ReviewsGx200 Gasoline Engines Factory

LotFancy Go Kart Clutch 3/4 Bore 10T with #40 41 420 Chain, Centrifugal Clutch Fit for Go Kart Minibike MB165 & MB200, Up to 6.5HP, 1pc Connecting Link Included

  • LotFancy Go Kart Clutch 3/4 Bore 10T with #40 41 420 Chain, Centrifugal Clutch Fit for Go Kart Minibike MB165 & MB200, Up to 6.5HP, 1pc Connecting Link Included.
  • Perfect for Go Kart Minibike Baja Mini Bike MB165 and MB200, including Baja Heat, Mini Baja and the Baja Warrior.
  • Works with 2 – 6.5hp Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200. Briggs Stratton and 2-6.5 HP with 3/4″ Shaft. Tecumseh Engines 2-6.5 HP with 3/4″ Shaft.
  • Mounts onto crankshaft using bolt and washer on the end of the crankshaft.
  • Package included: 1 x Centrifugal Clutch, 1 x #40/41/420 Chain, 1 x Clutch Bolt, 1 x Washer Kit, 1 x wrench and 1 x Connecting Link.
Check Stock

LAFORMO Centrifugal Clutch 3/4" Bore for Predator 212cc Small Engine Go Kart Mini bike Lawnmower Fun Kart Engine 3/4 Bar (10T with #40/41/420 Chain)

  • Package list: 1 x Centrifugal Clutch, 1 x #40/41/420 Chain, 2 x Screw.
  • Fits 2-7Hp 212 Predator Engines centrifugal clutch 3/4" bore 10 tooth+ #40/41/420 chain kit for go kart..
  • Fits 2 - 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200.
  • Fitment: Fits Yerf-Dog karts with Tecumseh.
  • Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones.
Check Stock

Go Kart Clutch 3/4" Bore 12T #35 Chain Centrifugal Clutch Fit For Minibike 6.5HP Engine Honda GX160 GC190 GX200

  • 3/4" Bore 12 Tooth Centrifugal Clutch for 4 Feet 35 Chain Common clutch for 2-7 HP engines Engagement Speed 2300±300 PRM..
  • Replace For 2 - 6.5hp Honda Engines GC160, GC190, GX120, GX140, GX160, GX200. Fit Tecumseh Engines 2-6.5 HP with 3/4" Shaft. For Briggs Stratton and 2-6.5 HP with 3/4" Shaft. For Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc..
  • Made of high quality iron material, durable, sturdy, fast heat dissipation..
  • Package Included: 1 x Centrifugal Clutch + 1 x 4 Feet #35 Chain + 1 x Connecting Link + 2 x Set Screws.
  • Satisfaction Service: 1 YEAR 100% SATISFACTORY WARRANTY. If unfortunately did not work well, please kindly contact us..
Check Stock

New Centrifugal Go Kart Clutch 3/4" Bore 10 Tooth 10T for #40/41/420 Chain 6.5HP - Upgrade

  • Heavy Duty 10T Sprocket for 40/41/420 Chain 212cc Predator Belt Drive Centrifugal Clutch.
  • 3/4" Bore Designed for 2-7Hp 212 Predator Engines Clutch Performance Parts.
  • Fits 2 - 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200.
  • 3/4 inch Centrifical Clutch for Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall.
  • Fits Go Cart Motor Auto Engine Tecumseh Clutch 6.5 Horsepower Motor with 3/4" Bar Shaft and 3/16" Key Way.
Check Stock

Caltric compatible with Primary Clutch Sliding Fixed Sheave Kit Yamaha Rhino 700 YXR700F 2008-2013

  • Centrifugal Clutch 3/4” Bore 12 Tooth for 35 Chain, Common clutch for 2-6.5 HP engines 2300 RPM. The 12T clutch has a broached 3/16" keyway with two set screw holes located 90 degrees apart.
  • Our go-kart clutch is made of high-grade steel, heavy-duty and long lasting. It can withstand the strain and heat caused by friction, once the clutch engages.
  • Perfect for Go Kart, Minibike and Fun Kart. Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft.
  • Also fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Go cart clutch kit includes two set screws, but chain is not included. The two set screw holes are tapped 1/4"-28.
Check Stock

Go Kart Clutch 3/4" Bore 10T with #40 41 420 Chain for Go Kart Minibike Yerf-Dog karts with Tecumseh

  • 【General Fitment】: This go kart clutch and chain fit for Go Kart Minibike Yerf-Dog karts with Tecumseh.
  • 【Fitment】: Fit for 2- 6.5HP Small Engines HONDA GC160, GC190, GX120, GX140, GX160, GX200. And for Briggs Stratton and 2-6.5 HP with 3/4" Shaft. Tecumseh Engines 2-6.5 HP with 3/4" Shaft.
  • 【Product Detail】: 3/4" Bore 10T Sprocket with 40/41/420 Chain designed for 2-7Hp 212cc Predator engines clutch performance parts.
  • 【Attention】: 3 /4-inch centrifugal clutch for single wheel belt direct drive karts with tires No Larger Than 15" tall.
  • 【Before Purchasing】: Please check carefully up and below information about our go cart clutch 3/4 shaft fitment before your purchasing, any question, please contact us first, thank you!.
Check Stock

JYAU Exhaust with Muffler for Predator 212cc 6.5hp mini bike, Honda GX160, GX200, DuroMax 7 Hp (JYAUOT00732)

  • ... over time, you can apply high heat paint..
  • Compatible Replacement for Predator 212cc, Honda GX160, GX200, Powerhorse 208cc, DuroMax 7 Hp. This is a complete kit that includes all the necessary lock washers and nuts for a complete installation..
  • While this is not a genuine OEM part, it is a direct replacement for the factory exhaust with muffler on your Predator 212cc, Honda GX160, GX200, Powerhorse 208cc, DuroMax 7 Hp. Installation is easy with no special tools required and it will fit, look, and work like the factory exhaust with muffler..
  • NOTE - This muffler has a NPT thread, it is not possible to put it until the end, you will have 1/4 of thread outside and is a little more loud than the factory..
  • 1-Year Warranty - This exhaust with muffler comes complete with a 1-Year Warranty. If the exhaust with muffler ever fails on your Predator 212cc, Honda GX160, GX200, Powerhorse 208cc, DuroMax 7 Hp within the warranty period, simply contact us for a replacement. Save time and money by purchasing this part and taking advantage of this warranty..
Check Stock

Centrifugal Clutch 3/4' Bore 12 Tooth 35 Chain for Go Kart Mini Bike Fun Kart 2-7 HP Engine Fits for Honda GX160 GX200 GX140 GX120 GC160 GC19

  • Fits for Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Tecumseh Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4" shaft Tecumseh Engines.
  • Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Centrifugal clutch 3/4" bore 12 tooth #35 chain screw sets for go kart mini bike fun kart 2-7 HP engines 2300±300 PRM.
  • 3 /4-inch centrifugal clutch for single wheel belt direct drive karts with tires No Larger Than 15" tall.
  • Package included:1x 12 Teeth Centrifugal Clutch, 1x #35 Chain, 2 x built-in screws and 1 x Connecting Link, Easy installation, a perfect replacement part for your mini bike and go kart..
Check Stock

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 10 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 10 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
Check Stock

HZ Fuel Tank Fits Honda GX160 GX200 GX140 and Power Equipment Replaces 17510-ZE1-020ZA

  • The kit includes mounting bolt and nuts, fuel line, clips, fuel joint,carburetor gasket set,valve cover gasket.
  • Fits Honda GX140 GX160 GX200 5.5Hp 6.5Hp engines and power equipment with these engines..
  • Replaces Honda 17510-ZE1-020ZA fuel tank.
  • High quality and 1 year warranty. Full refund if any quality issue..
Check Stock

LotFancy Go Kart Clutch 3/4 Bore 12T with #35 Chain, Centrifugal Clutch Fit for Go Kart Minibike Honda Engines, With 2pcs Set Screws & 1pc Connecting link

  • 3/4" Bore 12 Tooth Centrifugal Clutch with 4 Feet #35 Chain, Common Clutch for 2-7 HP Engines, Engagement Speed 2300300 RPM.
  • Perfect for Go Kart, Minibike and Fun Kart.
  • Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4 shaft.
  • Also fits any other engines with 3/4 crank shaft and 3/16 key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Package included: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link.
Check Stock