ReviewsGround Proximity Warning System Tester

Diesel Laptops Handheld Heavy-Duty Diesel Diagnostic Scan Tool with DPF Regen

【Advanced Oil Light Reset】Oil change is the most important part of the daily maintenance of the vehicle. HD3300 HD diesel scanner supports the oil service reset for Isuzu and Fuso, which allows you to reset the oil life reminder (turning off the oil warning light) during the oil change when impurities in the oil could damage the engine. This allows the vehicle to recalculate a different optimal oil change interval depending on driving conditions and climate, ensuring your driving safety..
【Manufacture-Level & OBD-Level Diagnosis】ANCEL HD3300 HD performs all system diagnostic on almost all diesel trucks compatible with standard HD OBD protocols. If the warning lights of the engine, ABS, airbag, transmission or other systems are flashing, you can use it to easily determine how serious the fault is. It also can do OBD tests, such as read codes, clear codes, view live data, retrieve vehicle infor, etc., so that you can get accurate information, save time and money in maintenance..

Check Stock

ANCEL PB100 Automotive 12/24V Power Circuit Tester Probe with ANCEL BA301 6V 12V Battery Load Tester Car Cranking Charging System Test Tool

... PB100 Circuit Tester, 1x BA301 Battery Tester.
A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
Resistance mode for reading the resistance between the tip and auxiliary ground lead.
Diode mode for checking forward bias or reverse bias..
Works on all 6V & 12V 100 - 2000 CCA lead-acid batteries, analyzes starter cranking and alternator charging condition. Cranking test to test and analyze the starting motor (cranking time, voltage, and status), and the charging test to check and analyze the charging system (load voltage, unloaded voltage, ripple status, charging system status)..
Features one-click "waveform" to record the voltage changes (current voltage, maximum and minimum voltage) in a graph during ignition. You'll know if the battery needs to be replaced or not through analyzing the values of discharge voltage, starting voltage, and charging voltag....

Check Stock

Aicevoos D2S Receptacle Tester with LCD Display, for Standard 3-Wire 120V Electrical Outlets

PROFESSIONAL OUTLET TESTING: This outlet tester is not only designed for power outlet wiring testing, but also for GFCI testing, which can quickly and accurately detect the most common wiring conditions and problems..
INSTANT INSPECTION: Just plug the circuit tester into a standard North American outlet, and the clear LCD indication instantly shows the accurate wiring status, you can understand the results without looking at the graph..
GFCI TEST FUNCTION: Press the red "leakage protection" detection button, the leakage protection switch will trip and power off in time (the air switch is not controlled). If the leakage protection switch does not trip, please contact a professional for maintenance in time.
WIRING DETECTION: Small and lightweight socket-type tester detects open ground, open neutral, open hot, double open (neutral and ground), reverse hot/ground and reverse hot/neutral wiring faults..
WHAT YOU WILL GET: 1 Piece Advanced GFCI Power Outlet Tester.
Any questions, please feel free to contact us..

Check Stock

ANCEL BA101 12V 100-2000 CCA 220AH Automotive Battery Load Tester with ANCEL PB100 Circuit Probe Vehicle Diagnostic Volt Meter 12V/24V AC/DC Resistance Detector

Includes: 1x BA101 Battery Tester, 1x PB100 Circuit Tester.
Small compact design, fast scan and direct test results display are some of BA101’s benefits. It’s a simple and easy yet quick and accurate tool for analyzing the health of a 12V battery. It tells you everything about battery’s voltage, charge, cranking power, and how much life is left of it (level of Ohm resistance)..
It checks the alternator's charging and starter's cranking conditions. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status..
A MUST-HAVE TOOL - Designed for voltage & polarity testing, continuity testing, signal circuit testing, supply power/activating components, trailer lights & connections testing. It features red/green polarity indicators, follows & locates short circuits, and checks bad Ground contacts..
4 WORKING MODES - DC Voltage mode for reading the DC voltage with a resolution of 0.1 volts.
AC Voltage mode for reading the Max. voltage, the Min. voltage, and frequency.
Resistance mode for reading the resistance between the tip and auxiliary ground lead.
Diode mode for checking forward bias or reverse bias..

Check Stock

ANCEL PB100 Automotive Power Circuit Probe Tester 12V 24V Car Test Light Electrical Diagnostic Tool Master Kit AC DC Digital Voltage Short Finder Relay Fuse Tester Trailer 3 System Thermometer 4

【What is a PB100 Probe Tester?】With the PB100 probe tester, you can check voltage and ground signals in a typical DC circuit. However, the kicker is that you can also use it to send voltage and ground signals. It works like a test light that can power circuits or provide a good known ground. This way, you can effectively test components and circuits without having to break out the old alligator clips and jumper wires. You can power or ground a circuit directly through the top of the device..
【What does it do?】The PB100 is an essential tool for automobile user. It is needed for testing components on and off the vehicle, checking for the good and bad grounds, testing for continuity and diagnosing circuit failures. For example, you can use it to turn on a blower motor. You can run power window motors, windshield wipers, and even rear window defrosters. If the vehicle owner keeps it in his car he can check system failure on his own way no need to go to technician..
【Easy to Use】ANCEL provides how-to guides and video tutorials to help you easily complete your repair work. With the press of a switch, you'll have an instant hot lead or ground lead. Use the probe tip and ground lead simultaneously to power up components right in your hand. Ins....

Check Stock

GODIAG GT101 Power Circuit Probe Tester, 4 in 1 Circuit Tester, Fuel Injector Tester and Cleaner, Relay Tester, Current Detection with Overload Protection, Working Voltage Range 6V/12V/24V DC

... choice for automotive circuit probe tester. Unlike other circuit testers that require you to use a variety of tools to troubleshoot electrical system problem, our circuit testers are perfectly capable of performing multiple types of services such as continuity testing, component activation, fuse test, checking bad ground indicator, detect voltage and current, positive and negative power supply..
【Positive and negative power supply】When the vehicle's headlights, turn signals, lift windows, sunroofs and other functions fail, our power circuit probe kit can output positive and negative power to check whether circuit components are normal, and can also perform continuity checks and resistance checks. Through these checks and diagnoses whether the path of the car circuit is interrupted, it can be found which parts of the circuit are intact, which parts are bad..
【Fuel Injector Tester & Cleaner, Relay Tester】This car power circuit probe tester tool covers the detection of fuel injectors and relays, as well as the cleaning of fuel injectors. When the vehicle has difficulty in starting, acceleration and fuel consumption, etc, it is necessary to check the fuel injector. When the car's headlights, turn signals, horn and the engine starter do not work, a....

Check Stock

SHIFTER DATING APP Books 1-10

LARGE CLEAR LCD READOUT on receptacle tester to instantly view results without the need to look at a chart to understand results.
TEST GFCI TRIP TIME IN SECONDS to find out if the trip breaker is functioning.
DETECT WIRING FAULTS of open ground, open neutral, open hot, dual open (neutral and ground), reversed hot/ground, and reversed hot/neutral.
AUTO-HOLD FUNCTION is convenient for hard-to-reach outlets.
SAFE AND DURABLE TESTER for inspections on North American 120V outlets.

Check Stock

Powermatic PJ-882HH, 8-Inch Parallelogram Jointer, Helical Head, 2 HP, 1Ph 230V (1610082)

54 FOUR-SIDED CARBIDE INSERTS: Provides smoother, quieter cutting and a superior finer finish..
LARGE 8″ X 82″ PRECISION-GROUND CAST IRON TABLE: For heavy-duty work..
NON-MAR FENCE INSERT: Protects table surface..
HANDWHEEL-OPERATED WORM GEAR SYSTEM: For smooth fence tilting..
PARALLELOGRAM DESIGN: Close table-to-cutterhead proximity and fast depth of cut adjustments..

Check Stock

Stant 12036 Cooling System Pressure Tester Threaded 'System' Adapter

Stant’s Engine Cooling System Pressure Tester adapters make it quick and easy to hook up a Stant Cooling System Pressure Tester to just about any automotive cooling system.
Many vehicles, due to manufacturer specific cooling system designs, require unique adapters to connect the vehicle’s coolant filler neck to the Coolant Pressure Tester.
The 12036 Tester System adapter allows the testing equipment to attach to the vehicle’s filler neck.
Fits many late model Audi, Porsche, and Volkswagen cars.

Check Stock

Stant 12043 Cooling System Pressure Tester Threaded 'Cap' Adapter, 1 Pack

Stant engine cooling system pressure tester adapters make it quick and easy to hook up a Stant cooling system pressure tester to just about any Automotive cooling system.
Many vehicles, due to manufacturer specific cooling system designs, require unique adapters to connect the vehicle's coolant filler neck to the coolant pressure tester.
12043 is a threaded adapter that allows the cooling system pressure tester to work on 2013 Ford escape and Fusion models as well as select Mazda vehicles.

Check Stock

OTC Tools 3183 Digital Battery Tester

OTC's Digital Battery Tester tests and analyzes 12 volt, 125-1400 CCA batteries by measuring multiple parameters within the battery to deliver fast, accurate, and reliable results.
A live voltmeter allows easy starting/charging system testing.
bright, 4 digit LED display indicates battery's good/bad status, voltage, and available CCAs.
Utilizes cost effective conductance test technology for accurate testing, at a value price point, that delivers quick, 1-second, initial results.
This versatile tool detects and identifies loose leads, detects bad cells, compensates for cold temperatures, and includes a surface charge warning.
Measures multiple international units: CCA, IEC, DIN, BCI, and EN and comes complete with a soft sided carrying case to keep the tool protected when not in use.

Check Stock