ReviewsGround Clamp

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.

Check Stock

One Speaker Setup

UNIVERSAL UNDER DESK DESIGN clamps on to desks up to 40mm thick and as narrow as 8mm for a near universal fit on most desks || Spring Clamp is easy to remove and reattach! Headphone Hook for birthday gifts.
ROTATING ADJUSTABLE HEADPHONE ARM swings underneath your desk for discreet & non-intrusive storage and swings back out for easy access..
BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs..
SOFT RUBBER PADS located on both clamp ends protect your desk or table from damage || Protects glass, woden & metal desks/tables from damage!.
Under Desk Mount for Convenient Storage. Springed C Clamp, Easy Installation..

Check Stock

Amprobe DGC-1000A Clamp Ground Resistance Tester

Ground resistance tester for measuring ground resistance, current, and continuity in multi-grounded systems.
True RMS meter provides accurate readings when measuring linear or non-linear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform.
Clamp-on head to measure resistance on a ground rod without the use of additional ground rods and without disconnecting the grounds under test.
Measures ground resistance from 0.025 to 1,500 ohms and AC current up to 10A.
Safety rated to European Standard 61010-2-32 Category III 300V, Category II 600V.
Continuity beep if the resistance is lower than 40.00 Ohms.

Check Stock

4 Ground Rod-with 15ft Ground Wire Tinned Copper UL Listed- for Electric Fences,Antennas,Satellite Dishes,Instruments,Generator Grounding Earthing

Package includes:One 3/8Inch Ground Rod (4 feet long) and the attached binding ground clamp.15ft 12AWG Tinned Copper Flexible Ground Wire.
Applications:Great for Satellite dishes, off-air antenna,generator,computer room and electric fence grounding and earthing..
Material: for ground rod,made of copper bond solid, sturdy reinforced steel.Adopted vertical electroplating technology.For ground wire,made of tinned....
Standard and Tests: for ground rod,ASTM E8/E8M-16ae1.
ASTM B368-2014 for ground wire UL listed.

Check Stock

Klein Tools CL120VP Electrical Voltage Test Kit with Clamp Meter Three Testers Test Leads Pouch and Batteries

CL120 Clamp Meter measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads.
Meter has backlit LCD for ease of viewing in low light and is CAT III 600V, Class 2 Double Insulated.
RT210 detects the most common wiring problems in standard and GFCI receptacles.
A convenient chart on RT210 helps determine wiring conditions: open ground, reverse polarity, open hot, open neutral, and hot/ground reversed.
NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications.

Check Stock

Waekon 20560 ABS Sensor Pinpoint Tester

Measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads.
Detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and....
Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord.
CAT III 600V, Class 2, Double insulation safety rating.
AC Auto-Ranging 400 amp digital clamp meter.

Check Stock

TOBWOLF Portable Camping Folding Lamp Pole with Peg, Lightweight Collapsible Aluminum Lantern Stand, Outdoor Lamp Post Hanging Light Holder Stick for Picnic, Hiking, Fishing, Backpacking, BBQ - Blue

【Compact & Foldable & Lightweight】-- Made of corrosion resistant aluminum alloy construction, the collapsible design makes it easy to carry anywhere, and it will not burden your luggage..
【Great for Desk & Ground】-- It can be inserted into the ground or fixed on the desktop. The bench clamp is suitable for table or chair with thickness less than 4.5cm / 1.77".
while the stake let you plug into ground..
【Easy Setup and Folds Down】-- It can be installed easily and safely without tools. Once you open the storage bag, just screwing up the poles one by one..
【Size Dimensions】-- Removable pole section allows you to adjust the height freely, fully assembled height 120cm / 47”. A perfect partner for camping, backpacking, hiking, traveling, picnic, spring fire, fishing and other outdoor activities for your outdoor trip..
【Package Included】-- It comes with 1 x storage bag, 3 x anodized aluminum folding lamp poles, 1 x peg, 1 x bench clamp, 1 x stainless steel hook..

Check Stock

GOUNENGNAIL- 4 Grounding Rod - 3/8 Copper Bonded Ground Rod Wire Clamp | Great for Electric Fences Antennas Satellite Dishes and other Grounding Needs 1 3/8 x4

One Kit includes:One 3/8'' Plated Copper Ground Rod (4 feet FULL LENGTH) and attached binding clamp.
Premium for Satellite dishes, off-air antenna and electric fence grounding installations.
This solid, sturdy steel reinforced copper grounding rod provides lightning dissipation for a safe grounding solution.
Easy to Install: Rolled driving spike ,better driving point.Strong enough to pound into the ground and with Pre-installed Screw Bolt Wire Clamp for....
100% after-sales guarantee. If you have any problems within 30 days of receiving the goods, you can enjoy the unconditional return refund service..

Check Stock

Lind Equipment RAC10 Retractable Heavy Duty Grounding Assembly, 10ft, 1/8\ Coiled Plated Steel Cable, Orange PVC Coated to 3/16\

Retractable grounding and bonding assembly for use in transferring flammable material.
Cast aluminum hand clamp and plated steel cable for conductivity.
Two hardened stainless steel points on the clamp for attachment to all metal surfaces and a 5/16" lug terminal for secure attachment to container or ground terminal.
10' of coiled 1/8" cable with an orange PVC jacket for safety and visibility.
Clamp is FM approved for quality assurance.

Check Stock

Sonor Concert Tom Stand STS-4000

Professional, road-ready hardware at an unbeatable price Easy to set up, adjust and tear down Open ball clamp and short hex rods for easier adjustment and rotation motion Two-segment tube clamp provides super strong clamping Wing screw/wing nuts design enforces grip on every connection Rubber feet design enhances the stability and ground contact of the stands.
Chrome-plated single tom stand with light weight and good build quality.

Check Stock

Skywalker Signature Series Ground Rod 4ft

Use this rod when grounding off-air antennas and satellite dishes for optimum protection and performance.
Includes preinstalled ground clamp for ease of installation.
Copper clad material for optimum lightning dissipation.
Includes (1) 3/8in diameter x 4ft long Ground Rod.
Essential safety measure for lightning strikes.

Check Stock