ReviewsHamstring Kickback

Festool 577008 TSC 55 KEBI-F-Plus-FS Cordless Track Saw w/55" Guide Rail

  • The kickback stop helps to reduce the risk of injury from kickback when sawing or plunging the tool into the workpiece.
  • Concentrated torque and up to twice as fast work progress with an increased saw blade service life.
  • Brushless EC-TEC motor combined with lithium-ion batteries for maximum cutting power.
  • Low-dust mobile working thanks to dust collection bag or an extractor with Bluetooth automatic switch-on.
  • The kickback stop can be deactivated for individual cuts.
Check Stock

Efco 10' Oregon Chain Saw Repl. Chain Model #Pole Pruner, PT-2500, PTX-2500, PT-2700, PTX-2700 (9039)

  • For chainsaws .325", .050" Gauge, 72 Drive Links (21BPX072).
  • Replacement Saw Chain needs an exact identification for each chainsaw and cannot be assumed based on the bar length or chain type..
  • LubriTec keeps your chain and guide bar oiled for less friction and longer life.
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3..
Check Stock

Oregon ControlCut Saw Chain to fit 18-Inch (45cm) Husqvarna, Hyundai, Alphina and Efco Chainsaws, 72 Drive Links

  • For chainsaws 3/8", .050" Gauge, 45 Drive Links (91PX045).
  • Replacement Saw Chain needs an exact identification for each chainsaw and cannot be assumed based on the bar length or chain type..
  • LubriTec keeps your chain and guide bar oiled for less friction and longer life.
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3..
Check Stock

SUNGATOR 3-Pack 16 Inch Chainsaw Chain SG-S56, - 3/8' LP Pitch - .050' Gauge - 56 Drive Links, Compatible with Echo, Homelite, Poulan, Remington, Greenworks

  • Pitch: 3/8" Low Profile, gauge: .050", drive link count: 64.
  • LubriTec keeps your chain and guide bar oiled for less friction and longer life.
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3..
Check Stock

Anzac MS170 Chainsaw Chain replacement for Stihl 3610 005 0055 Stihl MS170 MS171 MS180 MS180C 16 Inch Chinsaw 61PMM3 55 DL 3/8 LP Pitch .043 Gauge 3Pack

  • 16 Inch Chain Replacement for Stihl 3610 005 0055, 61PMM3 55 DL.
  • For saw sizes up to 42 cc.Designed for homeowners and landscapers..
  • Compatible with Stihl 017, 018, MS 170,MS 171,MS 180, MS 181,MS 190 T, MS 191 T, MS 192 T, MS 200, MS 200 T, MS 201, MS 201 T, MS 210, MS 211, MS 230, MS 231, MS 241, MS 250 saws & More.
  • The .043" gauge narrow kerf cutting systems increase efficiency since they need less power from the saw than standard cutting systems..
  • Note: This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012. Low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3..
  • Semi-chisel with low kickback. If you can't make sure the specs of above models , please contact us before make order..
Check Stock

BOW Products FeatherDUO FP3 Featherboard – Stackable Feather Board for Table Saws, Router and Band Saws – For Taller Material Feeds – Includes 2 UltraFLEX Feathers

  • Kickback Prevention: FeatherDUO virtually arrests kickback.EVA material combines with our living hinge design to pinch board against the fence and absorb kickback forces.5x greater kickback resistance versus plastic or wood feathers..
  • Ultimate Feed Control: EVA feathers increase the amount of surface contact on the work piece, ensuring a smoother glide and superior infeed control. Substantially reduces wiggle you get with plastic feathers..
  • Cleanest Cut: EVA Feathers absorb vibration and minimize chatter for a cleaner cut.Feathers are non-marring on even the softest woods..
  • EVA Feather Features and Safety: Feathers are reversible, replaceable, and interchangeable. FeatherDUO is versatile in that you can switch out between UltraFLEX and Standard Feathers. Feathers will not harm carbide blades or router bits in case of accidental contact. Feathers conform slightly to the wood. EVA will NOT set off Saw Stop. EVA will NOT absorb fluid as it is a closed cell material. EVA will NOT bleed color or shed material..
  • AnchorPRO Hardware: FeatherDUO uses our patented AnchorPRO miter hardware that offers fast expansion and super strong hold in the miter slot.T Bolt is used as the expansion bolt in the miter bar.Use T Bolt for T Track mounts.Comfortable Ergonomic Knobs....
Check Stock

BOW Products Portable Saw Featherboard FP5 - for us with Contractor Saws and Smaller Table Surfaces - Woodworking Safety Accessory with EVA Feathers that Reduces Kickback

  • Kickback Prevention: The portable saw featherboard virtually arrests kickback, EVA material combines with our living hinge design to pinch board against the table and absorb kickback forces, 5x greater kickback resistance versus plastic or wood feathers.
  • Ultimate Feed Control: EVA feathers increase the amount of surface contact on the work piece, ensuring a smoother glide and superior infeed control, substantially reduces wiggle you get with plastic feathers.
  • Cleanest Cut: EVA feathers absorb vibration and minimize chatter for a cleaner cut, feathers are non-marring on even the softest woods.
  • EVA Feather Features and Safety: Feathers are reversible and replaceable, feathers will not harm carbide blades or router bits in case of accidental contact, feathers conform slightly to the wood, EVA will NOT set off saw stop, EVA will NOT absorb fluid as it is a closed cell material, EVA will NOT bleed color or shed material, single knob actuation: ideal for small table surfaces.
  • Hardware: Portable saw featherboard has a 6 In. travel slot and comes with a comfortable ergonomic knob, comes with 5/8 In. and 3/4 In. miter bars, on board storage for extra miter bar, also mounts to 1/4 to 3/4 In. T-track.
Check Stock

BOW Products FeatherPRO FP1 Featherboard – for use with Table Saws, Router Tables, and Band Saws – Woodworking Safety Accessory with EVA Feathers that Reduces Kickback

  • Kickback Prevention: FeatherPRO virtually arrests kickback. EVA material combines with our living hinge design to pinch board against the fence and absorb kickback forces. 5x greater kickback resistance versus plastic or wood feathers..
  • Ultimate Feed Control: EVA feathers increase the amount of surface contact on the work piece, ensuring a smooth glide and superior infeed control. Substantially reduces wiggle you get with plastic feathers..
  • Cleanest Cut: EVA Feathers absorb vibration and minimize chatter for a cleaner cut. Feathers are non-marring on even the softest woods..
  • EVA Feathers and Safety: Feathers are reversible, replaceable, and interchangeable. FeatherPRO is versatile in that you can switch out between Standard and UltraFLEX Feathers. Feathers will NOT harm carbide blades or router bits in case of accidental contact. Feathers conform slightly to the wood. EVA will NOT set off Saw Stop. EVA will NOT absorb fluid as it is a closed cell material. EVA will NOT bleed color or shed material..
  • AnchorPRO Hardware: FeatherPRO uses our patented AnchorPRO miter hardware that offers fast expansion and super strong hold in the miter slot. T Bolt is used as the expansion bolt in the miter bar. Use T Bolt for T Track mounts. Comfortable Ergonomic Knobs..
Check Stock

Vive Thigh Brace - Hamstring Quad Wrap - Adjustable Compression Sleeve Support for Pulled Groin Muscle, Sprains, Quadricep, Tendinitis, Workouts, Sciatica Pain and Sports Recovery - Men, Women (Black)

  • EFFECTIVE THIGH SUPPORT: Providing targeted compression therapy, the thigh brace supports the hamstring and quadricep while aiding in the recovery of strains and pulls. Secured by dual velcro fasteners, the adjustable compression wrap is constructed with a latex-free, nonslip neoprene for exceptional support throughout any activity. The thigh support allows complete freedom of movement and is perfect for use in any activity, including soccer, baseball, basketball, cycling, and running..
  • RELIEVES STIFF AND SORE MUSCLES: Increasing circulation and retaining therapeutic heat, the compression support wrap relieves stiff and sore thigh muscles. Effective for groin, hamstring and quad strains and pulls, the thigh support brace promotes healing, reduces recovery time and is useful in preventing re-injury..
  • LIGHTWEIGHT, BREATHABLE NEOPRENE: Lightweight and breathable, the latex-free neoprene wicks away moisture and includes small ventilation holes for cool and comfortable wearability. The slim neoprene wrap can be worn under or over clothing..
  • VERSATILE NONSLIP FIT: Two premium elastic straps with velcro closures allow the stretchable hamstring support to be adjusted to fit thighs up to 27” in circumference. The nonslip neoprene stays in place throughout the ....
Check Stock

16' TriLink CL15056TL2 3/8 LP, .050, 56-DL Saw Chain Replaces Oregon 91PX056G, S56, Stihl 93PM1, Husqavarna H37

  • Pitch: 3/8" LP - Gauge: .050" - Drive Links: 56 - File: 5/32" - Semi-Chisel Cutters.
  • S56 fits Husqvarna, Craftsman, Poulan and additional chainsaw models.
  • Features the Centri-Lube oil distribution system to extend the life of your saw chain.
  • This saw chain met the kickback performance requirement of ANSI B175.1-2012 when tested according to the provisions of ANSI B175.1-2012 low-kickback saw chain meets the kickback performance requirement of CSA Standard Z62.3.
Check Stock

Oregon 571037 PowerSharp Replacement Saw Chain Kit for CS1500 with Onboard PowerSharp System, 18

  • Top-sharpening design allows the cutters to be sharpened in seconds on the saw, pull the PowerSharp lever on the PowerNow chainsaw for 3-5 seconds.
  • Chisel-style cutters deliver efficient cutting and excellent stay-sharp.
  • Ramped depth gauges and ramped guidance drive links deliver smooth cutting action and low-kickback performance.
  • Top-sharpening design allows the cutters to be sharpened in seconds on the saw. Pull the PowerSharp lever on the PowerNow chainsaw for 3-5 seconds.
  • The Oregon PowerNow 571037 Replacement Saw Chain, PowerSharp 18-in (includes sharpening stone) is low-kickback per ANSI B175.1 & CSA Z62.3.
Check Stock