ReviewsHard Drive Reader With Fan

3.5' External Floppy Disk Reader Drive Portable Floppy Disk Reader 1.44MB FDD for PC Windows 98/ME/2000/XP/Vista/Windows 7/8/10 Plug and Play

  • [HIGHER QUALITY & COST-EFFECTIVE] Floppy disk reader is made of high-quality hard plastic and very nice looking. Ultra-thin design is more convenient to carry. Factory direct sales, we have been making floppy disk readers for more than ten years, you will get better quality and more cost-effective floppy disk drives..
  • [BRINGING BACK GOOD MEMORIES] A usb floppy drive is great for reading old floppy disks, it can help you get back your precious and fond memories of the past. You can use it to find precious photos and files that were stored on floppy disks years ago. It’s definitely a gift that will move parents and grandparents alike..
  • [PLUG & PLAY] External floppy disk drive no extra driver required, just plug it into usb connector directly, it will automatically install driver by itself. USB port powered, no external power supply is required. With interference preventer, effectively prevent the drive from external noise. USB 1.1/2.0 compatible,Read/Write 1.44 MB floppy disk..
  • [UNIVERSAL COMPATIBILITY] The floppy disk reader has strong compatibility, Support Windows 2000/XP/Vista/7/8/10 Notebook,PC,Desktop,for Dell, for Acer, for Sony,for HP etc..
  • [NOTE] To ensure that the floppy disk reader has enough power, please plug our external disk directly into ....
Check Stock

CNCTOPBAOS Upgrade CNC 3018 Pro 3 Axis DIY Mini CNC Router Kit with GRBL Remote Control Offline Controller PVC PCB Acrylic Plastic Wood Cutting Engraving Carving Milling Machine

  • ♞【Upgrade Version 3018 Pro with Offline Controller】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers.
  • you can operate this machine without connect the computer.
  • offline controller included a SD card reader to write into the root directory G-code files or NC file.
  • Support manually adjust X, Y, Z axis location as engraving starting point,manually open or close spindle..
  • ♞【Main Feature】 Working area:30x18x4.5cm.
  • Type: USB Port Desktop cnc router/Spindle: 775 spindle motor (12-36V) 24V:10000rpm/ Stepper Motor: Nema17 stepper motor,1.3A, phase resistance 2.1 ohms, torque 0.25N.m.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module..
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copp....
Check Stock

StarTech.com USB 3.0 / eSATA 5-Bay Hot-Swap 2.5/3.5” SATA III Hard Drive Enclosure with UASP – 5-Bay SATA 6 Gbps Enclosure for HDD / SSD (S355BU33ERM)

  • Connect five hot-swappable 2.5/3.5″ SATA III hard drives to your computer externally through USB 3.0 with UASP or eSATA.
  • Compatible with USB & eSATA enabled laptop & desktop computers and 2.5in & 3.5in SATA hard drives.
  • External Hard Drive Enclosure / USB 3.0 eSATA HDD Enclosure / 5 Bay Hard Drive Enclosure / USB 3.0 or eSATA Back-up Drives.
  • Expand the storage capacity of a small form factor system or laptop.
  • Add a 5-bay hot-swap enclosure to a server or workstation.
Check Stock

Hard Drive Docking Station, Tccmebius TCC-S867-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External HDD Enclosure, for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD

  • ... drive and SSD, Maximum supports 8TB SATA interface hard drive, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Tool free installation, Convenient external hard drive reader. Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard drive to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB / s..
  • One-Touch Backup: One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive. For information on using the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
  • WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your....
Check Stock

UGREEN USB C Hard Drive Enclosure USB C 3.1 Gen 2 to SATA Adapter for 2.5\ SATA SSD HDD 6Gbps High-Speed Support UASP SATA III Compatible with MacBook Pro Air WD Seagate Toshiba Samsung Hitachi

  • ...with your computer to expand storage, upgrade system, back up files, retrieve and recover data, and transfer data. This external hard drive enclosure protects the external hard drive from outside scratches and makes the hard drive portable for the data storage..
  • 【6Gbps High-Speed SSD Enclosure 】UGREEN hard drive reader supports 6Gbps max transfer speed and UASP accelerated transmission protocol, 70% Faster than traditional USB 3.0. The USB-C port is standard USB 3.1 Gen 2 which supports 10Gbps and (7+15)Pin SATA III supports max 6Gbps. 【USB-C to UAB-C Cable included】.
  • 【Multi-Protection 2.5" SSD Enclosure】Blue LED indicator lets you know the working status easily. The attached soft EVA foams inside protect your hard disks from shaking and scratches. The 3 minutes Auto Sleep Mode helps to extend the lifespan of your hard drives. Comes with a detachable 50cm cable, it is quite flexible to connect and convenient to take along..
  • 【Easy Installation HDD Enclosure】Plug and play with tool-free installation, no driver needed for this external hard drive case. Supports Windows/Mac OS/Linux systems, game consoles like Sony PS4/PS3/Xbox One, Smart TV, Router, etc. 【For the devices only with USB A port, please use your own USB C to USB 3.0 A cable....
Check Stock

Yottamaster Type-C 10Gbps 4 Bay Hard Drive Enclosure Daisy Chain, External Direct Attached Storage HDD Enclosure Support 4x18TB Capacity-Can Expand 2 USBC Devices for up to 216TB Capacity [FS4C3]

  • 【Daisy Chain – 216TB Monster Capacity】This 4 bay hard drive enclosure supports 4 hard drives with a maximum capacity of 72 TB and 18TB for single drive. Use the dual USB-C Gen2 (10Gbps) ports to daisy chain two additional peripheral devices (except main device), which means the whole capacity could reach up to a monster 216TB enterprise-class storage capacity in total..
  • 【10 Gbps Ultra-fast Speed】 This 4 bay hard drive enclosure adopts USB3.1 GEN2(Type-C) protocol with a transfer rate up to 10Gbps (Max). Note: The speed will vary from the different performance of hard drive and computer host. Applicapable to Windows, Mac OS and Linux devices..
  • 【For 2.5″/3.5″ HDD & SSD】 Yottamaster 4 bay HDD enclosure has FOUR mental removable trays, fiting both 2.5″ SSDs where speed matters most and 3.5″ HDDs when it’s important to maximize the storage capacity. The hard drives are fixed by provided screws, which can effectively be against shock and interface damage. Works well with WD Red hard drives..
  • 【80mm Silent Fan】 Yottamaster hard drive enclosure is made of all aluminum. It not only provides a stable structure while running, and ensures a long term use. Plus an 80mm silent fan, meteor cooling holes on front and rear panel and the u....
Check Stock

Sinreton 736pcs PC Computer Standoffs Screws Assortment Kit for 2.5\ SSD, Hard Drive, Computer Case, Motherboard, Fan, Power Graphics

  • [10 different size screws]: use for 2.5" SSD, hard drive,computer case, power supply, motherboard, hard drives, fan and floppy,CD-ROM drives.
  • [Style]:hard driver screws(M3.5x5mm),hand twist case screw,Main board fixed screws (M3 x 5),CD-ROM set screws (M3 x 4),fan screws(M5x10),case screws screw (M3.5 x 6),M3 washers,2.5" M3 ssd screws.
  • [Material]: Made of high quality black zinc plated which have superior rust resistance and excellent oxidation resistance.
  • [Application]:Perfect for 2.5" SSD, Hard Drive, computer case, power supply, Mainboard/motherboard, fan and floppy/CD-ROM/DVD-ROM drives.
  • [Total]: 736pcs computer screws with a storage box.great for PC building hobbyist.
Check Stock

StarTech.com Hot-Swap Hard Drive Docking Station for 2.5\/3.5\ SATA III Hard Drives - External eSATA/USB 3.0 Hard Drive Dock w/ UASP (SDOCKU33EF) , Black

  • MAXIMUM COMPATIBILITY: The USB 3.0/eSATA hard drive docking station features a sleek slot-loading design that supports both 2.5in and 3.5in drives. It also supports large capacity drives (up to 6TB)..
  • MAINTAINS OPTIMAL TEMPERATURE: The HDD docking station for 2.5" or 3.5" SATA III has a built-in 80mm fan that helps keep your drives running cooler. The fan helps reduce power consumption and noise..
  • SMART DESIGN: The hot swap docking station with UASP will power down your SATA drives after a period of inactivity (USB mode only) or when the computer is turned off..
  • UASP ENHANCED: The hard drive docking station with fan also supports UASP, which delivers performance up to 70% faster than conventional USB 3.0 when paired with a compatible host controller..
  • Easily connect and swap hard drives and solid-state drives to and from your computer system, with the added benefit of a built-in 80mm fan.
  • Works with eSATA or USB 3.0 computer systems such as MacBook Pro and 2.5" & 3.5" SATA hard drives & solid-state drives.
  • eSATA SSD Dock / SATA 6Gbps transfer speeds / USB 3.0 HDD dock with UASP.
  • Connect drives to this dock for data recovery applications in a data recovery center or computer repair shop.
  • Backup data to an external data archiving drive.
Check Stock

TERRAMASTER D4-300 USB 3.1 Gen1 Type-C Storage External Hard Drive Enclosure Hot Swappable Diskless

  • Designed for applications like video editing, photo backup, technical document preservation, file backup, music library, financial records (this is NOT a NAS, it is a DAS and does NOT support RAID)..
  • USB3.1 (Gen1, 5Gbps) Type-C interface, compatible with 3.5” SATA hard drive/2.5” SSD, supports up to 4 hard drives, total storage capacity up to 80TB (20TB x 4)..
  • Supports hot swapping. The drive can be rapidly installed in 5 seconds..
  • The device is driverless and supports MAC, Windows, Linux cross-platform operating system.
  • fully compatible with the USB protocol, and can be used with any computer, TV, server, set-top box and other devices..
  • Intelligent temperature control low noise fan. The fan speed is automatically adjusted with the temperature of the hard drive..
Check Stock

Hard Drive Docking Station, RSHTECH Aluminum USB 3.0 to SATA Dual Bay External Hard Drive Dock for 2.5 & 3.5 inch SATA HDD SSD with Offline Clone/Duplicator Function, Support UASP & 2x16TB (RSH-DS01)

  • ...36W Power adapter]Hard drive docking station adopts aluminum case and port dust cover design, which is sturdy and durable. SATA HDD dock duplicator power supply is highly efficient (UL Listed DC 12V/3A), stable and reliable power source guarantees a steady supply of energy..
  • [Broad Compatibility] Dual bay hard drive reader compatible with Windows 2000/ XP / Vista / Win 7/ Win 8/ Win 8.1/ Win 10, Mac OS 9.1 and above, Linux 2.4 or above, PS4 , PS4 Pro, Xbox 360, Xbox one, etc..
Check Stock

2021 Newest Dell Inspiron 15 3000 Series 3505 Laptop, 15.6

  • 【Operating System】Windows 10 Home 64-bit.
  • 【Memory & Storage】Memory is 16GB high-bandwidth RAM to smoothly run multiple applications and browser tabs all at once. Hard Drive is 256GB PCIe NVMe M.2 Solid State Drive which allows to fast bootup and data transfer, and 1TB Hard Disk Drive for ample storage space.
  • 【Processor】AMD 3rd Generation Ryzen 5 3450U Quad-Core 2.10GHz Processor (6MB Cache, up to 3.50GHz), AMD Radeon Vega 8 Graphics.
  • 【Ports】2 x USB 3.1, 1 x USB 2.0, 1 x HDMI, 1 x Combination Audio Jack, 1 x RJ-45 Connector, 1 x Multi-format SD Media Card Reader.
  • 【Screen】15.6″ Full HD Touchscreen (1920 x 1080) Display.
Check Stock