ReviewsHardness Measurement Tool

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
Tight impact bolts, simple structure, often applied for small hole processing.
Note: due to the slight color change of manual measurement and different display settings, please allow a difference of 1-3 cm.
Due to the difference between different monitors, the picture may not reflect the actual color of the item.

Check Stock

Angle Gauge Drill Bits, 3Pcs S/S Angle Gauge Measurement Drill Sharpener Tool Set Including Drill Diameter, Drill Bits and General Angle Gauge with Case

Professional Measurement Tool: This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection.
Professional and Standard Parameters: 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles.
Comprehensive Angle Range: This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °.
Suitable Utilization: Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills.
Durable for Long-Time Use: Made of high quality stainless steel, this set of angle gauge has high hardness, and it is durable for long-time use.

Check Stock

DURATECH Magnetic Tape Measure 25FT with Fractions 1/8, Retractable Measuring Tape, Easy to Read Both Side Measurement Tape, Magnetic Hook and Shock Absorbent Case for Construction, Carpenter

...ss plastic and TPR elastic rubber, which is wear-resistant and drop-proof..
【MAGNETIC HOOK】The end of the measuring ruler tape is outfitted with powerful magnets. Those magnets are strong enough to grip any metal surface effortlessly. The fractional double-sided tape measure makes it easier to take single-person measurements even over long distances..
【LOCKING MECHANISM】 Secure sliding Thumb lock makes locking a natural movement. The retractable tape measure slides up and down to releases and locks with ease , which is a style of locking that very reliable..
【ZERO POINT CORRECTION HOOK】Sliding hooks are used for precise inside and outside measurement, so measurement uncertainty can be tightly controlled. The magnetic claw can move back itself to deduct its own thickness when conducting inside measurement..
【MAKE MEASURING EASY】The easy read tape measure with metal buckle design and portable hanging lanyard is perfect for indoor and outdoor measurements. Easy to read 1/8 inch fractional marks, feet marks,triangle markings every 19.2" make DURATECH tape measure a perfect tool for engineer, builders, carpenters and more..

Check Stock

Mohs' Hardness Test Kit for Industrial Applications

This set includes 8 Mohs' Hardness Points from Mohs' 2 through Mohs' 9, nicely mounted in nickel-plated Brass, color-coded, number-stamped, double-ended Pin Vises. Also includes two Hardness Plates of Mohs' 3.5 and 5.5, a 100x Sharpening Stone, along with laminated Instructions permanently affixed to inside of case, a Table of Industrial and other materials sorted by Mohs' Hardness, all compactly packaged in a molded Plastic carrying Case, designed for use in rugged workplace environments..
The Hardness Points are made of Metals and Alloys of equivalent Mohs' Hardness as the mineral standards, so the points will not break off, and they can easily be re-sharpened, and ultimately replaced after many years. This beautiful and thoroughly conceived tool is made for the opposite of "planned obsolescence"..
This is probably the foremost tool used in the Concrete Polishing industry, for determining the Mohs' Hardness of the underlying Concrete matrix. We especially configured it with customized components, Instructions, Hardness Tables, and Carrying Case for Industrial use..
IMPORTANT: For Rockhounds and Mineral enthusiasts, instead, we highly recommend our especially configured Deluxe Hardness Pick Set and Mineral Identification Kit. Just search Amazon using t....

Check Stock

British Whitworth BSW & Metric Screws Bolts Pitch Measure Thread Gauge 51 Blades Gages

ITEM NAME-29 Degrees ACME Screw Pitch Gauge 16pcs set, measuring range: 1-12in.
GOOD FUNCTION- Screw Pitch Gauge Accurately measures T-Thread with thread blades of varied size.
Used for checking tool angle while cutting threads in metal turning lathes.
HIGH QUALITY MATERIAL-The Screw Thread Pitch gage is made of stainless steel, through quenching processing, strong hardness ,elegant appearance.
It won't get rusted easily and owns long lasting durability.
EASY TO USE- Each thread blade has a distinct saw-tooth shape and laser-engraved numbers on each piece for easy measurement and reading.
EASY TO CARRY- Folding design the Screw Pitch gage, when not in use each thread blade can be recovered, folded compact size, increased portability.

Check Stock

Upgraded woodworkers Edge Ruler Thickness 1.5mm Approximately 15in .0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler JXHONG

Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..

Check Stock

Titan Tools - External Deburrer 51950

【Durable Hard Steel】 Made of extremely hard stainless steel with high strength and hardness for durability, anti-rust and anti-corrosion. It can....
【Safe and Efficient】The high strength and hardness deburring external chamfer tool easily shave down the outer edges of a bolt, pipe or rod,....
【Repair Damaged Threads】Hardened steel external deburring tool quickly repairs damaged threads on steel bolts including stainless steel and....
【Simple Operation】Attaching the deburring external chamfer tool to the end of your power drill, Use the lowest speed on the drill bit, and then....
【Widely Used】Compact size, you can carry the eliminate damaged extractor in your tool pouch and make hot forming tool. Fits size(approx.): 5/16″....

Check Stock

Aluminum Alloy Woodworking Square Size Measure Ruler, welltop 3D Mitre Angle Measuring Tool, Multifunctional 45/90 Degree Angle T Ruler Gauge, for Three Dimensional Items Measuring Timber, Pipes

...0° angle, ten common angles to meet your different needs..
【Tough & Durable Material】The 3D mitre angle measuring tool is made of high quality aluminum alloy material, high hardness, high toughness, non-toxic, rust-proof, durable and non-deformable, high-precision measurement and long life span. Compared with other plastic rulers, which is more durable and has higher accuracy..
【High Measurement Accuracy】Superb carftsmanship, square marking gauge, fine polishing surface, comfortable in your hand, and easy to use. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree or 90 degree angles. The measurement accuracy is 1mm. It can help you to improve working efficiency and save time with woodworking projects..
【Clear Scale】The multi-functional angle ruler with clear engraving metric scales, is easy to read and elegant in appearance. Compared with other plastic rulers, it is more accurate. The maximum measuring range is 155mm. Suitables for household woodworking DIY, very convenient to use and carry..

Check Stock

KHCRAFT Professional Caliper Vernier Caliper Stainless Steel Hardened Chromeplated Inch/Metric 0-6\/150mmx0.001\/0.02mm for Precision Measurements Outside/Inside/Depth/Step Packed in Storage Case

Made of real stainless steel hardened Chromeplated, fine ground and polished, each product has a serial number to control the quality.
Professional precision measuring tool for industrial use (particularly on metal workpieces), totally different from DIY hand measuring one (like any carbon steel caliper, which is not good to measure metal workpieces bacause of the low hardness).
What is the most important factor for a precision measuring tool? Accuracy! All our finished calipers are inspected piece by piece to control the accuracy +/-0.001"/0.02mm. Though digital calipers are easy to read because of the screen, machinic ones (vernier calipers) are more reliable! This is why vernier calipers and dial ones still exist after digital ones appeared..
4 ways to use: inside/outside/step/depth measurement, which almost meets all basic precision measuring needs.

Check Stock

Woodworking Edge Ruler, 0-70 Degrees Adjustable Protractor ,Multifunctional Construction Ruler, Angle Measuring Ruler,Thickness 1.5mm Approximately .(20in)

Ruler thickness 1.5mm approximately, much stronger than others(0.8mm typically).The ruler dial is made of plastic with good hardness. it has a long service life..
woodworking ruler is a multifunctional device for length measurement and angle drawing.this tool for every woodworkers and mechanics..
The protractor can be adjustable from 0 degree to 70 degrees and firmly locked every 5 degrees..
Loosen the nut first , adjust it to a suitable angle , and then tighten the nut to fix it at this angle . Pick up the stroke line , and then go to the next step ..
Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store..

Check Stock

Laser Measure atolla Laser Distance Meter 196Ft M/In/Ft up to 60m/±2mm Accuracy with Mute Function Waterproof IP54 Bubble Level LCD Backlit for Pythagorean Mode Measuring Distance Area Volume

【Various Measuring Modes from 0.15 to 60m】- The atolla Laser Measure Tool is an advanced measuring tool apply for indoor measurement as well as....
【Precise Measurement】- Thanks to the advanced laser technology, the measurement accuracy of +/- 2mm is achieved. The multi 4-line backlit LCD is....
【Extension Functions】- With this portable distance meter you can easily set up in meter/inch/foot. Up to 20 records can be saved and retrieved.....
【IP54 & Power Saving】- The housing of this high-quality laser measurement tool is made of robust PC and ABS plastic, which accounts for its....
【Easier & Compact】- The atolla Laser Measurement Tool provides an easier and faster way to meet the needs of precise measurements. Due to its....

Check Stock