ReviewsGutter End Caps

Panacea 89014 Garden S Hook, Black, 12-Inch, Pack of 2

  • Panacea Garden “S” Hook Black 12in Hang bird feeder, hanging basket or wind chimes on one end, hook the other over gutter, small branch or trellis.
  • One end of this hook hangs on a small branch, trellis, or gutter, while the other holds your bird feeder, hanging basket, or wind chimes.
  • The steel construction creates a sturdy hook, and the black powder coated finish will last for several seasons.
Check Stock

STYDDI Pressure Washer Gutter Cleaner Rod, Heavy Duty 35 Inch Power Washer Replacement Lance Wand for Gutter Cleaning, RV Roof and Wheel Washing, 4500 PSI, 1/4 inch Quick Connector

  • STAYING GROUNDED, EASY RAIN GUTTER CLEANING WITH YOUR PRESSURE WASHER! This Rain Gutter Cleaning Tool consists of an angled wand and an extension wand, turns any pressure washer into an easy-to-use gutter cleaner! Simply attach the curved wand to extension telescopic wand for tall buildings. Flow all debris out without having to climb on the roof and risk falling off!.
  • U-SHAPED GUTTER ROD + EXTENSTION WAND FOR MORE EFFICIENT CONTROL. Extended wand length up to 35 inch/88 cm makes using your pressure washer more efficiently with more control and greater comfort. With the handy cleaning attachment, you can get hard-to-reach areas without having to use any ladders or crawling, great for rain gutter cleaning..
  • CURVED WANDS WITH M22 MALE THREAD ENDS FOR FREELY DIY & EASY OPERATION. The angled Gutter cleaning wands have M22 male thread end, which could be directly connected to most telescoping wand with M22 connector. If you need much longer length of wands, the U-shaped gutter rod can be DIY and assembled separately with your other telescoping wands as your need. Easy to operate, install and disassemble..
Check Stock

Quick Screw Gutter Hangers 5 Inch- 50 Pack - 5 Inch Gutter Clips with Bonus 6 Inch Drill Bit - Hidden Bracket Clips with Pre-Assembled Screw - Fix Sagging Rain Gutters

  • 5" QUICK SCREW GUTTER HANGER - These hidden hangers for gutters are designed to increase tension on new and existing gutters. Quick screw bracket comes pre-assembled with a large #12 screw with Type 17 point thread. Fits all 5-inch aluminum (non-plastic) gutters..
  • FIX SAGGING GUTTERS & LOW SPOTS - Use our 5 inch gutter clips to repair low spots and un-sag long stretches of gutter. Solve the problem of streams of water getting backed up and pouring over the gutter's edge. Reinforce existing gutters to withstand heavy snow..
  • HEAVY DUTY, LOW PROFILE DESIGN - The gutter hangers are engineered with a screw retention dimple that facilitates positive thread engagement, less slipping, firm seating of the screw, no over-torque, and no stripping of the screw head. Remains hidden below the lip..
  • EASY INSTALLATION W/ NUT DRIVER - Install the 5 inch gutter brackets using a 1/4" nut driver and cordless drill. Split-less clip means no snagging and faster installation into the rafter end. Total penetration depth is 1-3/8". Ideal for straight or angled fascia boards..
  • INCLUDES BONUS 6" YONICO DRILL BIT - Includes a bonus 6" YONICO drill bit for additional clearance and easier installation. YONICO is the same trusted brand carried by big box stores across the country. The....
Check Stock

Quick Screw 6 Inch Gutter Hangers - 25 Pack - Gutter Brackets 6 Inch with Bonus 6 Inch Drill Bit - Hidden Bracket Clips with Pre-Assembled Screw - Fix Sagging Rain Gutters

  • 6" QUICK SCREW GUTTER HANGER - These hidden hangers for gutters are designed to increase tension on new and existing gutters. Quick screw bracket comes pre-assembled with a large #12 screw with Type 17 point thread. Fits all 6-inch aluminum (non-plastic) gutters..
  • FIX SAGGING GUTTERS & LOW SPOTS - Use our 6 inch gutter hangers to repair low spots and un-sag long stretches of gutter. Solve the problem of streams of water getting backed up and pouring over the gutter's edge. Reinforce existing gutters to withstand heavy snow..
  • HEAVY DUTY, LOW PROFILE DESIGN - The gutter hangers are engineered with a screw retention dimple that facilitates positive thread engagement, less slipping, firm seating of the screw, no over-torque, and no stripping of the screw head. Remains hidden below the lip..
  • EASY INSTALLATION W/ NUT DRIVER - Install the 6 inch gutter brackets using a 1/4" nut driver and cordless drill. Split-less clip means no snagging and faster installation into the rafter end. Total penetration depth is 1-3/8". Ideal for straight or angled fascia boards..
  • INCLUDES BONUS 6" YONICO DRILL BIT - Includes a bonus 6" YONICO drill bit for additional clearance and easier installation. YONICO is the same trusted brand carried by big box stores across the country. T....
Check Stock

ClosetMaid 75355 Wire Shelf End Caps, 24 Large and 60 Small, 84 Pack, White

  • Large end caps cover the large rod, 0 gauge, on the Shelf & Rod wire shelf.
  • End caps are designed to be used with ClosetMaid Shelf & Rod shelving.
  • One package contains 60 small end caps and 24 large end caps.
Check Stock

IFLYTEL Rain Gutter Downspout Extensions Flexible, Brown 2 Pack Gutter Downspout Extensions,Rain Gutter Diverter, Gutter Downspout Drain Extension, Flexible Downspout Extender from 21 to 60 Inches

  • Foundation Protection and Divert water away: The gutter downspout extensions to divert damaging rainwater away and keep your foundation dry. Gutter downspout extension can easily be extenderable from 21 Inch to 60 Inch to divert unwanted rainwater away from your home’s foundation when connected to a dowspout. Our rain gutter diverter unaffected by wind or volume of rain..
  • Split Design and Use Long Time: Our downspout extender use a split design, the interface is made of ABS injection molding, will not tear off and crack, the hose uses high-quality PE material hose, it doesn’t crease or flatten or crack. Very nice and will last a long time..
  • Free Screws and Screwdriver: Once you purchase the drain downspout extension for outsider we will give you extra free screws and screwdriver,very easy to screw on the two end pieces, attach, and maneuver through flowers or landscaping..
  • Flexible Change Of Use: Flexible gutter downspout extensions with retractable design is easy to bend and maintain the shape, while its corrugated design allows it to be buried in the ground, connected and bent to extend, suitable for the complex environment outside your home..
  • Compatible and Easy To Install: This rain gutter extensions is suitable for most residential downspouts, s....
Check Stock

HydroShield Snap Fit Gutter Guard (6in. - Carton of 16 Pieces (48 Linear Feet Per Carton))

  • Stainless Steel Mesh Screen allows water to easily pass while keeping debris out (6in. Gutter Guard has a screen size area of 5-1/2in.).
  • HydroShield Mill Finish Zip Screws sold separately (Manufacturer recommends 3 screws on each end when installed).
  • Made in the USA and backed by a 25 Year Limited Warranty.
Check Stock

MCCAULEY Gutter Cleaner PRO

  • SAFELY clean out gutters standing at ground level and use the same tool five more ways! NO LADDER, water, vacuum or blower required..
  • ALSO clean out gutters from a ladder, the same way pros do it for fewer ladder set ups: Use the scoop to pull debris with scoop toward you then turn it over to pull leaves under gutter spikes. AND clean out gutters while standing on top of the roof safely back away from the edge. AND clean off gutter screens from the ground in the “clean screen” position..
  • USE the patented scoop by itself in your hand for close work on a ladder and use it on all the poles listed below. AND use the patented coupler piece for paint brushes and cleaning tools with handles of up to 1 1/4” diameter. Clean and touch up paint on gutters or any high and hard to reach places. Fits on all the poles described below..
  • RIDGID, durable polypropylene, light weight, drop resistant two-piece scoop and pole end coupler. Lock you’re scoop in 45 degree intervals for cleaning around obstacles and hard to access areas..
  • ACCEPTS almost all poles including- All standard ACME threade....
Check Stock

MECCANIXITY Round End Caps Rubber Cover 3/16" Vinyl Screw Protector for Screw Bolt Pipe Tubing 50pcs

  • The flexible rubber end caps are widely used for screw thread protectors, bolt caps, metal, and plastic pipe tubing end cover, furniture feet end protectors, etc..
  • Vinyl end caps, is in size of : 4.5mm(3/16-inch) inner dia, white.
  • Soft, lightweight, small size, durable, and long service life.
  • Steps of installation: 1. Prepare rubber end covers with appropriate size.
  • 2. Insert the end of screws, bolts, pipes, etc..
  • Please pay attention to the selection of rubber end caps with appropriate size, especially the inner diameter.
Check Stock

Valterra A04-0151 EZ Hose Carrier - 46\

  • RV HOSE CARRIER: Fits most 3" drain hoses and fittings with the exception of one-piece 90-degree sewer fittings.
  • CONVENIENT INSTALLATION: End caps come assembled with fixed, pre-glued mounting brackets and includes self-tapping screws for easy installation.
  • VENTED END CAPS: End caps feature a vented design to prevent the buildup of moisture.
  • LOCKABLE DESIGN: End caps have a loop that allows the addition of a padlock for extra security.
  • IDEAL SIZE: Features an inside diameter of 4.45" for versatile storage options.
Check Stock

WORKPRO W017004A Bolt Cutter, Bi-Material Handle with Soft Rubber Grip, 14\

  • Product 1: Note: Cutting Locks Is Not Recommended.
  • Product 1: Drop Forged Chrome Molybdenum Steel And Powder Coated Jaws For Sure, Efficient Cutting And Long Life. Ergonomic Bi-Material Anti-Slip Grips Provide Greater Control And Comfort In Cutting.
  • Product 1: Classic Lever-Fulcrum Design And Precisely Aligned Blades Deliver Added Leverage With Less Effort.
  • Product 1: Cutting Capacity: Hrc≤42: 7/32-Inch(5Mm Maximum).
  • Product 2: Large end caps cover the large rod, 0 gauge, on the Shelf & Rod wire shelf.
  • Product 2: Small end caps are for the 4-gauge wire.
  • Product 2: End caps are designed to be used with ClosetMaid Shelf & Rod shelving.
  • Product 2: One package contains 60 small end caps and 24 large end caps.
Check Stock