RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection methods, such as viewing the engraving progress, adjusting the carving speed and other operations. In particular, this laser engraver has 4 connection modes: ①SD Card Connection ②USB Connection ③APP Connection ④Computer IP Address Connection..
  • POWERFUL COMPATIBILITY & 1v N SPECIAL FUNTION: As the latest 32-bit chip is used, the engraving machine is compatible with LaserGRBL and paid LightBurn software, and supports the import of BMP, JPG, PNG, DXF, AI, SVG and other file formats. The 1v N Special function refers to controlling multiple....
Check Stock

HiLetgo 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

  • 5V 650nm 5mW Red Dot Diode Laser Head Red Laser Diode 6mm Red Laser Diode Laser Head.
  • Wide range of wroking temperature: -10°C to +40°C.
  • Application: Level instrument, Ground instrument, Long distance laser listener remote light control, Long distance laser wireless communication.
Check Stock

Laser Level with Tripod, 50 ft Laser Leveler Tool Laser Level Green Cross Line Self Leveling, Separate Control 2 Lines, Laser Level for Picture Hanging Construction DIY Light Duty Indoor Project

  • Green Diode Technology: our self leveling laser level adopt green laser which is 2 times brighter than red laser with the same light source, very accurate and clear, very stable in indoor using.
  • If you need to use it outdoors, we recommend using it at dawn, dusk or on cloudy days laser viewing glasses to get any outdoor accuracy.
  • With Adjustable Laser Level Tripod: package included laser Level self leveling in green cross line, it also included laser level tripod with adjustable height legs.
  • The tripod features a steady adjustable base that swivels, adjusts, and tightens laser level for steady measurement applications.
  • The laser level tripod max height is 4.46 feet/ 136 cm.
  • Multiple Modes to Suit Your Needs: this laser leveler tool has 2 modes including self leveling mode and manual mode.
  • This laser has an internal pendulum which helps the level ascertain level lines and true plumb.
  • In self leveling mode, this laser tool is self leveling if slope within 3 degree.
  • When out of 3, the laser tool will alarm and lines will blink.
  • In manual mode allows the laser tool to project non level lines, you can use this laser tool at any angle.
Check Stock

Baluue 10pcs Vibration Sensor Module Normally Closed Alarm Switch Module High Sensitive Efficient Vibration Switch Module for Car Truck Auto Vehicle

  • TCRT5000 infrared emitting diode constantly launch infrared sensor, the infrared ray is emitted when reflected back were not reflected or but strength is not big enough, the infrared receiving tube has been in the off state, the output end of the module at this time as the low level, indicating diode has been put out state.
  • Tested objects appear within the scope of testing, infrared light is reflected back and strength is enough big, infrared receiving tube saturation, at this time the output of the module for the high level, indicating diode lit up..
Check Stock

Comgrow Z1 Laser Engraving Machine 5W Output Power, Laser Cutter and Engraver Machine 24V Compressed Spot 10000mm/min with Eye Protection for Wood Metal Glass Acrylic Leather 15.7'x15.7'

  • 【Powerful Laser Technology】: Comgrow Z1 laser cutter and engraving machine, with 5W diode laser module, 0.08 mm laser spot gives a precise cutting and engraving. Powerful laser units are available for cutting 5mm thickness of plywood at one time.
  • 【DUAL Y-AXIS MOTOR】: The Y-axis of acrylic engraving machine is extremely smooth and extremely mobile. Not only provides almost unbelievable speed when engraving but also increases the stability and accuracy of the project..
  • 【Extensive software adaptability & Multiple connection methods】：Z1 laser engraver can be compatible with various mature engraving software, LightBurn for experirenced laser user and LaserGRBL for new laser user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data via Wi-Fi, USB cable, and SD card and use Z1 laser cutter and engraver machine anytime and anywhere..
  • 【SUPPORT EXPANSION】: This device It can be upgraded with Comgrow rotary roller, perfect for engraving tumblers and cylindrical objects! It has a stable design for multiple diameters. Spacing between the two rotary axes ranges from 8mm(0.31in) to 86mm(3.9in). You can engrave angthing you want..
  • 【More Choices 】: 5W or 10W high-power laser prov....
Check Stock

Firecore Self-leveling Laser Level 65ft Green Beam Rechargeable Cross-Line Laser Tool for Indoor Picture Hanging/Wall Painting/Drop Ceiling/Tile/Cabinet Installation F113-XG

  • ✔️High Visibility and Precision: The green cross line laser level adopt advanced diode technology, the bright green-beam laser lines make your job....
  • ✔️Rechargeable Laser Level: This cross line laser level uses two 1000mAh rechargeable batteries, equipped with Type-C charging cable to optimize....
  • ✔️Self-Leveling & Manual Mode: Unlock the pendulum, Self-leveling Mode is enabled. This laser tool could self-leveling when located on an inclined....
  • ✔️Handy and Easy Operation: Compact and lightweight for easy gripping. Over-molded housing design and IP55 water/dust resistance ensures you work....
  • ✔️Flexible Mounting Device: The included strong magnetic L shape bracket allows for attachment to most metal surfaces and support you to turn the....
Check Stock