ReviewsHardware Fasteners

Please Ring the Bell Aluminum Doorbell Sign Black and Golden 5.5x1.4 inch

  • A must have for any kind of door bell that help remind your guest.
  • Made out of 1/8" thick aluminum that won't break into pieces like those brittle plastics when screwing onto wall.
  • Package includes hardware fasteners save your time for going to hardware store.
  • Patent design, once mounted it will enduringly hold up outside in the weather.
  • Brushed finish letters instead of spray painted, well built to put by your entry door.
Check Stock

Prime-Line K 5031 Door Closer Jamb Bracket, Side Mount, Steel

  • Compatible with pneumatic door closer hardware and kits.
  • Ideal replacement bracket for commonly used side mount door closer hardware.
  • This jamb bracket hast a 2-7/8 in. reach.
  • Strong, durable design mounts with four fasteners onto the inner part of the door jamb, on the same side of the door hinges.
  • Easy to install in less than 30 minutes with a few simple tools.
Check Stock

Magpul Tejas Gun Belt Hardware Kit Fits 1.5 Inch Wide Belts Antique Silver

  • Using the same high-quality hardware that comes on our Tejas "El Original" Gun Belt, this hardware kit allows you to upgrade any belt that uses a....
  • Updated buckle design with a sleek profile that sits flat and minimizes printing for added comfort and quality to your belt.
  • Flat-sitting buckle for minimal printing that's compatible with a 1-1/2” belt.
  • Tool-free fasteners allow easy switch-out of buckles.
  • Features a custom buckle and screws with a brushed antique silver finish.
Check Stock

Black Chicago Screws, 72 Assorted Pieces of 1/4 & 3/8 Inch - for DIY Kydex and Leather Gun Holsters/Clips and Knife Sheaths, Includes Phillips Truss Heads + Open Slotted Fasteners + Rubber Washers

  • The best choice when it comes to DIY Kydex and Leather Holsters, Knife Sheaths, Belt Clips, or any other piece of tactical gear. Each pack includes 72 total pieces - 12 each of 1/4 and 3/8 inch sizes of Phillips Truss Heads, Open Slotted Post Fasteners, and Rubber Washers/Spacers.
  • EASY TO TIGHTEN – The open slotted fasteners are ideal because they allow for a tighter and more secure connection than non-slotted fasteners.
  • STRONG & DURABLE – Each piece of hardware is made of high carbon steel and coated with a high tech black thermochemical treating to harden it and give it a gun-like matte finish that eliminates any glare. The included washers are resistant to liquids and oils and are able to withstand extreme temperatures..
  • DIMENSIONS – 1/4" Phillips Screw Heads have a 3/8” outside diameter and 1/4" long threaded section with an 8-32 thread, 3/8" Phillips Screw Heads have a 3/8” outside diameter and 3/8" long threaded section with an 8-32 thread, Slotted Post Fasteners have a 7/16” outside diameter and 1/4" long threaded section, Rubber Washers have a 1/2" outside diameter..
  • 100% SATISFACTION GUARANTEED – We take great pride in our products and make sure that the highest quality standards are met by sending each product through a rigorous i....
Check Stock

Bikegear Hitch Mounted Bike Rack Storage |Wall Mount| Storage for Bike Hitch Rack 2\ and 1.25 \

  • Mounts on your wall with included hardware. The package includes 3 bolts, 3 washers and 3 fasteners..
  • Perfect for storing hitch racks (bike, ski, or cargo) inside your garage.
  • Constructed of solid steel and aluminium. Strong materials and construction allows you to securely wall-mount your hitch carrier and bikes..
  • Easy to install and easy to use. Package includes: Storage Rack Hitch Instructions Installation hardware. Weight capacity is upto 90 lbs..
Check Stock

Prime-Line MP17051 One-Way Barrel Nut, 10-24 x 5/8 in, Steel Construction, Chrome Plated, 25 Piece

  • These one-way barrel nuts are used together with one-way screws where tamper-proof installation of hardware is desired/required.
  • These tamper-proof barrel nuts measure 5/8 in. in length with #10-24 internal thread.
  • Designed for use with restroom partition hardware.
  • For further dimensional information, please see the line drawing.
Check Stock

SANKINS 14\ Gate Spring Self Closing Heavy Duty Outdoor Door Spring Automatic Metal Gate Closure Hardware with Adjustable Tool for Wooden and Vinyl Fence, Black

  • ...ing can adjust the spring tension by using the lock pin and regulator tool(included） to control the closing speed. Self-closing door spring is designed for closing gates or doors automatically to provide convenience and security..
  • 【Easy to Install】The door spring hardware kit includes mounting instructions and fasteners to help you install easily. Just fix one side of the spring on the post, and another side on the gate or door. NOTICE: Be careful not too tighten the screws if you are installing a vinyl fence..
  • 【Wide Application】 Adjustable fence gate spring hardware is suitable for outdoor vinyl door, agricultural fences, garden fences, shed, lawns, shacks, orchards, terraces, pools, square wood post and various wooden door. Whenever it provides convenience and a sense of security for you, and helps you close the door automatically..
  • 【Package Included】 The length of the self closing gate spring is 14". Including all fasteners and instructions, 1x 14" heavy duty spring door closer, 1x locating pins, 1x adjusting pin, 4x 1" screws, designed for both left and right side swing door, suitable for heavy and light operations..
Check Stock

Prime-Line MP17055 One-Way Shoulder Screws, 10-24 x 1-3/16 in, Steel Const, Chrome Plated, 25 Piece

  • These one-way shoulder screws are used with one-way barrel nuts where tamper-proof installation of hardware is required.
  • These tamper-proof shoulder screws have a 1-3/16 in. reach, with #10-24 thread and a 1/4 in. outside diameter shoulder.
  • Designed for use with restroom partition hardware.
  • For further dimensional information, please see the line drawing.
Check Stock

Chrome License Plate Screw Kit - Set of 8 Stainless Steel Fasteners for License Plates, Frames, and Covers on Domestic Cars, Trucks, Vans, SUVs - Rustproof, Self Tapping Mounting Bolts (Chrome Plated)

  • STAINLESS STEEL LICENSE PLATE SCREW KIT: This set of fasteners includes 8 chrome plated slotted hex-head screws with a 1/4 inch (.25") diameter and 3/4 inch (.75") long self tapping shank. They are perfect for the front or back license plate and frames or covers of most cars..
  • RUSTPROOF HARDWARE: We use rustproof marine grade type 316 stainless steel precision-made screws to make sure you never have to deal with unsightly rusty screws and rust lines on your license plates and frames. And you’ll never have to worry about these screws rusting in place..
  • EASY INSTALLATION: We designed these license plate mounting screws to be durable and easy to install. Simple screwdriver installation makes them easy to use for car enthusiasts and casual car owners alike. No special tools required..
  • BETTER COMPATIBILITY: Our license plate bolts work with any vehicle that uses a plastic or nylon receiver or retainer. These screws won't work with metal threaded holes, but fit most cars, trucks, SUVs, vans, RVs, and motorcycles..
  • HASSLE-FREE: We're an American based company dedicated to making hardware for your vehicle that lasts. If for any reason these aren't the right license plate fasteners for you, we will make it right..
Check Stock

175 PCS Wing Nuts Fasteners Butterfly Wing Nuts SAE Steel Wing Nut Assortment kit from #6 to 3/8’’

  • 【Range Application】Wing nuts fasteners suitable for places with high adjustment frequency, such as: industrial manufacturing, fast positioning clamps, musical instruments, machinery and equipment, communications equipment, hardware lighting, furniture decoration..
  • 【Material Detail】Butterfly wing nuts fasteners made by high quality carbon steel has high hardness, corrosion resistance, oxidation resistance, low temperature resistance..
  • 【Packing Detail】Butterfly wing nuts has a wing on each side that helps you to tighten the nut without tools, total 175 pieces 6 size in the nice strong transparent box..
  • 【Easy to Use】Smooth finish making using them easy on the fingers, no sharp edges, no burrs, tighten nicely, you do not have to worry about the rust issue..
  • 【CUSTOMER SERVICE】You are unsatisfied for any reason, return your goods with no questions asked and BUSY-CORNER STORE will provide a full refund..
Check Stock

Chrome License Plate Screw Kit - Set of 4 Stainless Steel Fasteners for License Plates, Frames, and Covers on Domestic Cars, Trucks, Vans, SUVs - Rustproof, Self Tapping Mounting Bolts (Chrome Plated)

  • STAINLESS STEEL LICENSE PLATE SCREW KIT: This set of fasteners includes 4 chrome plated stainless steel slotted hex-head screws with a 1/4 inch (.25") diameter and 3/4 inch (.75") long self tapping shank. They are perfect for the front or back license plate and frames or covers of most cars..
  • RUSTPROOF HARDWARE: We use rustproof marine grade type 316 stainless steel precision-made screws to make sure you never have to deal with unsightly rusty screws and rust lines on your license plates and frames. And you’ll never have to worry about these screws rusting in place..
  • EASY INSTALLATION: We designed these license plate mounting screws to be durable and easy to install. Simple screwdriver installation makes them easy to use for car enthusiasts and casual car owners alike. No special tools required..
  • BETTER COMPATIBILITY: Our license plate bolts work with any vehicle that uses a plastic or nylon receiver or retainer. These screws won't work with metal threaded holes, but fit most cars, trucks, SUVs, vans, RVs, and motorcycles..
  • HASSLE-FREE: We're an American based company dedicated to making hardware for your vehicle that lasts. If for any reason these aren't the right license plate fasteners for you, we will make it right..
Check Stock