ReviewsHardened Steel Nozzle

Bibo Eyeful Pencil Eyeliner A - Brown Harajuku Culture Pack

Premium Quality: MK8 nozzles are made of high quality Hardened Steel and Brass.Heavy duty and provide a long service life.Easy to install and change.
Applicability: MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D....
output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect....
Package Include--Printer nozzles come with 30pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 12 x 0.4mm, 3 x 0.5mm, 3x....

Check Stock

ERYONE Sparkly Glitter Shining PLA Filament for 3D Printer, 1.75mm, Tolerance: ±0.03mm, 1kg(2.2LBS)/Spool, Black

Gypsophila sparkling PLA 3D filament material with shiny bright surface and little laminated striation..
Print Temperature Range & Diameter: 190－220℃. 1.75mm (tolerance ±0.03mm). We recommend hardened steel nozzle 0.5mm. Brass, and other softer alloy nozzle, may wear out..
No bubble or dust inside, lower clog or tangling rate..
Sealed vacuum bag to keep it dry and keep out dust..
spool inner diameter 57mm, spool outer diameter 200mm, height 64mm..

Check Stock

New Portable Handheld Air Sandblaster Sand Blaster Kit Rust & Paint Remover

30 lbs. capacity seamless polyethylene plastic carry hopper.
Heavy duty sandblasting gun with hardened steel nozzle.

Check Stock

25PCS 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.2 0.3 0.4 0.5 0.6 0.8 1.0 mm

Premium Quality: MK8 nozzles are made of high quality Hardened Steel, Stainless steel and Brass.Heavy duty and provide a long service life.Easy to....
Package Include--Printer nozzles come with 25pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 7 x 0.4mm, 3 x 0.5mm, 3x....
Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, Anycubic, compatible with all 1.75mm PLA ABS 3D....
output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect....

Check Stock

Naked Gun Spray Gun Paint Remover

...TION: Efficient gun cleaning solvent that keeps your action cycling smooth and eliminates malfunctions of moving parts caused by fouling and grime build-up.
SAFE ON FINISHES: Gun cleaner solvent that is tough and relentless on grime and residue, but gentle on gun finishes.
safe to use on blued surfaces, colored case hardened steel, brass, chrome, cerakote, polymer and more..
TWO-POSITION NOZZLE STRAW: An industry first flip up nozzle.
“UP” position provides pip-point application while “DOWN” position provides a wider spread.
the straw stores safely when not in use..
TOTAL GUN CLEANING SOLUTIONS: Foul-Out Gunk Blaster is one of three, specialized gun cleaning chemical solutions developed by Real Avid.
for best results use together with Bore-Max Foam Bore Cleaner and Gun-Max Gun Oil..

Check Stock

SIMAX3D 5PCS Volcano Nozzle 0.4MM,M6 Hardened Steel Printed Head for J-Head Hotend Extruder Parts,Compatible Artillery/Sidewinder 3D Printer.

Made of hardened steel material, ①High thermal strength, can work for a long time at temperatures between 450 and 500°C ②Good corrosion resistance ③Good low temperature performance, hardened steel can still maintain its mechanical properties at low and ultra-low temperatures. Compared to brass nozzles, they have higher hardness and wear resistance and longer service life..
Parameters:Input diameter 1.85mm, output diameter 0.4mm, external thread M6, thread length 13mm..
Suitability and compatibility: our nozzles are suitable for Sidewinder X1, TEVO 3D printers and are compatible with all 1.75mm PLA ABS 3D printers..
Superb technology: Manufactured by CNC precision automatic lathe to ensure concentric input and output holes, the unique molding technology ensures a smooth and burr-free nozzle interior, which not only reduces resistance and avoids filament clogging, but also makes the filament run smoother..
Quality Assurance: The products are strictly inspected before leaving the factory, if there is any quality problem, please contact us in time, we will deal with it for you in time..

Check Stock

7pcs Triangular/Round Speed Welding Nozzle with Tacking Nozzle Push Fit 5mm Standard Weld Tip for PVC Vinyl Flooring Plastic Hot Air Welder,Weld Nozzles for Fabrication and Car Bumpers Repairing

HIGH QUALITY: 100% brand new and high quality..
EASY TO CLEAN: It is highly effective for the quick and easy cleaning of spatter..
PROLONGING THE NOZZLES LIFE: The blades will help prolonging the nozzle life, and reducing the chances of wire sticking..
EASY TO OPERATE: It is easy to operate, for you just need to insert the hardened steel blades into a spatter clogged welding nozzle of your mig welding torch and twirl..
EASY TO CARRY: It is convenient to carry. You can put this handy tool in your toolbox or on your welding table..

Check Stock

Ickiya All Metal Extruder Kit 500° High Temperature High Speed 3D Printer Extruder Hot end Kit for Ender 3/CR10/VORON 2.4 3D Printer Blue

Fits: CR-10S Pro / CR-10 Max/Ender3 V2/ Voron 2.4 etc..
Orifice size: 0.4mm MK8 Hardened Steel Nozzle.
The copper heating block is upgraded, Add PT100 hole position..
High temperature resistance, standard all-metal kit, overall high temperature resistance.(It is not recommended to apply 500 ° high -temperature....
Compatible with all filament PLA, ABS PETG, TPU, PP, PC, Nylon, PEEK, PEI and composites containing abrasive additives such as carbon fiber, steel,....

Check Stock

3D Printer Nozzles, 30PCS Hardened Steel and Brass MK8 Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Cleaning Tool Kit for CR-10/ Ender 3/5 , Ender 3/ V2 Ender3 pro

Premium Quality: MK8 nozzles are made of high quality Hardened Steel and Brass.Heavy duty and provide a long service life.Easy to install and change.
Applicability: MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break. Perfect to handle tough extruder hot end nozzle clogs.
Package Include--Printer nozzles come with 30pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 12 x 0.4mm, 3 x 0.5mm, 3x 0.6mm, 3x 0.8mm, 3x 1.0mm,with 10PCS Cleaning Needles.

Check Stock

Eastwood 5 Pack 5-20 in. X 10 1/2 in. Window Liners Replacement Abrasive Media Blast Cabinet

Our Famous C-35 Series Power Gun with Long-Lasting 1/4" Tungsten Carbide Nozzle! Skat Blast Pro C-35-C Foot-Pedal Power Gun is "High-Velocity" and is designed especially for siphon blasting in all foot-pedal-operated Skat Blast Cabinets..
Includes our famous C-35 Series Power Gun with a durable medium 1/4" Tungsten Carbide Nozzle installed in the gun for long life. Carbide nozzle outlasts 30 ceramic nozzles. Plus, ergonomic handle for operator comfort..
Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life.
and has a case-hardened insert for better fit against back side of nozzle. If it's time to replace your foot-pedal gun in your cabinet, this is the one to buy!.
Has 1/4" standard female pipe thread air inlet at bottom of handle. Your hose from pickup tube slips on power head. Accepts 5/8" ID siphon hose. Complete with 1/4" medium Tungsten Carbide Nozzle and medium air jet installed in gun, 2 medium air jets, 1 air jet gasket, and allen wrench..
Max 125 psi. Requires 10-15 cfm, 5-7 HP. 7-3/4" wide, 6-1/2" high, 1" deep. Made in USA. Patent No. D760,571. FOR SIPHON BLASTING ONLY..

Check Stock

Anet 3D Printer Extruders, 30PCS Hardened Steel and Brass MK8 Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm with Cleaning Tool Kit for CR-10/ Ender 3/5, Ender 3/ V2 Ender3 pro…

Premium Quality-MK8 nozzles are made of high-quality Hardened Steel and Brass. Heavy duty and provide a long service life.Easy to install and change.
Applicability-MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printers. Fit exactly like the original.
output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm.
Excellent Cleaning Needles-The nozzle cleaning needles are very flexible and robust, easy to bend the needle into the nozzle, and will not break. Perfect to handle tough extruder hot end nozzle clogs.
Package Include-Printer nozzles come with 30pieces MK8 nozzles in 7 sizes(quantity x output diameter): 3x 0.2mm, 3x 0.3mm, 12 x 0.4mm, 3 x 0.5mm, 3x 0.6mm, 3x 0.8mm, 3x 1.0mm,with 10PCS Cleaning Needles and 1 pcs Tweezers.

Check Stock