ReviewsGunsmith 5

Ade Advanced Optics Delta RD3-012 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD MOD.2,XDm,XDS,XDE Hellcat Non-OSP Pistol

  • Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.3"/3.8" Single Stack, XD(M),....
  • While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional....
  • Delta RD3-012 Red dot. Top load System, no need to Remove the sight to change the Battery. 6 MOA dot. Come with Protected Cover, Adjustment wrench,....
  • 1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A windage and elevation....
  • Two button adjustments. One UP ARROW and one down ARROW to adjust brightness. Press and hold Up Arrow for 3 secs to power on, and hold Down Arrow for....
Check Stock

Ade Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight + Optic Mounting Plate for Springfield XD MOD.2,XDm,XDS,XDE Hellcat Non-OSP Pistol

  • Comes with a Picaitnny mount. Also comes with ADE all new designed adapter mount for Springfield XD, XDE 3.8XD MOD.2, XD3.3"/3.8" Single Stack, XD(M),....
  • While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith. Please note. Unprofessional....
  • Bertrillium RD3-013 Red Dot. New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632....
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every....
  • Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo. Promotes rapid target acquisition while providing a....
Check Stock

Instructions for Armourers: Rifles No. 1, No.2 and No. 3 (Pattern 14) (Lee-Enfield)

  • Works for both Lee-Enfield No.4 rifles and No.5 (Jungle Carbines)..
  • NOTE: does NOT fit any other Lee-Enfield models such as SMLE and No.1.
  • Features the unique all steel NDT side mount base and rock-solid 3-bolt mounting system. The ultra-low profile picatinny rail allows you to mount the scope as low as possible to the barrel and provides the option to keep the original iron sight as the backup.
  • No permanent modification to your Lee-Enfield.
  • No Gunsmith required, easy Installation in 20 minutes.
  • Compatible with all safety bolts including the "kicked leg" type.
Check Stock

Estwing DH-18N 18 Oz No-Mar Deadhead Rubber Mallet, Wood Handle , Gray

  • ⚒️ Quality Material of Small Mallet Hammer: This gunsmith hammer plastic head is made of stainless steel handle and one high quality rubber head and a plastic hammer head on other side. This carpenter hammer is perfect tool for delicate crafts..
  • ⚒️ Wide Application of Adjustable Hammer: The soft hammer is delicate for glass and tiles but also strong and durable. You can replace heads of rubber mallet hammer non mark for interior decoration, jewelry, handicrafts, furniture assembly, wood floor installation, and as tile hammer..
  • ⚒️ Replaceable Double Faced Hammer: This small hammers for crafts have double sided small heads with excellent wear resistance and elasticity. The soft rubber mallet will not damage the surfaces when vinyl mallet is hit, provide effective protecting on tile surface..
  • ⚒️ Size and Package Included: In the pack you will get 1 rubber hammer mallet which is elegant design and ergonomic handle design. The plastic and nylon hammer heads can be removed. This rubber mallet small minature hammer has length of 9.44 inches and 2.40 inches width..
  • ⚒️ Elegant Design of Mini Hammers for Crafts: Our gunsmith mallet sledge hammer plastic head comes with elegant design have easy grip ergonomic rubber handle which is soft for you ....
Check Stock

ADE RD3-006x Green Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS, Non-Aftermarket Slide) Standard Models, Canik TP9SF and Taurus GX4, G3C & G3 with Factory Steel Sights Pistol

  • ...its Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture.
  • 4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

9 Pieces Roll Pin Punch Set and 4 Pieces Hollow End Starter Punch Tool with Carry Case for repairing or servicing equipment, machines, and vehicles

  • ★9 pieces roll pin punch set is made of highly quality hardened 40# steel, drop forged, heat treated & knurled steel for extreme durability, workability, 4 pieces starter punch tool is made of highly quality stainless steel.
  • ★9pcs roll pin punch set including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”size, perfect tool for gunsmith, jewelers, watchmakers building, engineers, carpenters - use on guns, machinery, vehicles, woodwork and crafts, excellent tool for adding into your armorers wrench package.
  • ★4 pcs hollow end starter punch set including 1/8”, 5/32”, 3/16”, 7/32”,will cover all of the AR platform including trigger guard, gas block, and forward assist.
  • ★Hollow end roll pin punch set helps to prevent damage caused by an accidental slip off while getting the pin started.
  • ★This 9pcs roll pin punch set and 4pcs hollow end starter punch set come with red carrying bag, easy to use, carry, storage or hang this tool set.New set could be replaced if you have any problems.
Check Stock

Xage 9 Pieces Roll Pin Punch Set – Tool Kit for Jewelers/Gunsmith/Watch Makers/Repairs and Crafts with 1 Double faced mallet

  • ★High quality: This roll pin punch set is made of highly quality hardened 40# steel, drop forged, heat treated & knurled steel for extreme durability, workability.
  • ★Full set roll pin punch: 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”punch size, this roll pin punch set kit is perfect tool for gunsmith, jewelers, watchmakers, engineers, carpenters – use on Guns, Machinery, Vehicles, Woodwork and Crafts, a great help of ar15 tools.
  • ★Great grip: The knurled handles are deeply cut and let you get a good grip on it while striking with a hammer.
  • ★Safe hemispherical recessed roll pins: Hemispherical recessed tips to cradle the roll pin, so it won’t cause scratches or damage to your firearm.
  • ★Double-faced soft mallet: The double-faced design of the hammer consists of a yellow polyurethane rubber head for a cushioned strike and black oil-resistant rubber head for an oil surface(Missing Parts will Be Replaced, Just Contact Us).
Check Stock

Real Avid Punch Set, Gunsmithing Tool Kit with Roll Pin Punch Set, Flat Tip Metal Punch Set, Brass Punch Set and Gunsmithing Tools: Pin Starter Tool, Finishing Non Marring Punch and Staking Punch Tool

  • GUNSMITHING TOOL KIT: all-inclusive, 37-piece gunsmith punch set, essential armorers tool kit for firearms disassembly, gun repair and for custom DIY builds.
  • COMPLETE PUNCH SET: array of standard, flat tip metal punch selection.
  • premium quality soft brass punches and a set of auxiliary gun smithing tools to remove and install common pins.
  • FLAT TIP PUNCHES: standard steel punches to remove and install solid pins for gun repair. INCLUDED: 1/16, 5/64, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32.
  • ROLL PIN PUNCHES: feature round, half-ball tips for driving hollow pins, tension pins and spring pins, without the risk of causing damage. INCLUDED: 1/16, 5/64, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32.
  • PREMIUM BRASS PUNCHES: softer than traditional steel punches.
  • allow to deliver more controlled taps, minimizing the risk of damage to valuable firearms. INCLUDED: 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 9/32.
Check Stock

Ultimate Rifle Build Front Sight Adjustment Tool - 4 & 5 Prong with Steel Construction for Adjusting A1 and A2 Types, Use on Iron Sights - Gunsmithing Tools

  • Featuring a slim design, our front sight tool is the optimal length for ease of use on gun sights..
  • This handy sight adjuster tool provides elevation adjustment for A1 & A2 4 and 5-prong front sights..
  • A patterned surface with grip means you can easily grab these gunsmith tools when you need them..
  • Our one-piece, precision engineered sight adjuster part has a rugged steel construction with a black finish..
  • Surprise the gun lovers and enthusiasts in your life with this front sight adjustment tool as gifts for dad, brother, husband, or friend..
Check Stock

ADE Red Dot Mounting Plate for Glock, Taurus GX4,G3C,G3 with Factory Steel Sight for Vortex Venom/Viper,Buris Fastfire

  • ...fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury..
Check Stock

WHLLING 21 Pcs Gunsmith Hammer and Punch Set, Roll Pin Punch Set with Brass Punch Steel Punch and Steel Hammer In Storage Case for Gunsmithing

  • ➤Multipurpose: WHLLING Hammer and Punch Set contain every gunsmithing tool you need to assemble and disassemble your firearm.
  • also used in machinery, vehicles, wood products and crafts.
  • ➤Durable& Sturdy: The roll pin punch set all made of high-quality material--- brass, steel and plastic, with upgraded and reinforcement processed design, more sturdy and durable.
  • ➤Hammer and Punch Supplies Includes: 1/8", 9/64", 5/32" steel punches, 3/16", 7/32", 1/4", 9/32" and 5/16" brass punches, 15/64", 3/8" plastic punches, 1/16”, 5/64”, 3/32”, 1/8”roll pin starter punch, 2pcs 1/16", 2pcs 3/32" steel roll pin punch, a hammer and 2 replaceable hammer heads.
  • ➤Double Face Hammer: Brass and stainless steel hammer head can ensure the use of solid and no scratches, we also have two replacement plastic/nylon hammerhead to meet different meets.
  • ➤EDC Gunsmith's Tool Kit: The black box is made according to the size of the punch, Keeps everything neatly organized.
Check Stock