ReviewsHammer Drill Bits Set

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • ...aws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...aws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

VonHaus 50 Piece Wall Mounted Plastic Pegboard and Shelf Tool Organizer - DIY Garage Storage Wall Mount System with Rack and 50 Assorted Hook Accessories - Tool Parts and Craft Organizer

  • HIGH PERFORMANCE – 10 amp motor delivers powerful impact energy to complete heavy duty projects on masonry, solid steel and more.
  • THREE FUNCTION MODES – choose from hammer only (chiselling-only), hammer drill (hammering and rotation), and drill only (rotation only).
  • CAPACITY –1-3/16” for concrete and 1/2” for steel and 1-9/16” for wood, no load rotation speed 0 - 850 RPM.
  • 360 DEGREE SWIVEL HANDLE – auxiliary handle with textured grip provides maximum control and comfort.
  • SET INCLUDES: Flat and point chisels, dust cover, SDS drill grease, SDS drill bits, SDS chuck & regular chuck for drill bits, depth gauge and storage....
Check Stock

GLORITY 1-1/4 Inch SDS-Plus 13 Amp Heavy Duty Rotary Hammer Drill with Aluminum Alloy Housing, Safety Clutch 4 Functions and Variable Speed, Including 5 Drill Bits, Flat Chisels, Point Chisels. RH20A

  • POWERFUL MOTOR: This rotary hammer drill is equipped with 13AMP high-power industrial motor, which can provide 7.4 joules of impact energy and can reach a maximum speed of 0-850RPM and an impact frequency of 4500BPM to complete heavy duty projects such as concrete, masonry and metal with higher efficiency. The all-copper motor is more resistant to high temperatures, and even with long working hours, it will not burn the machine.
  • 4 FUNCTIONS: Two different switches for easy switching. Hammer - applicable to concrete and brick. Drill - applicable to wood, plastic, or metal. Hammer drill - for heavy duty work. Chisel adjustment - adjusts the angle of the chisel before use to suit various work intensity requirements. The dual function switch design extends machine life compared with single function switch designs.
  • SAFETY CONTROL AND DRILLING CAPABILITY: Safety clutch device to prevent throwing hands for safer use. SDS plus high strength chuck for easy and safe drill bit changes to prevent bit dropping. 360° rotatable handle for easy response to various work requirements. With metal depth gauge provides more precise control for your work. The maximum drill diameter is 1....
Check Stock

VonHaus 1-3/16” SDS-Plus Heavy Duty Rotary Hammer Drill 10 Amp - Vibration Control, 3 Functions - With Drill Demolition Kit, Grease, Chisels, Drill Bits and Case – Suitable for Concrete, Wood, Steel

  • HIGH PERFORMANCE – 10 amp motor delivers powerful impact energy to complete heavy duty projects on masonry, solid steel and more.
  • THREE FUNCTION MODES – choose from hammer only (chiselling-only), hammer drill (hammering and rotation), and drill only (rotation only).
  • CAPACITY –1-3/16” for concrete and 1/2” for steel and 1-9/16” for wood, no load rotation speed 0 - 850 RPM.
  • 360 DEGREE SWIVEL HANDLE – auxiliary handle with textured grip provides maximum control and comfort.
  • SET INCLUDES: Flat and point chisels, dust cover, SDS drill grease, SDS drill bits, SDS chuck & regular chuck for drill bits, depth gauge and storage case. Drill weight: 9lbs.
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

ENGiNDOT Hammer Drill, 1/2-Inch 6-AMP Corded Electric Hammer Drill with 2800RPM, Variable Speed, Drill Chuck, 10 Drill Bits for Home Improvement, Concrete, Steel, Wood (NOT for Reinforced Concrete)

  • All Metal Chuck: The metal chuck is more durable and sturdy than the plastic drill chuck, with longer life time. Allowing you to change a variety of drill bits with ease. The maximum chuck diameter of this impact drill is 1/2'' (13mm)..
  • Hammer & Drill Function 2-in-1: Switch the orange button on the top to select hammer or drilling function by your tasks. Drilling function for drilling holes on steel plates, plastic and wood, hammer function provides greater impact to make the drilling task more efficient and simple on concrete wall and masonry. Please note that this drill can't be used in reinforced concrete walls..
  • Powerful Motor & Variable Speed: The ENGiNDOT PID01A Corded hammer drill equipped with high efficiency industrial copper core motor, gives more power and durability, designed with variable speed, you’re able to set a suitable speed for different applications from 0-2800rpm..
  • Lightweight & Ergonomic Design: This hammer drill for concrete has been designed with light weight of 4.5 lbs to ensure an easy operation and less fatigue for long drilling tasks. The compact design of this hammer drill e....
Check Stock

AOBEN 1-1/4 Inch SDS-Plus Rotary Hammer Drill with Vibration Control and Safety Clutch,13 Amp Heavy Duty Demolition Hammer for Concrete-Including 3 Drill Bits,Flat Chisels Point Chisels.

  • 【POWERFUL MOTOR】 AOBEN electric Rotary Hammer Drill is equipped with 13 Amp (1500W) motor that delivers powerful impact energy to complete heavy duty projects on concrete, Masonry and metal..
  • 【EASY TO OPERAT】 Three function modes can be easily switched - hammer only (chiselling-only), hammer drill (hammering and rotation), and drill only (rotation only) . There are double switch buttons to change the functions which can last longer compare with single switch button..
  • 【ERGONOMIC DESIGN】 AOBEN Roto hammer drill adopt ergonomic design with Rubber and 360 degree adjust handle provides a comfortable use feeling . SDS-plus hammer drill can guarantee the user’s safety and well designed heat dissipation motor and double anti-dust bottom structure can extend the hammer's use life..
  • 【TOOL KITS】 AOBEN hammer drill set include 3 pcs drill bits(size of 8mm,10mm and 12mm), 1 pc flat chisel, 1 pc point chisel, a dirt proof boot, motor lubricant, 2 pcs of spare carbon brush Portable Carrying Case provides the perfect storage..
  • 【MULTIFUNCTION】 AOBEN Professional rotary hammer Applies to wood,masonry,concrete and steel. Max 1-1/4 inch drilling diameter for concrete and for metal is 1/2 inch. AOBEN provide 24 months warranty service..
Check Stock

16 PCS Hex Shank Drill Bit Set, Titanium Twist Drill Bit Set, 4341 HSS Hex Shank High Speed Steel Drill Bits for Wood, Plastic, Aluminum Alloy, Steel, Metal, Quick Change (1/16”-1/4”)

  • Multipurpose drill bits set with 5 different diameter sizes: 5/32” (length 4.7” ), 3/16” (length 4.7” ), 1/4”(length 6” ), 5/16” (length 6” ), 3/8” (length 6” ). 5 pieces drill bits meet your different needs..
  • Robust high-quality tungsten carbide head provides longer life in multi-materials including brick, block, tile, fiber cement, wood, plastic and metal.
  • Multi-grind sharp edges deliver high drilling speed even in hard materials, perform 85% faster in multi material than standard bits.
  • Big "U" flute design cleans debris out fast which make it a efficient metal and wood drill bits set.
  • Hex shank allows using in impactors and hammer drill/drivers for outstanding bit grip.
Check Stock

Diablo by Freud DMARG1220-S5 5 pc SPEEDemonâ„¢ Red Granite Carbide Tipped Hammer Drill Bit Set (5-Piece)

  • Diablo made carbide tip withstands impact and high heat applications for superior life versus standard masonry hammer drill bits.
  • Multi-ground Grip Point Tip delivers stability and accuracy required for fast, precise holes. More holes per charge in cordless impact and drill drivers. Maximum performance in hammer or rotary drilling applications..
  • Hi-performance brazing and hardening process extends life of carbide tip and increases productivity. Optimized flute design removes dust faster, keeping the carbide tip cooler for ultimate strength and durability..
  • Set features 5 bits: (1) 5/32” x 4” x 6”, (1) 3/16” x 4” x 6”, (1) 1/4” x 4” x 6”, (1) 5/16” x 4” x 6”, (1) 3/8” x 4” x 6”.
Check Stock

10 Pcs Masonry Drill Bit Set with Strength Carbide Tips Glass Drilling Bits for Ceramic Tile Wood Porcelain Mirror Plastic Marble Wall, 1/8, 3/16, 1/4, 5/16, 3/8, 1/2 Inch.

  • 10 PCS DRILL BITS: measured 1x1/8”, 1x5/32”, 1x3/16”,4x1/4”,1x5/16”,1x3/8”,1x1/2”, the long drilling bits with hex shank can be firmly and stably installed on the electric drill, they’re suitable for drilling holes in ceramic tiles and mirrors..
  • SUPERIOR QUALITY: made of premium metal alloy and coated with zinc, glass drill set is rust-proof and corrosion-resistant, and the strength carbide tip of masonry drill bits for concrete is wear-resistant and durable..
  • SPECIAL CARBIDE TIP: flat designed tip of masonry drill bit is sharp and performs well in penetrating objects, and the holes drilled are round and smooth without broken edges or tremor phenomenon..
  • MULTIPLE FUNCTION: drill bit set with hex shank is widely applicable to ceramic tile, porcelain pot, marble, glass, wood and plastic, and can be used for installing mirror, towel rack and toilet paper roll in bathroom..
  • PROFESSIONAL CUSTOMER SERVICE: please do not drill hole in the hard ceramic tile.
  • please do not use our masonry drill bit set with hammer drill, if you have any questions about this hex shank glass drill kit, please feel free to contact us..
Check Stock