ReviewsGrip Puller

Franklin Sensors FS710PROProSensor 710+ Professional Stud Finder with Built-in Bubble Level & Ruler,Yellow & Zenith Industries ZN700001 Trim Puller

  • 【Multifunctional application】 The trim puller is specially designed for removing baseboards, tiles, door casings and other decorative panels....
  • 【Remarkable Design】 The baseboard trim removal tool with a wider and flatter contact area can disperse the stress, and with the integrated....
  • 【Eximious Steel】 The trim puller is made of 3.2mm thick high-strength martensitic stainless steel, with excellent wear resistance and corrosion....
  • 【Damping Grip】 The handle adopts the EDPM rubber encapsulation process, which has a comfortable grip and provides anti-slip effect, so there is no....
  • 【Excellent service】 Trim puller can provide you with various conveniences and improve work efficiency. If you have any questions about purchase,....
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6"8" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and 6-inch and 8-inch gear pullers both have 6 positions..
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach,and a 8-inch gear puller with a 10.75-inch jaw spread and 8.75-inch jaw reach.
Check Stock

97PCS Dent Puller Kit, Paintless Auto Body Dent Repair Kit with Golden Lifter, Slide Hammer T-bar Dent Puller, Bridge Puller, Suction Cup and Glue Gun for Car Dent Remove Auto Body Dent Removal Kit

  • 【Paintless Dent Repair Kit Professional】Our Dent Puller is made of superior alloy+plastic, and the contact parts of the body are high-class rubber precision package, which can avoid damage to the original car paint..
  • 【Ergonomic Design】Auto body tools are ergonomically designed using the lever principle. Ensuring a comfortable grip and reducing hand fatigue, allowing you to work for longer periods without discomfort..
  • 【Efficient Repair】The gold dent lifter and bridge dent puller can adjust the level to better fit slight dents with less effort and efficiently. T-bar puller comes with 2 different big puller lines. For big dents, you can use the puller lines.For small dents, you can use the blue glue tabs..
  • 【Versatile Dent Puller Kit】The car dent repair kit is perfect for a wide range of auto body repair tasks, including dent fix, hail damage repair, and more. These body repair dent removal tools can be used on various surfaces, including metal, plastic..
  • 【Comprehensive Set】1x Bridge Dent Puller(with 8 x accessories), 1x T-bar Puller(long and short type), 1x Gold De....
Check Stock

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check Stock

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

ABN Slide Hammer Puller Set - 5 lb Slide Hammer Axle and Hub Puller and Dent Remover Unit Auto Body Hammer Tool

  • [Versatile Slide Hammer Set] Whether pulling out deep dents on metal surfaces or removing mechanical, press-fit parts, the ABN 5 Pound Slide Hammer Bearing Puller Set works wonders.
  • Lightweight dent puller slide hammer tool ensures maximum pull power.
  • [Fits Your Needs] Each slide puller set includes a 23-inch (58.4cm) T-style slide hammers bar, a 5 lb hammer weight, and a nut.
  • 3-inch machined threaded section fits your internal or external 5/8-inch x 18 threaded adapters (not included).
  • [Easy to Use] Once attachment has been connected and is in place, slide the large slide hammer close to the end of the CV joint puller tool.
  • Then, pull back on the T handle, while you snap the weight towards the handle.
  • Weighted slide hammer adds torque and pull-power.
  • [Safe for Your Vehicle] Slide hammer and attachment design focused the added torque to a stable area to prevent damage that can happen when trying to remove press-fit parts.
  • [Built to Last] Hardened shaft and chrome-plating ensure optimum strength and resistance from rust, while the 4.7-inch (12cm) T-shaped handle provides a proper gr....
Check Stock

OTC 7948 Silver Slapper 10-Way Slide Hammer Puller Set with Storage Case

  • OTC's 7948 'Silver Slapper' 10-Way Slide Hammer Puller Set with Storage Case allows you to pull flange-type rear axles, remove stubborn oil seals and bearings and other press-fit parts.
  • Jaws can be set up for 2 or 3-way internal or external pulling for the ultimate in tool flexibility.
  • Includes: 1155 Slide Hammer with 5 lb. hammer and 'T' handle, 7372 - Rear Axle Pulling Attachment, 24544 - 3-Way Cross Head, 24545 - Cone, 27241 - 2-Way Cross Block, 27315 - Puller Hook Attachment.
  • 34698 - 3ea. Pulling Jaws for internal/external use.
  • 4148 - 3ea. 6-1/2 inch Pulling Jaws for internal/external use.
  • 32054 - 3ea. 2-3/8 inch Pulling Jaws for internal use.
  • 05378 - Grip Wrench Adapter w/single lead (wrench not included).
  • 205377 - Dent Puller, 309321 - Forcing Screw.
  • durable blow-molded case keeps set components contained and organized.
Check Stock

MOFEEZ 3\ 4\ 6\ inch 3-Jaw Gear Puller ¨C Gear Removal Tool for Slide Gears, Pulley, and Flywheel

  • DAMAGE-FREE REMOVAL: This Mofeez 3" 4" 6" Inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free.
  • BUILT TO LAST: Constructed from forged and hardened steel for strength and longevity.
  • Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
  • VARIOUS APPLICATIONS: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application.
  • 3 OR 6 POSITION DESIGN: The universal and reversible jaws offer versatile inside or outside grip along with short or long reach.
  • The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.
  • PACKAGE CONTENTS: Included is a 3-inch gear puller with a 4.5-inch jaw spread and 1.5-inch jaw reach, 4-inch gear puller with a 6.25-inch jaw spread and 2.5-inch jaw reach, and a 6-inch gear puller with a 8.75-inch jaw spread and 4.75-inch jaw reach.
Check Stock

ABN Bolt Grip Set – Gear Puller Steering Wheel Puller Pulley Puller Harmonic Balancer Puller Crank Puller 43pc

  • GET THE JOB DONE: The ABN | Deluxe Master Bolt Extractor Grip Set is designed to be used on your pickup truck, SUVs, and small engine vehicle as a steering wheel puller kit, gear pully puller, harmonic puller, and crank pulley tool.
  • Can also handle 2 and 3-way bolt pulling applications.
  • VARIOUS SIZES: Bolt sizes – M8x1.25x90mm, M8x1.25x45mm, 1/4-28UNFx3” inches, M8x1.25x65mm, 5/16-24UNFx3” inches, 5/16-18UNCx3.5” inches, 3/8-24UNFx1.5” inches, 3/8-16UNCx2” inches, 3/8-16UNCx3” inches, 3/8-16UNCx4.5” inches, M10x1.5x35mm.
  • BUILT TO LAST: Puller remover tool kit has a forged 3-way puller flange construction and grade 8 hardened steel bolts for maximum strength and longevity.
  • EASY STORAGE: Heavy-duty 14.75” x 3” x 11.3” inch (37.5cm x 7.6cm x 28.7cm) plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Compartments include sizing labels for easy identification.
  • PACKAGE CONTENTS: 43-piece pulley removal tool set includes (1) 3-way puller flange/yoke (with 4 slots for 2 or 3 hole applications), (2) different length live-center forcing screws, (4) 3-inch and 6-inch live-center adapters, (3) of each size of bolt, and (1) carrying case for your convenience.
Check Stock

8MILELAKE 6pc Front End Service Tool Kit Ball Joint Separator Pitman Arm Tie Rod Puller

  • [APPLICATION] : This front end service tool allows for easy removal of most popular types of pitman arms, Tie Rods and Ball Joints.
  • [FEATURES] : Press type ball joint separator allows for ball joint removal without damage to boots and other part.
  • [ALL IN ONE] : This Ball Joint Separator, Pitman Arm Puller Comes with 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x plastic carry case..
  • [DURABLE MATERIAL] : Durable heavy duty forged front end service tools constructed from heat-treated alloy steel with anti rust plating finish. the jaws are shaped to ensure a positive grip, which leaves your hands free for the pulling job..
  • [PORTABLE CASE] : A plastic carry case is included, keep your tool parts well organized, easy for storage and carry out.
Check Stock

Guitar String Winder String Cutter and Pin Puller 3-in-1 Guitar Tool Guitar Repairing and Adjustment Tool for Acoustic and Electric Guitars - 2 Pack

  • GRIP Winder's patented innovative dual bearing construction for effortless, silent & super fast winding combined with safe scratch-free & clank free rubber lined design that works on Electric, Acoustic, Classical and Bass Guitars.
  • GRIP Winder fits virtually all tuning pegs and narrow profile keeps your from hitting other pegs or headstock. Ergonomic handle and bonus 10mm hex wrench to safely tighten the most popular (10mm) tuning machine bushings..
  • GRIP Cutter high quality chrome vanadium steel blade is spring-loaded and comes with a convenient storage sheath when not using..
  • GRIP Cutter is perfect for cutting all string types from big bass strings to your smallest guitar string, and the ergonomic non-slip comfort grips feel so good..
  • GRIP Puller is a premium, innovative bridge pin puller for acoustic guitars. The metal free, ergonomic and clever design helps easily lift the pins..
Check Stock