ReviewsGrooving Insert

THINBIT 3 Pack SGI040D2 0.040\ Width 0.100\ Depth, Uncoated Carbide, Sharp Corner, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..

Check Stock

THINBIT 3 Pack SGI039D5 0.039\ Width 0.100\ Depth, Uncoated Carbide, Sharp Corner, Grooving Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
Uncoated DURA-MAX 5000 carbide grooving insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..

Check Stock

THINBIT 3 Pack SGI012D2FR 0.012\ Width 0.036\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
Designed for plunge grooving up to .036" deep. Can also be used for parting stock up to .072"..
Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..

Check Stock

THINBIT 3 Pack SGI062D2FR 0.062\ Width 0.100\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Steel, Cast Iron and Stainless Steel with Interrupted Cuts

See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
Designed for plunge grooving up to .100" deep. Can also be used for parting stock up to .200"..
Uncoated DURA-MAX 2000 carbide grooving insert for steel, cast iron and stainless steel with interrupted cuts..

Check Stock

THINBIT 3 Pack SGI029D5E 0.029\ Width 0.087\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel and Stainless Steel Without Interrupted Cuts

See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
Perfect for o-rings, snap rings and piston rings. Cuts within 1/16" of collet face or shoulder of larger diameter..
Designed for plunge grooving up to .087" deep. Can also be used for parting stock up to .174"..
TiAlN Coated DURA-MAX 5000 carbide grooving insert for steel, titanium, nickel and stainless steel without interrupted cuts..

Check Stock

THINBIT 3 Pack LGT062D5RFR 0.062\ Width 0.155\ Depth, Uncoated Carbide, Full Radius, Grooving Insert for Non-Ferrous Alloys, Aluminium and Plastic Without Interrupted Cuts

See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
Cuts up to .155" deep. Can be used for parting stock up to .310". Cuts flush to collet face or shoulder of larger diameter..
Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
Uncoated DURA-MAX 5000 carbide grooving insert for non-ferrous alloys, aluminium and plastic without interrupted cuts..
Use with Large series toolholders. Use RH straight or LH 90 degree..

Check Stock

THINBIT 3 Pack LGT040D2RE 0.040\ Width 0.100\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel Alloys and Stainless Steel with Interrupted Cuts

See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
Cuts up to .100" deep. Can be used for parting stock up to .200". Cuts flush to collet face or shoulder of larger diameter..
Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
TiAlN Coated DURA-MAX 2000 carbide grooving insert for steel, titanium, nickel alloys and stainless steel with interrupted cuts..
Use with Large series toolholders. Use RH straight or LH 90 degree..

Check Stock

THINBIT 3 Pack LGT020D2RE 0.020\ Width 0.060\ Depth, TiAlN Coated Carbide, Sharp Corner, Grooving Insert for Steel, Titanium, Nickel Alloys and Stainless Steel with Interrupted Cuts

See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
Cuts up to .060" deep. Can be used for parting stock up to .120". Cuts flush to collet face or shoulder of larger diameter..
Designed for grooving and multi-directional turning. Use to generate grooves, arcs and angles..
TiAlN Coated DURA-MAX 2000 carbide grooving insert for steel, titanium, nickel alloys and stainless steel with interrupted cuts..
Use with Large series toolholders. Use RH straight or LH 90 degree..

Check Stock

TJATSE Carbide Inserts MGMN200-G Grooving Inserts for MGEHR/MGIVR CNC Lathe Cut Off Turning Tool-5 Pieces/Pack

♥Size Information: 5pcs MGMN200-G carbide insert: 6mm x 3mm x 2mm, fit for MGEHR / MGIVR grooving cut-off tool..
♥MGMN200 Carbide Inserts made of solid carbide, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance..
♥Specially designed chip breaker allows for narrower chips to promote better chip flow, great for grooving applications and can reduce the tool grinding cost and improve the cutting efficiency..
♥ Tin coated universal grade is suitable for steel and cast steel continuous cutting and interrupted cutting finishing to roughing. Also enhanced the surface gloss of the cutting pieces..
♥TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee..

Check Stock

CDBP GTN-4 (SP400) CNC Grooving Carbide Inserts Steel Fit for SPB426/36 Lathe Grooving Metal Cutting Tools, 10pcs

Size, SP400, Width(B): 4.14mm, Radius(R): 0.25mm, Longth(L): 11mm.
General material for parting and grooving processing, a nanocomposite coating of a AITiSi base, high temperature stability, good hardness. Small friction coefficient, reduce the adhesion between workpiece and insert cutting edge..
Soft material parting processing is preferred, sharp cutting edge, low cutting force, low and medium-speed feed processing, pipe fittings, thin-wall parts and small parts processing..
Long processing life, competitive price, high cost performance, with better working, suitable for stailess steel, carbon steel and heat-resistant steel processing. range, A high the thermal shock resistance, suitable for light interrupted cuts..
CDBP multifunctional tools can be used in different applications, such as parting, grooving, turning, end face and profiling machining. Unique installation and chip-breaker can ensure excellent performance and production efficiency..

Check Stock

Sandvik Coromant CoroCut 2-Edge Carbide Profiling Insert, GC2135 Grade, Multi-Layer Coating, 2 Cutting Edges, N123F2-0318-RM, 0.0626\ Corner Radius, F Insert Seat Size (Pack of 10)

INSERT TYPE: 2 edge round, full profile grooving insert.
INSERT SEAT SIZE F = matching insert & tool holder.
EASY TO CHANGE INSERTS: no torque wernch needed for correct clamping and quick release.
RM = Round Medium full radius geometry, high cutting edge line securtiy with optimized chip breaking design.
START CUTTING VALUES: Stainless Steel - fnx 0.006 in/r(0.003-0.008), vc 330 sfm(290-415), fnz 0.016 in(0.009-0.022).
Steel - fnx 0.006 in/r(0.003-0.008), vc 410 sfm(365-500), fnz 0.016 in(0.009-0.022).

Check Stock