ReviewsHand Tool Clamp

Radiator Hose Clamp Pliers Tool - Clamp Tight Wire Tool with 24 Inches Cable - Hose Clamp Removal Tool and Ring Clamp Pliers - Hose Pinch Pliers Type or Flat-band Tools - Wire Long Clip Removal Tool

Premium Quality Hose Pliers : Our hose removal pliers mechanic tool is made of high-quality carbon steel with firm grip handles double dipped in rubber for the removal of flat-type or ring-type hose clamp tool, hose removal tool is anti-rust and corrosion-resistant.
Application of Hose Grip Pliers: This pinch clamp tool can lose clamps on cars, removes factory spring hose clamp pincer, coolant hose clamps pliers and radiator hoses, automotive clamp allow technicians to access flat hose clamps in hard-to-reach areas.
Lock Function of Wire Remover: The hose remover pliers have a ratchet lock that will hold the wire clamp compressed, which can make this hose clamp remover tool a one-handed affair and helps locking pliers mechanism to remove and install metal with ease.
Easy Operate Wire Clamp Tool: Radiator hose removal has flexible pipe repair clamp tongs that make the removal and installation of the clip easier, non-slip handles of radiator hose clamp tool assures steady grip, small size makes pliers hose easy to carry.
Package Includes - Our automotive clamps tools pack for mechanics includes 1 pieces of flexible hose clamp pliers, pliers size is 3.74 x 8.3 inches (W x L), wire clamps tool is suitable for clamps with a diameter of 0.7 - 2.1 inches..

Check Stock

POWERTEC 20335 Quick Release Vertical Toggle Clamp 12130-500 lb Holding Capacity w Rubber Pressure Tip 2PK

INCLUDES: (2) Vertical Handle Toggle Clamp 12130.
FUNCTION: An essential woodworking hand tool addition to your jig assembly, delivering dependable and secure vertical hold down clamp action for your work pieces, jigs and fixtures.
HOLDING CAPACITY: Vertical clamp can hold up to 500 lbs.
CLAMP SPECS: 1-3/8” x 1-7/8 | Mounting holes: 1/4” spaced apart 1-1/4” x 1- 5/16”| Bolt length, including rubber foot: 2-1/2”.

Check Stock

Gator Lift Plywood and Sheetrock Panel Carrier 0 to 1 1/8 Grip Range 2 Pack

HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC. - Gator Lift presents one of the most innovative tools for lifting and carrying all kinds of....
GRIP HANDLE FOR ONE-HAND CARRYING - This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person....
SOLID METAL CONSTRUCTION - This tool is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from....
EASY ON YOUR BACK - Carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and....
SELF-ADJUSTING GRIPPER CLAMP - This piece of equipment by Gator Lift has a versatile, yet simple design that allows the clamp to grip onto a variety....

Check Stock

MIKMAYTOO Push Pull Action Toggle Clamps 6 PACK 301AM Latch Anti-slip Hand Tool 110Lbs Holding Capacity Quick Release Woodworking Clamp … (301AM)

【Packing type】6 PCS hand tool Toggle Clamp GH-301AM non-slip red Vertical clamp quick release tool. 100% manufacturer money back.
【Holding Capacity】90Kg / 198Lbs, solid grip.
【Material】 Cold rolled carbon steel, galvanized coating, corrosion resistant. Rugged grip, mounted on clamps, tool holders or removable bases..
【Size】190 Degree Handle Opening Angle Plunger Stroke: 16mm/0.6"..
【Wide Range of Uses】Rugged fixtures, mounted on fixtures, tool holders or movable bases, are ideal for fast fixing of metal plates or boards for machine operations, woodworking, welding, molds and more..

Check Stock

Hakkin 32 Pcs Pin Vise Hand Drill for Jewelry Making, Mini Manual Drill Kit - 0.8-3.0mm HSS Micro Twist Drill, Pin Vise, Carving Clamp and PCB Drills, Rotary Hand Press Drill for Resin, Wood, Plastic

【Value Package】The pin vises hand drill bits set include 20 pcs 0.8-3.0mm twist drill bits, a pin vise hand drill for resin, a mini carving clamp and 10 pcs 0.3-1.2mm PCB Drills. Our precise hand drill set make small holes easily in Resin, Pearls, Wood, Plastic, Polymer Clay, Bead, to make necklace, pendant, earring, bracelet, keychain, model, sculpture, etc..
【Ergonomic Design and Humanized Design】The hand pin vise is made of aluminum alloy. Easily adjustable 3 jaw chuck to clamp the drill and keep the drill upright. The adjustable range of the clamp is 0.3-3.4mm. The tail of the compact manual model hand drill can be unscrewed and the drill bit can be neatly stored inside, don’t worry about losing it. Pen size design, easy to carry and store..
【Mini Bench Clamp Instead of Hand Held】Hakkin jewelry drill bit set has an indispensable tool, that is mini bench clamp, its body is made of aluminum alloy, compact and handy, hold the item in position and prevent fingers from being hurt. The small drill press clamp supports 0 - 2.2 inch (0-57 mm), supports round, square and irregular objects, ideal for holding small parts, Watch repairing, Sculpture, Craft, Jewelry and DIY Carving..
【Many Sizes Bits】The jewelry drill is Includes 30 pieces of p....

Check Stock

Times Microwave - CST-400 - LMR-400 Prep Tool for virtually All connectors

All-In-One Combination Prep Tool for prep of LMR400 cables for crimp or clamp connectors..
This cable hand prep tool joins a cable stripper tool and a cable trimming tool into one easy-to-use device.
Prepare LMR-400 coax cable in two simple steps..

Check Stock

POWERTEC 20327 Quick Release Horizontal Toggle Clamp 201B - 300 lb Holding Capacity w Rubber Pressure Tip, 4PK

Includes: (4) horizontal quick release Toggle Clamp.
Function: an essential hand tool and addition to your jig assembly, delivering a dependable and secure non-slip grip on your work pieces, jigs and fixtures.
Design: a hold down Toggle Clamp constructed from cold-rolled carbon steel, possessing a low height design, a pressure adapter for easy depth adjustment and maximum clearance.
Holding capacity: Toggle Clamp can hold up to 300 lbs..
Clamp specs: base 1-7/16” x 1-5/16”| mounting slots 1/4” x 3/16” spaced 1” x 7/8” | bolt length, including rubber foot: 1-7/8”.

Check Stock

12 Pack 4 Inch Bar Clamps for Woodworking Quick Grip Clamps Trigger Clamp One Handed Ratchet Clamp, Mini Small Bar Clamps for Craft Wood Clamps for Gluing

【Bar Clamp 4''】Wood clamps woodworking capacity up to 4 inch. Throat depth: 1.25inch..
【Powerful Clamping Force】4 inch trigger clamp with up to 65lbs of squeezing force and a metal ratcheting mechanism, suit for light duty works, woodworking F clamps and DIY carpentry..
【Clamp And Spreader】4 inch quick grip clamps for woodworking is used in two ways, clamp or spreader. Easy to reverse jaws can turns clamp into spreading clamp or stretching tool..
【One-Handed Clamp】One handed release F clamp is adopted new grip and trigger design provides simple, you can operate with one hand. Spreader bar grip is comfortable to hold, press quick-release button to slide arm into desired length..
【Durable And Sturdy】Mini bar clamps are made of nylon body and high-quality hardened steel that provide great impact resistance..

Check Stock

POWERTEC 20326 Quick-Release Horizontal Toggle Clamp 225D - 500 lb Holding Capacity w Rubber Pressure Tip 4PK

Includes: (4) horizontal quick release Toggle Clamp.
Function: an essential hand tool and addition to your jig assembly, delivering a dependable and secure non-slip grip on your work pieces, jigs and fixtures.
Design: a hold down Toggle Clamp constructed from cold-rolled carbon steel, possessing a low height design, a pressure adapter for easy depth adjustment and maximum clearance.
Holding capacity: Toggle Clamp can hold up to 500 lbs..
Clamp specs: base 1-3/8” x 1-1/2” | Mounting slots 1/4” x 3/8” spaced 7/8” x 7/8” | bolt length, including rubber foot: 2-1/2”.

Check Stock

Dixon F1 Band Clamp Hand Tool, 5/8\ Band Width Capacity

Hand tool for application of 5/8" band clamps.

Check Stock

Poweka CV Joint Boot Clamp Pliers with CV Boot Clamps Kit, Auto Repair Tool for Car Tire Repair Clamp Removal - Car Banding/band Tool Kit, Automotive Hose Axle Plier

This set contains both a CV joint clamp banding tool and CV boot clamp pliers, which are designed for fast and simple tensioning and securing of CV boot banding strap..
Joint clamp banding tool: an effective tool for installing CV clamps. The banding tool works with the installers ratchet and 1/2" socket or uses the provided lever to tension the clamp..
CV boot clamp pliers:This device crimps and flattens ear-type clamps found on CV joint boots, and installs quick clamps on the fuel filter and cooling system hoses..
With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively. Pliers with jaws and formed handles for comfort, less user fatigue, and more productivity..
Made from high grade metal and plastic, with high hardness, long lasting. Package included: 1Pcs CV Clamp Tool, 1Pcs CV Joint Boot Clamp Pliers, 4Pcs Small CV Boot Clamps, 4 Pcs Large CV Boot Clamps..

Check Stock