ReviewsGrounding Connector For Enclosure

Coax Grounding Block, Ancable F Pin Female Coaxial Ground Block for Coaxial Cable, Satellite, Dish Network, Cable Box and OTA Antenna Installation

  • Easy to Use and Install. 2 screws are included(They are individually wrapped in a small plastic bag to prevent the grounding block from scratching), connect the grounding block female to other male F-pin coax connector..
  • No Signal Loss, 3 GHz, high grade brass and gold center conductor, UV resistant rubber grommets, and a high quality alloy body, all designed for high frequency and strong signal..
  • Wide Range of Applications, Cable tv grounding block intended to ground incoming F-pin cables to your TV, RV, VCR, cable box, cable modem, off-air antenna, HD antenna, and many more devices..
  • Long-lasting to Use, The weather boots on the connections are easily and non-destructibly removable by simply rotating them off the female F-connectors..
  • 100% GUARANTEE, all Ancable products come with 12 months warranty, you are protected with our 100% No Questions Asked Guarantee for either a replacement or refund.We care about only putting out high quality products that satisfy your needs..
Check Stock

ClipperCreek 40 Amps, Level 2, 240 Volts, HCS-D50P Dual EV Charger NEMA 14-50 Plug, Up to 38 Miles per Hour of Charge, 25 Foot Cables, Indoor/Outdoor Use, Compatible with All EVs, Made in USA

  • UL FULL TESTED and SAFETY CERTIFIED: ClipperCreek's safety certifications include ENERGY STAR, ETL and cETL and demonstrate that this product has met the requirements of widely accepted product safety standards for EV charging stations. In addition, the service ground monitor constantly checks for proper grounding to ensure safety for you and your family. The charger is enclosed in a fully sealed NEMA-4 enclosure and is rated to work in temperature range of -22°F to 122°F (-30°C to 50°C)..
  • CONVENIENT: Compact size and 25 feet of charging cable for flexible installation and usability. Keep your charging cord neatly stowed with ClipperCreek’s integrated cable wrap and free wall-mount J1772 connector holster. Plus, the connector accommodates a specially sized padlock (lock included for free) that prevents misuse of your charger..
  • FAST CHARGING SPEED: The HCS-D50P high-powered, Level 2 EV Charging Station EVSE charges your car multiple times faster than the cordset that came with your electric vehicle. It is a plug-type car charger and works indoors or outdoors with ALL electric cars. 1 hour of charging delivers 38 miles of range for most cars (differs from car to car and on charge settings)..
  • PLUG AND PLAY and works with all EVs: The charg....
Check Stock

Ronybuy 10x Markers Wire Plug - 2 Wire Pigtail for Sealed Side Marker Tail Trailer Clearance Lights, 6" Long 2 Prong, Marker Lights Wiring Plug Fit 2" 2.5" Side Markers

  • 【Description】Pack of 10pcs of 2 prong male pigtails wire plugs, they can be used to replace the OE plug of tail/trailer/clearance/marker lights..
  • 【Specification】The plug harness connector is 2-Pin and 90°design, 6" long to connect with your lights easily. White is ground and black is positive. A #10 ring terminal of white wire is for easy grounding..
  • 【Application】Fits 2" and 2.5" side markers and clearance lights, or any clearance or side marker lights that require a 2 prong male plug, or a replacement for any other devices that require a PL-10 2-Pin plug. Fits most trucks & trailers, and more..
  • 【Easy Installation】Simply connect the 2 pins to the terminal before grounding the ring terminal to the chassis and connecting to a power source. Please note the connector plugs should work with round rubber grommets..
  • 【Warranty】2-Year Warranty, 45 days money back guarantee. The trailer light Harness wire is DOT Certified and Meets SAE requirements..
Check Stock

EATON 7738LA-BOX Wiring Night Switch, 120 Vac, 1 W, 15 A, 1 Poles, Led, 50000 Hr, Thermoplastic, Light, Almond

  • Nightlight Is Controlled By A Photo Sensor That Turns On In The Dark, Off In Light.
  • Easily Disable Photo Sensor For Hi/Med/Low/Off Settings.
  • Automatic Grounding System Eliminates Need For Bonding Jumper In Grounded Metal Enclosure.
Check Stock

Eaton TR7740GY-BOX Combination Usb Charger with Tamper Resistant 15A 125V Receptacle, Gray,

  • Standard AC receptacle with two USB charging ports for conveniently charging most electronic components.
  • Dual USB charging ports charge most compatible electronic devices that charge via a 5V power Adapter.
  • Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure.
  • Thermoplastic top and back-body are virtually unbreakable to deliver years of durable performance.
  • Steel mounting strap is zinc-plated for added corrosion resistance.
Check Stock

Eaton TRUSBC20W-BOX USB-C Charger with Duplex Receptacle, White

  • USB-C duplex receptacle offers fast, convenient and efficient charging of Type C devices.
  • Reversible ports allow for consistent charging regardless of plug-in orientation.
  • Tamper resistant shutters provide compliance with 2014 NEC Article 406. 12.
  • Convenient patented built-in wire strippers allow for fast installation.
  • Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure, provides redundant measure of ground continuity where jumper is used.
Check Stock

Eaton TRUSBC15W-BOX USB-C Charger with Duplex Receptacle, White

  • USB-C duplex receptacle offers fast, convenient and efficient charging of Type C devices.
  • Reversible ports allow for consistent charging regardless of plug-in orientation.
  • Tamper resistant shutters provide compliance with 2014 NEC Article 406. 12.
  • Convenient patented built-in wire strippers allow for fast installation.
  • Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure, provides redundant measure of ground continuity where jumper is used.
Check Stock

Eaton TRUSBC20GY-BOX USB-C Charger with Duplex Receptacle, Gray

  • USB-C duplex receptacle offers fast, convenient and efficient charging of Type C devices.
  • Reversible ports allow for consistent charging regardless of plug-in orientation.
  • Tamper resistant shutters provide compliance with 2014 NEC Article 406. 12.
  • Convenient patented built-in wire strippers allow for fast installation.
  • Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure, provides redundant measure of ground continuity where jumper is used.
Check Stock

Eaton TRUSBC15BK-BOX USB-C Charger with Duplex Receptacle, Black

  • USB-C duplex receptacle offers fast, convenient and efficient charging of Type C devices.
  • Reversible ports allow for consistent charging regardless of plug-in orientation.
  • Tamper resistant shutters provide compliance with 2014 NEC Article 406. 12.
  • Convenient patented built-in wire strippers allow for fast installation.
  • Automatic grounding system eliminates need for bonding jumper in grounded metal enclosure, provides redundant measure of ground continuity where jumper is used.
Check Stock

StarTech.com 19" 24U Server Rack Cabinet - 4-Post Adjustable Depth 2 to 30" Network Equipment Rack Enclosure w/Casters/Cable Management/1U Shelf/Locking Doors and Side Panels (RK2433BKM)

  • SECURE RACK: 19" server rack cabinet w/adjustable mounting depth up to 30", internal depth of 33", height 46.1".
  • FULLY ASSEMBLED WITH CASTERS: Pre-built w/casters & leveling feet to offer maneuverability & stability.
  • 100 Cage nuts/screws, hook & loop tape & 1U shelf provided to easily mount equipment.
  • DESIGN AND VENTILATION: Strong mesh doors and side panels with vented top allow for airflow.
  • 1U height intervals marked for identification.
  • COMPATIBILITY: EIA/ECA-310-E Compliant for server/networking equipment, supporting brands like HPE ProLiant, Dell PowerEdge, and Lenovo ThinkSystem.
  • Specs: 24U 19in Enclosure Cabinet | Mounting Depth 2 to 30in. | 995 lb stationary capacity| 100xM6 cage nuts & screws | 1U vented shelf | 10ft hook and loop tape inc. | Grounding lugs.
Check Stock

TAPDRA Arcade Console Board Machine Harness Wiring Cable (28/56 Pin Jamma Harness Wire)

  • This harness is ideal for replacing old harness in any old JAMMA cabinet or for customers who are bulding new machines with JAMMA boards..
  • This is Brand new Jamma Harness with 2x28pins 56 Pin connector that can be used for standard Jamma Arcade cabinet (Machines) and PCBs..
  • All wiring uses 22AWG (22AWG is enough for Jamma PCB ) ,Cheaper harnesses will only use 24AWG or 26AWG or even (Marked with 22AWG but actually with 24 or 26 AWG quality ).
  • Video signals connect through included standard monitor connector..
  • Full Grounding Loop for all those joystick/button micro-switches on your control panel.Easy to follow installation with below pinout sheet !.
Check Stock