ReviewsHard Drive Cover Screws

Cuifati 2.5in Hard Drive Enclosure, 5Gbps 2.5in Hard Drive Enclosure External HDD Case Adapter for Windows,for Linux,for OS X 8.0

Fast Transfer: The maximum transmission rate of 2.5in hard drive enclosure is 5Gbps, which is fast, and the hard drive enclosure can support UASP accelerated transmission protocol, which greatly improves the storage or backup efficiency of the device..
Good Protection: Hard drive Enclosure preserves hard drives from external scratches and makes SATA hard drives easy for data storage..
Support System: External HDD case adapter supports for Windows,for LINUX,for OS X 8.0 and above. Designed for 2.5in 7mm/9.5mm SATA HDDs and SSDs up to 2TB..
Easy to Use: HDD enclosure tool free installation, no driver required, just push out the cover, insert the drive, close the cover, support hot swap, no additional power supply required..
Wide Compatibility: USB3.1 hard drive enclosure can easily connect 2.5in SSD and HDD to PC,Laptop for data transfer or expand storage..

Check Stock

2.5 to 3.5 Adapter, Inateck SSD Mounting Bracket with SATA Cables and SATA Power Cable, ST1004

2.5 to 3.5 adapter: The hard drive mounting kit supports installation of one single 2. 5 hard Drive as well as two 2. 5 hard drives to a 3. 5" Internal Drive bay..
Convenient design: Dual form facilitates operation. Side wings are detachable, which can be detached when only one hard drive is mounted..
Complete kit: mounting tools are included. Two SATA III data cables are offered and both support a bandwidth of 6Gbps, backward compatible with SATA I/II. 2 power cables are also provided for power supply..
Side and bottom installation: supports installation from side or bottom. Screw holes are placed at the bottom of the bracket to better support hard drives..
Package Content: 1 x Mounting kit, 1 x screw driver, 16 x Screws, 1x 4 pin to Dual 15 pin SATA power cable, 1x 15 pin to Dual 15 pin SATA power cable, 2x SATA data cables, 1 x User Manual..

Check Stock

Nimitz 2nd HDD SSD Hard Drive Caddy for Hp Elitebook 8560p 8570p with Faceplate/Bezel

Add a 2nd drive to your laptop by replacing your optical drive.
Comes with matched Faceplate/Bezel and mounting bracket,fits perfectly.
Works in optical drive bay of HP Elitebook 8560p 8570p.
Accepts 2.5″, 12.5mm-high SATA hard drives or less,Also compatible with 2.5″ SSD.
The hard drive attaches to the caddy from the side using long screws( 3rd picture).

Check Stock

ZXUY Hard Drive SATA 2nd HDD Caddy Tray for Unibody 9.5mm Laptop CD/DVD-ROM Drive Slot (Replacement Only for SSD and HDD)

It can be made part of RAID array and Bootable.Plug & Play, Supports hot swapping.
Compatible with: 2.5"/9.5mm SATA HDD or SSD, Hard drive NOT include.100% Brand New 9.5 mm-thick caddy..
Package Content: 1x 2nd HDD Caddy ， 4x Hard Drive Screws and 1pcs screw driver.
Fully integrated into laptop, no cables/PSU/software driver needed.Fast & Reliable connection in laptop, just as the primary HDD.
High performance SATA hard drive providing up to 500GB of additional internal hard drive space..

Check Stock

SSD Bracket 2.5 to 3.5 Adapter 2Pack, Hftywy SSD Mounting Bracket Kit 2.5 to 3.5 SSD HDD Hard Disk Drive Bays Holder Metal Mounting Bracket Adapter with Screws for PC SSD

★ 2.5 to 3.5 Hard Drive Adapter SSD Bracket Converts 2.5" Notebook Hard Drive to 3.5" Desktop Hard Drive Bay Mounting Bracket Adapter.
★Precise Fit- 4 screw holes are designed on the Mounting Adapter Bracket, which precisely corresponds to the 4 screw holes on the hard drive..
★Specifically designed for SSD drives. Optimise your PC performance and make the most of the internal space inside your PC..
★Using precision die stamping, great assemblability, easy to install. 2mm thickened metal, non-defrmation, rapid cooling, to protect your SSD HDD up to the hilt..
★Package includes 2Pack of Hard Drive Holder, and 1 x screw driver and all screws needed..

Check Stock

MACHINIST 2.5'' SATA HDD SSD Enclosure Hard Drive Caddy Case, 12.7mm SATA to SATA Hard Drive Adapter for 12.7mm Laptop CD/DVD-ROM Optical Bay Drive Slot Aluminum Case

... most brands and models of laptops, support 2.5″ HDD, SATA, SATA II, SDD, suitable for Samsung Evo, for SanDisk, for Kingdian, for Crucian MX, for WD for Western Digital, for Seagate, for Kingston, for OCZ Vector, for Drevo, Intenso, for HyperX, etc..
Trouble-free installation: There comes with 1 screwdriver and 4 screws for DIY installing, and the detailed installation steps are on the surface of the second HDD/SSD, just follow it to replace the optical drive to quickly upgrade the computer..
Package Includes : 1 x Hard Drive Caddy 1 x Screwdriver 4 x Screws If you have any questions or suggestions, please contact me, I will contact you within 24 hours and provide quality service.

Check Stock

ORICO 5Bay Hard Drive Enclosure Type-C to SATA 3.5inch Enclosure Magnetic Tool-Free External HDD SSD Enclosure Storage Case Built-in Fan for Data Backup, NAS Expansion Up to 80TB(5x16) - DS500C3

Tool-Free Installation -- The orico 3.5 external enclosure designed with magnetic chips on the cover, no screws and tools needed to helps you easily install the hard drives in 3 seconds to saving your time and improving your working efficiency..
Up to 80TB Large Capacity -- The usb c hard drive enclosure can support all 3.5 inch SATA hard disks and up to 80TB for every single 16TB storage disk, convenient for enterprise data backup and exchange, also a good tools for the nas expansion..
Super-Speed Transmission -- Multi bay external hdd hard drive enclosure, internal SATA, with 2.5 inch and 3.5 inch SATA HDD / SSD connect type-c high-speed and adopted with high performance master control chip, the hard drive external bay with the speed transmission reaches up to 5Gbps, much faster than the traditional USB3.0..
Built-in double ball bearing fan -- A built-in 120mm double ball bearing fan which has good performance on high rotating speed and long service life, the 5 bay hd usbc enclosure with design of large-area honeycomb holes in the rear panel can helps the heat dissipation..

Check Stock

TIGERSECU Super HD 1080P H.265+ 4-Channel Hybrid 4-in-1 DVR Security Recorder Without Hard Drive, for 2MP TVI/5MP TVI/AHD/CVI/Analog Cameras (Cameras and Hard Drive Not Included)

...eating, which means no fan noise and a quieter system. 4 audio inputs for audio recording. Supports 3 monitor connections through HD-port/VGA/CVBS ports..
This set includes one 4 channel CCTV security DVR without pre-installed surveillance hard drive, one 12V 3A 100V-240V power supply, remote control, USB mouse, and screws to fasten a surveillance hard drive (cameras and hard drive sold separately). TIGERSECU security DVR systems are backed by Lifetime Support and 2-year warranty provided by TIGERSECU..

Check Stock

DELL INSPIRON 1764 Black Zinc Laptop Hard Drive Screws, 10X M3x3MM M3X3L PM3X3.0 Screw by LaptopScrewsDirect

WILL FIT NEARLY ALL 2.5″ LAPTOP HARD DRIVE,SATA OR IDE.
M3X3MM BLACK ZINC WAFER HEAD MACHINE SCREWS.

Check Stock

RLECS HDD SSD Caddy Adapter SATA 3.0 Interface Laptop Hard Disk Holder 9.5mm Hard Drive Mounting Bracket for CD DVD ROM Optical Bay 2.5 inch

Made of high quality plastic as the main material, hollow out bottom design, light weight, convenient to carry, flush mount bottom, built-in metal nut screw hole, more stable installation.
Add this Serial ATA Hard Drive Adapter to your laptop to get a second hard drive, which can bring you maximum data storage flexibility and back up important applications and critical data.
Simply remove your CD/DVD-ROM drive and put this hard disk tray (with the added hard drive) in its place. Fully integrated into Laptop, no cables / PSU / software driver needed.
The Universal SATA-to-SATA Caddy is compatible with laptops that has a 9.5mm-thick / high optical bay with a SATA interface.
Package includs: 1 x SATA 3.0 Laptop Serial ATA Hard Drive Adapter + 4 x mounting screws + 1 x screwdriver. Support 2.5" HDD, SATA, SATA II, SDD.

Check Stock

Nekteck Aluminum USB C Hard Drive Enclosure SATA HDD/SSD Adapter Case with USB Type C to C Gen 2 Cable Tool Free Hard Disk Enclosure - Silver 3.5In

[Type-C Port]: With the latest and most advanced USB-C connector, which allows you transfer data and never have to worry about plugging in upside down.
USB C 3.5 Inch HDD/SSD SATA Type-C Hard Drive Enclosure designed to connect a hard drive with host computer easily and expand storage space through high speed up to 5Gbps.
Features aluminum design, contemporary and ultra slim design, practical and easy to use, exquisite workmanship provides excellent performance.
Plug & Use: No Screws needed just plug the hard drive in enclosure and use. ( Strongly recommend to format the hard drive before the first time in use.).
What is in the box: 1x Nekteck 3.5 Inch SATA Type C Hard Drive Enclosure.
1 x USB C to USB C Gen 2 Cable(USB-IF Certified 50cm).

Check Stock