ReviewsHardened Steel Tool

Starrett Air-Hardened A2 Tool Steel Flat Stock, Precision Ground, Standard Tolerance, ASTM A681, 1 1/2\ Width, 1/8\ Thick, 18\ Length

  • Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
  • This steel can be carburized or case hardened After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
  • The Starrett Company uses its own ground flat stock for many of its precision tool parts.
  • Full-length identification eliminates confusion with other steels.
  • Starrett A2 Tool Steel precision ground flat stock is a 20 carbon fine-grained, killed steel, which can be carburized or case hardened very similar to AISI 1018.
Check Stock

iCrimp Wire Rope Swager for Crimping Fishing Lines Up To 2.2mm

  • Hardened Steel / Black Oxidation Jaws: iCrimp Fishing Crimping Tool used high-quality carbon steel to support the jaws hardness.After black oxidation treatment on the surface form a dense layer of oxide film so you do not have to worry about it will be preserved by sea water corrosion or occasional inappropriate and rust.
  • 4 Crimping Positions and 2 Hardened Side Cutters:The 4 crimping positions include:0.5-0.1mm, 0.1-0.5mm, 1.0-2.0mm, 2.2mm.It can easy crimp copper / aluminum sleeve and more from 50-450 lb test line.
  • 2 Hardened Side Cutters and Loaded Spring Handle: The 2 hardened steel side cutters work with the spring which loaded handle.It help you cut the wire / monofilament without frays and the strong spring open the cutters instead by your hands.
  • Cushioned non-slip grips and Feature a Safety lock: The stainless grips wrapped with the non-slip cushioned and comes with a safety lanyard.The safety lock is easy way to keep you crimper close.
  • Better Quality:Hassle-free money back for non-artificial damage. Fishing promises 100% satisfaction to our every customers.
Check Stock

ZLKSKER 8 Inch Adjustable Lockable Steel Wing Divider, Leather Compass for Woodworking & Leather Craft, Marking & Scribe Tool

  • Hardened and tempered Bow springs and fulcrum spools to assure uniform tension without any play. Made of quality tool steel..
  • These are useful measurement transfer tool(s) for uneven surfaces, great for a variety of uses such as tracing contours and scribing circles into metal.
  • The forged steel legs feature hardened points for precise marking of the work piece.
  • An adjusting screw has a self-seating washer and nut to permit quick and positive adjustment.
  • Frequently used in conjunction with other rulers for the most accurate measurement transfer.
  • Sizes in 4" (100 mm )- Comes as a Set of Insider, Outside & Divider Calipers.
Check Stock

Fongmore 10 Inches Heavy Duty High Leverage Coaxial Cable Cutter Wire Cutter, Cable Aluminum and Copper Cabling Cutter

  • Easy to cut up to 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications cable with our expertly induction-hardened high-carbon steel cutting edges, Not for steel or ACSR..
  • Made of durable Chrome-Moly steel, these cable cutters feature precision-machined knife and anvil style cutting blades with a low profile design that makes this the perfect tool for applications in confined areas..
  • The long handle of the wire crimper is 10 inch and wrapped with soft rubber, ergonomic lever structure design can increase friction and help you use less effort ..
  • You will get one piece cutter,Through-hardened (not case-hardened) for longer-lasting cutting surfaces..
Check Stock

The Best of Metal Blade, Vol. 2 [Vinyl]

  • EZARC oscillating saw blade with carbide teeth can easily handle the toughest metal applications with 30 × life vs Bi-Metal blades..
  • Upgrade carbide laser welding technology with a slim body makes the blades extremely strong and durable for heavy duty nails cutting..
  • Super endurance for hardened materials, e.g. stainless steel, hardened screws and nails, fiberglass and plasterboard boards, etc..
  • The 'MUST HAVE' caribe oscillating multi tool blades are designed for tough cutting jobs on hard material..
  • Our universal oscillating tool is suitable for professionals and DIYers. Two extra adapters fit most of the conventional oscillating tools on the market..
Check Stock

Real Avid Hammer & Punches + Smart Bench Block

  • ESSENTIAL GUNSMITHING TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and STANDARD PUNCHES Set paired up with innovative Smart Bench....
  • GUNSMITHING HAMMER: adjust to the situation with interchangeable hammer heads: easily switch between steel, brass, rubber, and nylon.
  • STANDARD, FLAT TIP PIN PUNCHES FOR ANY GUN: hardened steel, nickel plated flat tip punches for driving out solid pins.
  • Includes 9/32, 1/4, 7/32, 3/16, 5/32, 9/64, 1/8, 3/32, 5/64, 1/16" nickel-plated, hardened steel pin punches.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
Check Stock

Micro 100 T-105-V Cut Off Tool - T Style - V-Groove - Brazed, 1/8\ Width.760\ Length, 11/16\ Square Shank Height, 5\ OAL, Uncoated

  • Double ended "T" style cut-off tool that is parallel ground to help achieve a straighter cut.
  • Tops are hollow ground to help curl the chip to center for better evacuation.
  • Additional V-groove ground into the top of the tool forces the chip into a " W" form to pull the chip to center resulting in better surface finish and chip evacuation.
  • Hardened and precision ground steel blades.
  • Solid carbide tipped with zinc coated hardened steel shank.
Check Stock

Micro 100 T-100-V Cut Off Tool - T Style - V-Groove - Brazed, 1/16\ Width.760\ Length, 1/2\ Square Shank Height, 4-1/2\ OAL, Uncoated

  • Double ended "T" style cut-off tool that is parallel ground to help achieve a straighter cut.
  • Tops are hollow ground to help curl the chip to center for better evacuation.
  • Additional V-groove ground into the top of the tool forces the chip into a " W" form to pull the chip to center resulting in better surface finish and chip evacuation.
  • Hardened and precision ground steel blades.
  • Solid carbide tipped with zinc coated hardened steel shank.
Check Stock

Estwing 6.75-Inch Long Precision Pick Tool with 40-Degree Angled Tip for Removing Hoses, Clips, Washers, and More, Chrome Vanadium Steel, Comfortable Grip

  • 40-degree tip - 40-degree angled tip is ideal for prying free clips, breaking hose connections, removing washers, and more.
  • Precision tool - mini sized hook measures 6.75-inches long and is ideal for delicate, precision tasks.
  • Hardened steel - hardened chrome vanadium steel tool shaft with rust-resistant polished chrome finish.
  • Knurled shaft - 3-inch long pick shaft has a knurled section for maximum control during precision tasks.
  • Comfort grip - dual molded pp / tpr ergonomic handle helps prevent hand fatigue.
Check Stock

CECO-USA 13 Function Bike Tool with Chain Breaker – Bicycle Multi Tool – Ultra Slim, Compact Pocket Sized, Lightweight – High Strength CR-V 6150 Tool Steel – Easy To Carry

  • PRO GRADE ULTRA SLIM 13 FUNCTION TOOL with CHAIN BREAKER – Hardened tool steel engineered for dependable long lasting use. Created with portability in mind, its ultra slim 0.45 inch profile gives you a compact and lightweight tool that’s easy to carry..
  • LONG LASTING DURABILITY - Hardened CR-V 6150 tool steel and side bars for maximum strength, portability, and years of long lasting use. Built in lever makes chain breaking much easier..
  • PRECISION CNC MACHINED – Each of the tool bits are machined for an exact fit into screw openings and a firm hold during use. Includes Hex (2 –2.5 –3 –4 –5 –6 –8mm), Phillips #2, Slotted #5, Torx T25, Spoke Wrench (14, 15), and Chain Breaker (8 – 9 – 10 – 11 speed)..
  • POCKET SIZED and EASY TO CARRY – Conveniently take it where ever you go without slowing you down, thanks to its ultra slim and compact 1.8 x 3 x 0.45 inch profile that only weighs 147 grams. Carry it around with the included high quality canvas bag..
  • CECO USA offers stylish high quality bicycle tools that are competitively priced and durably built. Every tool goes through multiple inspections for quality assurance before leaving our facility..
Check Stock

DRFRIEDELS 22-in-1 Stainless Steel Multitool Safety Lock with Universal Socket

  • ...uler, screwdriver bit set, universal socket, an adapter for the universal socket & screwdriver bits, plus a useful nylon bag which can be attached to your belt for easy accessibility while working on projects.
  • PREMIUM QUALITY MULTI TOOL FOR REPAIRS AND DIY – our 22-in-1 multi tool is made from the highest quality, hardened steel, which is strong, durable, and rustproof too. The universal socket is made of 54 individual hardened steel spring pins so you can complete your jobs in confidence and with ultimate precision.
  • 100% SATISFACTION GUARANTEE – we are highly confident in the superior quality and durability of our pocket multi tool. If you have any issues with your purchase, please contact us directly, within 30 days, for a full replacement or refund.
Check Stock