ReviewsHandheld Oscilloscope

OWON HDS242 Oscilloscope 2 in 1 Universal Test Instrument, Professional LCD Display Screen Mini Handheld Digital PC Oscilloscope,20000 Counts Digital Multimeter, with Lithium Battery(40 MHz + 2CH)

  • ✨[20000 Counts Digital Multimeter ]: Digital multimeter be used to measure AC/DC voltage/current, resistance,diode,capacitance,on-off test. High sensitivity and accuracy, showing clear, stronganti-overload capability, easy to carry..
  • ✨[Small Size & Powerful Function]: Mobile phone body,Oscilloscope, Digital Multimeter multifunction in one.3.5-inch high-resolution,high-contrast color LCD display,suitable for outdoor use..
  • ✨[Great Power Management]: Ultra-low comprehensive power consumption less than 3W.Powered by 4400mAh lithium battery.The lithium battery may not be fully charged when delivered. To make the battery fully charged, it takes up to 4.5 hours (when the device is turned off) or it is subject to the charging indicator. After charging, the battery can supply power for about 6 hours..
  • ✨[Excellent Oscilloscope Performance]: OWON Handheld Oscilloscope have two acquisition modes,high refresh,deep storage,7 kinds of auto measurement,cursor measurement function and save function..
  • ✨[USB Type-C Interface]: Type-C charging interface, after every recharge of 2 hours, the device can be used continuously for a full day or standby more than two months.OWON Oscilloscope can be charged by an adapter or a power bank, and supports PC software connecti....
Check Stock

Mini Handheld Digital Oscilloscope, Support Persistence, PWM, 14 Type Measurement, 40MSa/s Sampling Rate, 18MHz Bandwidth, Signal Generator Frequency 500Khz, 2.4” LCD Display with 10X, 100X Probe

  • Faster Sampling Speed: Compared to the previous 138pro mini oscilloscope, this upgraded 154pro mini oscilloscope has a real-time sampling rate of 40MSa/s, a bandwidth of 18MHz, 500Khz signal generator frequency. Improve your work efficiency..
  • 2 Trigger Modes & One-key AUTO: The DIY oscilloscope kit configured 2 trigger modes, auto/normal. Support waveform parameter setting,such as time base, amplitude, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement..
  • There are 14 measurement options available: Frequency, P-eak to P-eak, Duty cycle, Amplitude, RMS, Average, Period, +Pulse width, -Pulse width, Max, Min,Top, Base..
  • Built-in High Voltage Protection: The handheld oscilloscope built-in high voltage protection module can withstand up to ±400V AC/DC voltage signal. And built-in 1000m-Ah high-quality battery, can be used continuously for about 6 hours after full charge..
  • Wide Applications: Ideal for the maintenance industry and the R&D education industry. It's very valuable for find ....
Check Stock

Hantek DSO2D15 Digital Storage Oscilloscope 150MHz 1GSa/s 8M,2 Channel,2CH+1CH with Signal Source

  • PROFESSIONAL AUTOMOTIVE OSCILLOSCOPE| Designed for vehicle diagnostic to inspect over 80 items including ignition, sensors, engine, startup and charge. Simply select from the preset modes, run the tests and read from the high-resolution colour LCD display screen..
  • FOUR INSTRUMENTS IN ONE| Automotive multimeter tester, oscilloscope, DMM and waveform generator in one device. Dual channel with real-time sampling-rate 250MSa/s and optional bandwidth limit 20MHz. The recording function allows it to save and recall waveform easily for reference and comparation . PC connectivity available for further analysis and diagnosis..
  • HANDHELD COMPACT SIZE| The scope fits in palm and is convenient to operate with single hand, which makes it practical for quick checks and field work. The built-in rechargeable battery can work for as long as 24 hours continuously after 2 hours charging..
  • FRIENDLY USER INTERFACE| Versatile functions with easy-to-read display and intuitive controls. Switch to different modes and functions swiftly with simple buttons. Automatic adjustment with Auto Set Key, which can adjust the horizontal and vertical scales as well as trigger coupling, type, position, slope, level and mode automatically for a stable waveform display..
Check Stock

JYETech WAVE2 2-Channel Portable Digital Storage Oscilloscope & DDS Function Generator - Fully Assembled and Tested DSO 15801 with Battery, Large 2.4\ Color Touch Screen, and 2 BNC Probes

  • A handheld touch screen oscilloscope with a knob to facilitate the measurements.
  • Two channels with BNC connectors and 10x oscilloscope probes.
  • Features max, min, average, peak-to-peak, and RMS voltage as well as frequency, total cycles, and duty cycle measurements.
  • Adjustable trigger level and an Internal source for calibration.
  • An auxiliary port with a built-in 2-channel function generator.
  • Able to display time-domain waveforms as well as X-Y relation of two signals.
  • Captured data can be outputted to a personal computer using its serial port.
Check Stock

Treedix DSO138 Oscilloscope DIY Kit Handheld Digital Oscilloscope 1msps Real-Time Sampling Rate 2.4 inch TFT Display

  • UPGRADED VERSION – The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div – 20V/div. Also, this updated version can be handheld..
  • DESIGNING TO YOUR NEEDS – Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated..
  • ROTARY ENCODER – It has been added the rotary encoder, makes parameter adjustment quicker and easier..
  • ASSEMBLED FINISHED – AUKUYEE Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time..
  • WHAT YOU GET – You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided..
Check Stock

2 in 1 Handheld Oscilloscope Multimeter, New Update Professional LED Oscilloscope Multimeter with 2.5 Msps High Sampling, Automatic Waveform Capture Function,DC/AC Voltage/Current Test

  • UPGRADED VERSION - Please Calibrate the oscope Before Use! The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div - 20V/div. Also, this updated version can be handheld..
  • DESIGNING TO YOUR NEEDS - Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated..
  • ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment quicker and easier..
  • ASSEMBLED FINISHED - AUKUYEE Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time..
  • WHAT YOU GET - You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided..
Check Stock

P4250 Oscilloscope Probe High-Voltage Probe Oscilloscope Probe BNC Oscilloscope Scope Clip Probe Test Lead Kit

  • DETACHABLE HOOK TIP: The oscilloscope scope clip probe has detachable hook tip, the hook is well protected by the plastic case.
  • HIGH PRECISION: Oscilloscope probe has insulated BNC head, high precision, suitable for all standard BNC head oscilloscope.
  • EASY TO USE: Oscilloscope clip probes have compact size, several functions combined in one, this probe is convenient to use.
  • STABLE PERFORMANCE: Locating sleeves of oscilloscope passive probes ensure the stability and reliability of the tip exposed to the test point.
  • PRACTICAL: Marker rings of digital oscilloscope clip probe in different colors help to identify different channels.
Check Stock

Compocket Minis Digital Mini USB Oscilloscope Pocket-Sized 2 Channels 2 MHz Bandwidth Works with Smartphones Tablets & PC Smart Measurements in Seconds

  • [Faster Sampling Speed]-100MHz analog bandwidth, 500MS/s real-time sampling rate(1X=5MHz,10X=100MHz).Professional handheld oscilloscope for the....
  • [Cost Effective]-LCD screen with 2.4-inch 320*240 resolution. Built-in 64M storage space, the maximum storage of 2000 waveform pictures. Equipped with....
  • [Intelligent anti-burn]-1X Can withstand up to 600V withstand voltage. The built-in high voltage protection module can withstand up to 400V continuous....
  • [Compact Design]-Handheld portable body, easy to carry. Non-toxic and lead-free environmental protection silicone protective cover, soft comfortable....
  • [Long Battery Life]-Built in 3000mAh high-quality rechargeable lithium battery, can be used continuously for 8 hours when fully charged..
Check Stock

Goupchn 500Mhz Oscilloscope Clip Probe 10x P6500B High Precision with Adjust Tool Accessory Kit

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • P6500B probe is a 500MHz oscilloscope probe with a switch for 10x attenuation. It is a good oscilloscope accessory and suitable for BNC interface oscilloscopes..
  • Probe can be used in professional test equipment. It has a 1.3m cable with standard BNC end. It has stable performance and provides several accessories. Adjustment tool can adjust compensation capacitance to match oscilloscopes. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Package include: 1 x probe, 8 x marker rings, 1 x ground wire, 1 x retractable hook tip, 1 x adjustment tool, 1 x ground spring, 1 x BNC adapter..
  • Warranty: Hope you can be satisfied with our oscilloscope probes. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us..
Check Stock

diymore Oscilloscope Case DIY Kit 2.4

  • It is simple to finish assembling the oscilloscope case kit pieces. It does fit like a glove.
  • diymore oscilloscope acrylic case will offer excellent protection while maintaining the beauty of your digital oscilloscope.
  • Note: The Kit doesn't include the oscilloscope, wish you could understand.
  • It is a function of design which this fits, all the parts were cut correctly and fit perfectly when assembled.
  • Acrylic material, looks transparent(need to tear down the film).
Check Stock

200Mhz Oscilloscope Probe Clip Scope Test BNC End Probe P2200 10X/1X Black with Adjust Tool Kits

  • BNC END CABLE: This oscilloscope probe is good oscilloscope accessories, has a cable with standard BNC end, suitable for BNC interface oscilloscope..
  • ADJUSTMENT TOOL: There is a adjustment tool that can adjust compensation capacitance to match oscilloscope..
  • 1x /10x : This probe is 200MHz oscilloscope probes with a switch for either 1x or 10x attenuation, can meet your different needs..
  • DISTINGUISHED BY COLOR : There are marking circles in different colors help to identify different channels, you can tell the channel quickly and easily..
  • STABLE: This probe has stable performance, providing several accessories ,suit for professional testing..
Check Stock