ReviewsGuitar Pedals

9V DC 1.7A 1700mA Center Negative Regulated Power Supply Adapter with Noise Reduction Filtering for 9 volt Guitar Effects Pedals + 5 Way Daisy Chain

  • [HIGHEST POWERED REGULATED 9V GUITAR PEDAL POWER SUPPLY AVAILABLE] - 9V DC, 1700mA 1.7A regulated output. Truly the highest powered 9V power supply on....
  • [FITS INDUSTRY STANDARD GUITAR PEDALS] - tip/center-negative, 5.5 mm O.D, 2.1 mm I.D., 9.5 mm L barrel connector. Whether you need power for a....
  • [EXTENDED LENGTH CABLE] - 6.5 foot 22 AWG cable. No more extension cords and messy stages. One 9V 1700mA power supply with 6.5' length will work for....
  • [POWER MULTIPLE PEDALS] - with the optional 5 way daisy chain power supply you can safely and quietly power up to 5 of your favorite 9v pedals at....
  • [ULTRA LOW NOISE] - ferrite magnetic ring significantly reduces noise caused by facility power constraints. Coda Music Technologies guitar pedal power....
Check Stock

9V 1500mA Power Adapter for Donner DPA-1 Guitar Pedal Supply Tip Negative with 5 Way Daisy Chain Cables

  • Input: worldwide 100-240 VAC 50/60Hz, output: 9volt 1.5amp, MaxRated Power: 13.5 Watts, DC Plug Size:5.5×2.1mm Inner Negative(-). No interference & noise, 6.6ft Long cord,.
  • For Guitar Pedals - Our 5 way pedal power supply adapter for use with electric guitar multiple effect pedals. Package includes one 9v power adapter and 5 way daisy chain cord. Splitter - High quality copper core daisy chain cable. The professional noise isolation performance ensures you a quiet pedal chain condition while play..
  • 5 WAY - 5 way power chain cables are specially designed for guitar players who want to power several pedals at the same time with only one adaptor or outlet from power supply..
  • Fit for stompboxes and negative tip keyboards/electronics that have the same voltage requirements. It is compatible with most effects pedals models from BOSS, Behringer, DigiTech, Jim Dunlop, MXR, Nobels, NUX, Roland, TC Electronic, Xotic, and Zoom. Note: It is NOT compatible with Casio CTK-5000..
  • Stably safely Continuously input and output for your device. Please make sure the parameter is compatible with your devices If you have any problem after receive this item, please don't hesitate to contact us, we will try our best to resolve all issues,provide you with all after-sales service....
Check Stock

Donner Pedalboard Pedal Tape，Guitar Pedal Board Mounting Tape Length 2M Width 5CM Hook + Loop

  • SIZE：The Pedal board Trap Length 2m (78”),Width 50mm(2”).
  • STRONG ADHESIVE ABILITY：The back glue is made of strong adhesive ability glue.Strong adhesive ability to keep your guitar pedals on your pedalboard....
  • LASTING STICKINESS：You never have to worry about your pedals falling off or the tap adhesive melting off..
  • SIMPLY DIY：Simply cut to the length of your pedals, adhere to the back, and mount to your pedal board..
  • NOT EASY TO REMAIN：It’s not easy to remove any residue from the guitar effect, so you can protect your effect..
Check Stock

Pigtone 1 to 3 Way Daisy Chain Cable Guitar Effect Pedal Power Supply Splitter Cable Adapter Power Cable Black

  • This adapter is designed to work with the Monoprice guitar effects pedals, the Monoprice 9V AC power adapter, the Monoprice 18V AC power adapter, and all standard guitar effects pedals and power supplies on the market..
  • It features a single female DC connector on one end and eight male DC connectors at intervals of about 13.5"..
  • It uses the standard 5.5mm barrel and 2.1mm pin diameters used by all standard pedals and pedal power adapters..
Check Stock

Amazon Basics 1/4 Inch Guitar Patch Cable - 6 Inch

  • works with all effects pedals, including guitar and bass pedals.
  • 1/4-inch right-angle-to-right-angle connectors allow for close placement of pedal effects on pedalboards.
  • Oxygen-free copper (OFC) spiral shield and conductive PVC shield to block interference from outside sources.
  • Full metal casing ensures reliable strength and durable long-lasting performance.
  • Backed by an Amazon Basics 1-Year Limited Warranty.
Check Stock

ITHWIU-Pedalboard Tape, Guitar Pedal Board Adhesive Tape Length 2M Width 5CM with Hook and Loop

  • 【SIZE】：The Pedal board Trap Total Length 78.7” ( 2M ), Width 2” ( 50MM ), 1 Packs ( 2 Rolls Tape ) you can get once you buy it..
  • 【STRONG ADHESIVE ABILITY】：The back glue is made of strong adhesive ability glue.Strong adhesive ability to keep your guitar pedals on your pedalboard where they belong !.
  • 【SIMPLY DIY】：Simply cut to the length of your pedals, adhere to the back, and mount to your pedal board..
  • 【LASTING STICKINESS】：You never have to worry about your pedals falling off or the tap adhesive melting off..
  • 【NOT EASY TO REMAIN】：It’s not easy to remove any residue from the guitar effect, so it can protect your pedal board well..
Check Stock

Guitar Patch Cables - MIMIDI 6 Inch Flat Pancake Connectors, TS 1/4 inch 99.99% OFC Instrument Low Profile Patch Cables for Guitar Pedals

  • Save Space - Low-profile guitar pedal cable is designed specifically for connecting effects pedals.this very compact size and flexible pedal cables ensure effective use of all space on your pedalboard..
  • Flat Pancake Design Right Angle Plug - This guitar pedal patch cables with Right-angle 1/4" Silver TS nickel plated plugs,Pancake ends can be simply plug into guitar pedal, fit tight and complete.
  • Solid,stable, Antioxidant, rustproof for extremely long life and bring out the true tone of your instrument..
  • Professional Pedal Patch Cables - Made of Oxygen Free Copper (OFC), 99.99% ultra-pure OFC ensure higher levels of signal transparency & quality,clear accuratetransparent tone.Low capacitance of the will always faithfully bring out the true tone of your instrument..
  • Noiseless Guitar Patch Cable - Double-shielded Design,Colored Soft Stretchy PVC Outjacket + Spiral Winding 56/.12 CCS Copper for offering very low resistance,less energy absorbed, less noise interference. Ultra High Density Spiral Shield assures only the intended signal is received. PVC jacket with good flex-life, waterproof and temperature resistant, great flat guitar patch cable for live performance.
  • 6 Inch Instrument Patch Cable- pedal board connectors for guitar pedals, also used for other ....
Check Stock

MXR M107 Phase 100 Guitar Phaser Effects Pedal Bundle with 2 Patch Cables

  • Similar to the Phase 90, produces a broader range of sounds.
  • Four-position rotary switch selects four preset waveforms.
  • Great for guitar, bass, keys & vocals and Spacey, psychedelic ambience for guitar solos or chords!.
  • This big brother of the Phase 90 offers an even broader range of sounds.
  • Along with the speed control there is a 4-position rotary switch that selects between four different intensities, defined as preset waveform patterns guitar pedal guitar pedals pedal guitar pedal for guitar guitar multi effects unit.
Check Stock

JOYO Analog Delay Effect Pedal R Series Vintage Warm Natural Sound for Sentimental Electric Guitar Solo (Nasscar R-10)

  • JOYO Nascar effect pedal is an analog delay pedal inspired by the classic BBD, delivering warm and natural classic tone, appeals to all guitarists who love vintage sounds, perfect for sentimental guitar solo..
  • R series effect pedals deliver way more comprehensive tones and functions compared with other pedals, with True Bypass provide transparent tone to keep the best tone quality..
  • Whole new appearance and the iconic ambience lights bring out futuristic and retro styles, displaying a perfect fusion, will make our soul happy whether are jamming in the bedroom, studio or on the stage..
  • JOYO is over decade of brand reputation, provide worry-free after-sale service. with the most popular budget pedals, amplifiers, wireless systems, controllers, metronomes, tuners winning the love of global guitarists and inspiring people's music dreams..
  • Before playing, please make sure the guitar is fully connected with the pedal. in order to make JOYO pedals work properly and avoiding unexpected noise, we recommend you to purchase an extra JOYO original power adapter, or choose the other reliable brands and make sure it meets the working current requirement of single pedal..
Check Stock

JOYO Tremolo Effect Pedal Tube Circuitry of Beloved Classic Tube Amplifiers for Electric Guitar Effect - True Bypass JF-09

  • JOYO Tremolo guitar effect pedal, is the tremolo of the beloved classic tube amplifiers--using the same photoelectric tube circuitry as the trem in....
  • Excellent tone electric guitar effect pedal with true bypass provide transparent tone,minimize the tone loss to keep the best tone quality. Whole....
  • Before you test the pedal or before playing, make sure the guitar is fully connected with the pedal. In order to make JOYO pedals work properly,....
  • In addition to the existing JF/Ironman/R series of effect pedals, we will improve and upgrade our products, based on the extensive and constructive....
  • JOYO Technology Co.,LTD which established at 2006, it's over decade of brand reputation, with own electroacoustic core technology and a much more....
Check Stock

CNZ Audio PedalPad Case 5 - Guitar Effects Pedalboard for 5 Mini Pedals + Power Supply & Cables

  • The CNZ Audio PedalPad Case 5 is an Aluminum Travel Case that protects 5 Mini (1.5 x 3.75 inch) Guitar Effects Pedals as you transport them from gig to gig. The case has a polycarbonate base with hard foam supports to hold the pedals in place. As the case opens, the lid can be removed completely at the hinge and the base can be used as your pedalboard while you play. Just slide the hinge back on and secure the latches and you are ready to go..
  • 5 Power Supply Connectors are located at the top of each pedal location to connect to the pedal and supply the required 9VDC. The cables are long enough to pull out to make the connection and then slide the excess cable back under the base. Any Mini Pedals that have a side power port can be used by the user cutting the foam on the side of the case next to the power port. The case is set up now for top mount power connections..
  • A 9VDC Wall Mount Power Adapter is supplied with the PedalPad Case to bring power from a 120 VAC wall outlet..
  • The Case is constructed with a sturdy aluminum frame and hard plastic sides with a super cool CNZ Audio logo Lazer Etched into the sides. The case will keep your pedals safely stored inside along with your cables. Simply place the case on the floor, open the cover, plug in your powe....
Check Stock