ReviewsHand Tap And Die Set

uxcell Tap and Die and Drill Bit Set M14 x 2 Left Hand Thread Milling Tap and Round Die 12mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M14 x 2 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 12mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

uxcell Tap and Die and Drill Bit Set M12 x 1.75 Left Hand Thread Milling Tap and Round Die 10.2mm Cobalt High Speed Steel Twist Drill Bit

  • Compatibility: M12 x 1.75 metric tap and die set are suitable for making or repairing male and female threads. They are both left hand thread, durable, and with clear threads, good for general purpose applications..
  • Thread Tap: Straight flute design, downward chip removal. Process through holes in maintenance and repair work. For tapping aluminum, die steel, stainless steel, bronze, hard plastics etc.. Use with tapping oil to get higher quality threads and more durable taps..
  • Round Die: The round die features good abrasion resistance. Used with die wrench (not included). The fastening screws in the middle of the wrench should be inserted into the slot of the die and tightened. Suitable lubricating oil should be added to the cutting edge..
  • 10.2mm Drill Bit: Spiral chip space design for fast and clean chip removal. M35 cobalt high speed steel tool features high hardness (HRC65-66) and high red hardness, high wear resistance. Specially used for drilling stainless steel..
  • Tips: Recommended feed rate: general steel: 6-15m/min.
  • cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Check Stock

PTSTEL 39 PCS Tap and Die Set Metric & SAE Essential Threading Tool Kit for Cutting External and Internal Threads with Adjustable Handles Accessories and Case

  • High-quality & Durability: PTSTEL metric & SAE tap and die set is made of industrial grade GCR15 bearing steel, which is non-corrosive and durable,....
  • Efficient Cutting: All cutting teeth of the tap and die set are precisely CNC machined and accurately heat treated to a rockwell hardness 60 HRC to....
  • Wide Range of Applications: The cutting thread tool set is processed with internal thread and external thread, and strong torsional force is ideal for....
  • Easy to Storage: Each taps and dies set is equipped with plastic tool box with corresponding scales engraved. You will never get the wrong size when....
  • Most Complete Size: 17pcs metric & SAE tap and die set: SAE: 5/16-18, 3/8-16, 7/16-14, 1/2-13, NPT tap (1/8-27), #4-40, #6-32, #8-32, 1/4-20 METRIC:....
Check Stock

60 PCS Tap and Die Set Metric and Standard Sizes Included Tap Die Kit Metric and SAE for Threading and Rethreading Internal and External Threads

  • SAE & METRIC TAP & DIE SET: These 54 Orion Motor Tech taps and dies cut and clean internal and external threads in common conventional and metric sizes.
  • the set also includes adjustable tap and die wrenches, a T-handle tap wrench, a 1/8" flathead screwdriver, and a thread pitch gauge to cover all your needs.
  • USER-FRIENDLY DESIGN: Our standard and metric tap die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 5-10mm long to allow easier use with the provided wrenches.
  • WIDE APPLICATION: These threading tools work perfectly to correct or create internal and external threading through wood, copper, aluminum, iron, carbon steel, and more!.
  • CHROMIUM STEEL: The thread repair set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity.
  • BLOW-MOLDED CASE: The blow-molded case stores and organizes the tools, providing easy portability wherever you need them to thread and rethread internal and external threads.
Check Stock

SAE Tap and Die Set Standard | #4, 6, 8, 10, 12, 1/4, 5/16, 3/8, 7/16, 1/2\ Tap Set and Die Set | Thread Repair Kits for Threading and Rethreading Internal and External Threads

  • SAE TAP & DIE SET: These 34 Orion Motor Tech taps and dies cut and clean internal and external threads in common conventional sizes.
  • the set also includes a long-handled tap wrench, 2 T-handle tap wrenches, an adjustable die wrench, a 1/8" flathead screwdriver, and a thread pitch gauge to cover all your needs.
  • USER-FRIENDLY DESIGN: Our SAE tap and die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 1/5 to 2/5 in. long to allow easier use with the provided wrenches.
  • WIDE APPLICATION: These tools work perfectly to correct or create internal and external threading through wood, copper, aluminum, iron, carbon steel, and more!.
  • CHROMIUM STEEL: The whole tool set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity.
  • BLOW-MOLDED CASE: The blow-molded case stores and organizes the tools, providing easy portability wherever you need them.
Check Stock

RIDGID 44923 Model 690-I Hand-Held Power Drive Kit, Pipe Threading Machine and 1/2-Inch to 2-Inch 11-R NPT Pipe Threading Die Heads with Carrying Case for Threading Pipe

  • CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die h....
Check Stock

M25 x 1.5 Tap and Die Set RH Right Hand Machine M25 x 1.5mm Thread Tap and Round Die HSS M25x1.5 Threading Tool Thread Milling Tap

  • Package Include: 1pc Right hand Thread Tap M25 x 1.5,1pc Right hand Thread Die M25 x 1.5Threading Tool.
  • Tap : for Chip removal, high efficiency, debris rapidly discharged in the tank. No blocking, fast efficiency. Die: Not easily broken tooth chip fast and abrasion resistance and long service life..
  • Thread Type: Right Hand Thread M25 X 1.5 Cutting Tool.
  • My Note: And Perfect threading manufacturing process and good surface heattreatment..
Check Stock

Azuno 40PCS Metric Tap and Die Set Professional Hand Tapping Threading Chasing Kit for Home Garage DIY

  • 【40 Piece Tap and Die】: Set in cludes 34 taps & dies, 1 die handle, 1 T-tap wrench, 2 screw-pitch Gauge, 1 screwdriver, 1 tap wrench. Contructed....
  • 【Most Common Sizes in Metric】: 16 Dies & Taps:....
  • 【Performance and Durability】: CNC machined Tap and Dies made by industry-grade GCr15 bearing steel with pronounced hardness and balanced....
  • 【Easy for Storage】: Comes with a heavy-duty delux case, convinient for storage and carrying. It has identified slot for each piece so that to keep....
  • 【Versitile Threading Tool Set】： This professional set is perfect for cutting and renewing external and internal threads to exact standards.....
Check Stock

Segomo Tools 110 Piece Hardened Alloy Steel Metric Tap And Die Threading Tool Set With Storage Case | Metric Tap and Die Set | Rethreading Kit | Tap Set | Tap and Die Kit - TD110MM

  • [ Excellent Performance ] This tap and die set is ideal for cutting and renewing external and internal threads on most metals to exact standards. The tapered teeth of these threading tools are specially designed to start threading easily and smoothly and prevent overthreading..
  • [ Durable Design & Easy Storage ] Our tap and die sets are constructed from hardened alloy steel for maximum strength and durability. They also come in heavy-duty plastic blow-molded carrying case for easy transport, safe storage & quick organization..
  • [ Handy Accessories] This large tap and die set comes also with two tap wrenches : M3-M12, M6-M20, two die wrenches : 25mm, 38mm O/D and one T-Type tap wrench : M3-M6..
  • Metric Tap Sizes: 2x0.4 , 3x0.5 , 4x0.7 , 5x0.8 , 6x0.75 , 6x1 , 7x0.75 , 7x1 , 8x0.75 , 8x1 , 8x1.25 , 9x0.75 , 9x1 , 9x1.25 , 10x0.75 , 10x1 , 10x1.25 , 10x1.5 , 11x0.75 , 11x1 , 11x1.25 , 11x1.5 , 12x0.75 , 12x1 , 12x1.25 , 12x1.5 , 12x1.75 , 14x1 , 14x1.25 , 14x1.5 , 14x2 (x2), 16x1 , 16x1.5 , 16x2 , 18x1.5 ..
  • Metric Die Sizes: 2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x0.75, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x....
Check Stock

5/8-11 Tap And Die Set, UNC Right Hand Machine Tap and Round Die (5/8-11 UNC)

  • 【Round Die】: Not easily broken tooth chip fast, abrasion resistance and long service life..
  • 【Tap】 : debris rapidly discharged in the tank. No blocking, fast efficiency and high efficiency.
  • 【Characteristics】 : Heat treated and tempered for file hard threads and a long, useful life.
  • 【You will Get】 : 1x 5/8-11 TAP & 5/8-11 DIE.
Check Stock

LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK

  • LATHE TAILSTOCK TAP & DIE HOLDER SLIDING TYPE SET IN MT2 SHANK.
  • Made of High Quality Tool Steel , this is a high quality product for your lathe machine * Used for threading and tapping purpose on the lathe machine.
  • Die Holder Sizes 13/16", 1" & 1-1/2" . * Tapping Capacity of the Tap Wrench : 1/16" to 1/4" & 1/4" to 1/2".
  • Comes in precisely ground MT2 Shank, that goes inside your lathe tailstock & intended job for threading / tapping is hold in rotating chuck. * The Die....
  • The internal bore threading/ tapping is done by mounting the tap wrench head as per tap size between the above advised range is moved toward the....
Check Stock