ReviewsGroove Bearing

［10 Pack］ 608 2RS Ball Bearings – Bearing Steel and Double Rubber Sealed Miniature Deep Groove Ball Bearings for Skateboards, Inline Skates, Scooters (8mm x 22mm x 7mm)

  • Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions..
  • Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on..
  • With small friction and high-limit speed : 34000.00 rpm, SHKIBY Deep Groove Ball Bearings are cost-effective and require little maintenance..
  • Pack of 10 pcs 608-2RS steel ball bearings (8x22x7mm), double-rubber sealed deep groove..
  • This 608 2RS shielded 8x22x7 miniature ball bearing is a single-row bearings for supporting radial loads. The bearings is made of bearing steel for durability and resistance to rust, corrosion and deformity under heavy loads, and is Shields on both sides keeping lubricant in and contaminants out..
Check Stock

FKG 99502HNR Bearing ID 5/8 x OD 1-3/8 x Width 7/16 Pre-Lubricated 10 Pcs

  • Size: FKG deep groove ball bearings have an inside diameter of 5/8", an outside diameter of 1-3/8" and a width of 7/16".
  • Rubber seal: These deep groove ball bearings have double-sided rubber seal to prevent the ingress of impurities and to save lubricant..
  • Performance: FKG ball bearing have the advantages of low noise, fast heat dissipation, low friction, high speed and high temperature resistance..
  • Good quality: These ball bearings are made of high quality bearing steel. Its steel construction makes it durable and resistant to deformation under....
  • Application: Widely used in industrial machine, motorcycle, automobile, power tools and mechanical equipment and other kinds of field.
Check Stock

Witproton Ball Splines with Both Ends Stepped and Tapped 13mmX250mm 1pc

  • Low friction: The ball does not cycle and can achieve rolling motion with minimal friction..
  • High precision linear movement: as part of shaft and nut, the clearance in rotation direction can be adjusted to ensure accuracy..
  • Transferable rotating torque: the ball rolls on the ball groove of the spline shaft and moves in a straight line while transferring the rotating torque..
  • Compact design: even a single shaft mechanism can move in a straight line, while keeping the nut in the direction of rotation without deviation..
  • Large bearing capacity and long service life: Because the rolling surface adopts r-shaped ball groove matching with the ball diameter, the contact area is large, the bearing capacity is strong and the service life is long..
Check Stock

Driak 4x13x6mm V624ZZ High Carbon Steel Deep V Groove Pulley Rail Wheel Ball Bearings,20pc

  • 20pcs Deep Metal V Groove Guide Pulley Rail Ball Bearings Wheel 4*13*6mm.
  • This item is ordinary precision, adaptation to low speed, low load applications..
Check Stock

Donepart MR52ZZ Bearings - 2mm Bore ID, 5mm OD, 2.5mm Width Double Shielded Miniature Chrome Steel Ball Bearing for Fidget Spinners, Micro Motor, Office Equipment (10 Pack)

  • MR52ZZ Miniature Single Row Deep Groove Ball Bearing..
  • Bearing made from Chrome Steel for durability and resistance..
  • The deep groove design provides more accurate pathway for the balls..
  • Standard Bearings, High-Quality Chrome Steel Good Resistance to Damage and Durable..
  • Features: simple configuration, less coefficient of friction,less vibration and noise..
Check Stock

FGen 100pcs Low Noise Motor Dedicated 608RS Skateboard Bearing Fingertip Gyro Special Bearing Red

  • Bearing material: bearing material is divided into bearing steel, high carbon steel, low carbon steel, sealing material is divided into iron cover and....
  • Bearing model: 608RS bearing length: 8mm * 22mm * 7mm, with skateboards, skates, roller skates, long, electric skateboard, the highest precision in....
  • Deep groove ball bearings are mainly subjected to radial loads and can also bear both radial and axial loads. When it is only subjected to radial....
  • This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing....
  • Dimensional range and form vary, used in precision instruments, low noise motors, automobiles, motorcycles and general machinery, etc. It is a widely....
Check Stock

CNBTR U-Type Pulley Wheel with Steel Bearings 8mm Shaft Hole 45mm Diameter for Max-Load 167kg Pack of 4

  • Overall size: outside diameter 45mm/1.77in.
  • R=3mm/0.12in. Please check carefully the size before purchasing..
  • Bearing Model 608ZZ Mini Deep groove ball bearings, fashionable, slide flexible, compression wear.Smooth motion, high printing precision, low noise, can greatly improve the printing speed..
  • Ideal for replacement roller of sliding window, door, printer machine etc..
Check Stock

Accusize Industrial Tools MT3 Precision Medium Duty Live Center, Overall Length 6.69'', 0537-6437

  • Precision Medium Duty Live Center For General Purpose On Manual Engine Lathe.
  • The live center has a combination of deep groove ball bearing, thrust ball bearing and needle bearing..
  • The anti-dust seal can prevent cutting fluid and dust from entering into the center bearing.
  • The 60° rotating spindle is made from carbon alloy steel with heat treatment to HRC 58±2 for high rigidity and wears resistance.
Check Stock

Jack Boss Jack Pad Universal Large Floor Jack Rubber Pads Adapter Pinch,Weld Side Frame Rail Protector Puck/Pad (1 Pack)

  • 【Material&Function】Sturdy rubber jack pad is durable and non-deformable with long service life.Soft enough pad surface is to prevent frame rails and pinch welds from bending,and protect painted or coated chassis parts when using floor jack to lift the car.
  • 【Unique Groove Design】Center down groove design of floor jack adapter provide more cushion and crush resistance.The wider and deeper groove contact area than other rubber pads ，making groove aligns nicely insert weld.Fits snug at the base and sits very sturdy on the jack.Have greater security.
  • 【Size&Note】Jack pads diameter：4.17 inch.Thickness:1 inch.Groove width:0.7inch.Groove depth:0.23 inch.Maximum load bearing:3 Ton. 1*jack pad. Please measure floor jack's saddle size before purchase.
  • 【Universal Floor Jack Rubber Pad】Protector Puck/Pad fit most standard hydraulic floor jacks and vehicles.Easy to install and change.
  • 【Notes】If you have any question you can contact us，we will be the first time to solve for you.Our floor jack pads are tested for strict quality.
Check Stock

FKG 6204-2RS 20x47x14mm Deep Groove Ball Bearing Double Rubber Seal Bearings Pre-Lubricated 10 Pcs

  • Size: FKG deep groove ball bearings have an inside diameter of 20 mm, an outside diameter of 47 mm and a width of 14 mm..
  • Rubber seal: These deep groove ball bearings have double-sided rubber seal to prevent the ingress of impurities and to save lubricant..
  • Performance: FKG ball bearing have the advantages of low noise, fast heat dissipation, low friction, high speed and high temperature resistance..
  • Good quality: These ball bearings are made of high quality bearing steel. Its steel construction makes it durable and resistant to deformation under heavy loads..
  • Application: Widely used in industrial machine, motorcycle, automobile, power tools and mechanical equipment and other kinds of field.
Check Stock

RWM Casters VIR-0415-08 4 Diameter X 1-1/2 Width Cast Iron V-Groove Wheel with Straight Roller Bearing 700 lbs Capacity Black

  • 1/2" Axle diameter, 1-7/8" hub length and 700lbs capacity.
  • 4" x 1-1/2" V-groove wheel with straight roller bearing.
  • Hub length can be cut or lengthened with spacers.
  • Temperature range from -50 degree F to 800 degree F.
  • 7/8" Width of groove and 7/16" depth of groove.
Check Stock