ReviewsHardware Brackets Carbon Steel

Swing Set Anchor Leveling Kit :: Includes Four Large Molded Rubber Blocks with Stakes and Hardware for Installation :: Keeps Your Swing Set Safe and Secure While Protecting Wood from Ground Moisture.

  • Swingset Kit Includes Two A-frame Swing Set Brackets and Two Sets of A-frame Bracket Hardware, made of heavy gauge steel, solid welded joints, and a powder coated green finish will provide you with the brackets to build a top notch quality outdoor wooden swingset..
  • Each Jungle Gym Kingdom's welded, heavy- duty steel bracket is designed for two 4x4 treated posts, and one 4x6 treated post swing beam. These brackets include all wood screws and washers necessary to build your A-frame swingset. The hardware included is 3" galvanized lag screws and galvanized washers..
  • We recommend using only treated lumber (not included) to build your Jungle Gym Kingdom A-frame swingset. The lumber needed is 4 - 4x4 treated posts for the legs and 1 - 4x6 treated post for the top beam. Using only treated lumber with Jungle Gym Kigdom's heavy duty swing set brackets will ensure a top quality swing set to enjoy..
  • Jungle Gym Kingdom's brackets come with pre-drilled holes, and each Jungle Gym Kingdom steel bracket weighs approximately 10 pounds for maximum stability. Do not force lumber into the bracket, it should slide into the bracket with little force. If your treated lumber is still wet and swollen, it may create a tight fit in the bracket. If your treated lumber is dry, the ....
Check Stock

ZeHuoGe Car Awning Mounting Hardware Kit Universal Mounting Hardware Bracket Accessories Replacement for Car Awning Shelter

  • - Application - Universal awning mounting hardware kit is designed to replace old hardware kit or add necessary accessories for mounting and fixing car awning on the roof rails.
  • - Great Compatibility - Compatible for most car roof rails and car awnings, just make sure the rail width is smaller than the bracket screw-hole spacing of 3 3/4".
  • - Strong Stainless Steel - Made of sturdy 201 stainless steel, brackets and screw kits are rust-resistant and corrosion-proof, durable for outdoor use.
  • - Easy to Install - Just install 2 pairs of brackets on the roof bar of your car with long screw kits, slide the short screws into the grooves of car awning and fix the awning on the brackets with nuts.
  • - Complete Accessory - Includes 2 L-shaped brackets, 2 I-shaped brackets, 2 ropes, 2 wrenches, 2 stakes, 4 long screw kits, 4 short screw kits and 1 cloth bag.
Check Stock

Orbeto Heavy Duty (1/4”) Floating Shelf Brackets (6 Pack) Metal Black,Holds 160+lb, Powder Coated, Complete Mounting Hardware, Easy Install with Clear Instructions, Choose 6,8,10,12" (6 inch-6 Pack)

  • ...pecial bracket design makes them disappear when in everyday use. You get a true floating shelf experience. Powder Coated to prevent damp air from deteriorating the metal. Will look good and work well for decades of better organization and attractive display..
  • [INCLUDES ALL HARDWARE FOR IMMEDIATE INSTALL (NOT INCLUD BOARDS)] - Heavy duty carbon steel screws with super silicone dry wall anchors to achieve strong grip on any surface. Note the countersunk screw holes that hide the screw inside for a neater, more professional look..
  • [NO INSTALLATION EXPERIENCE NEEDED] – We made a special kit anyone can install with no experience. The detailed illustrated installation instructions are easy to follow. We also include a handy spirit level to ensure your brackets are straight for a level shelf..
  • [120 DAY REFUND] – Enjoy lifetime durability with 100% money back refund for 120 days. Many people are stocking up with several in the various lengths to fully outfit their home and business..
Check Stock

Eastern Jungle Gym Easy 1-2-3 A-Frame 2 Brackets for Swing Set with All Mounting Hardware, Green

  • Includes 2 (TWO) A-Frame Swing Set Brackets and 2 (TWO) sets of A-Frame Bracket Hardware – EVERYTHING you need to construct a Free-Standing A-Frame Swing Set.
  • Our brackets are a solid, one-piece design, open-ended and constructed with heavy-duty steel and welded seems for the strongest and safest construction.
  • Brackets are finished in a power-coated green color and Eastern Jungle Gym's signature yellow tag to ensure 100% authenticity and our warranty.
  • Includes all hardware needed to build a DIY A-Frame Swing Set. We provide all the hardware needed to install both swing set brackets (28 – 5/16" x 3" zinc-coated steel lag bolts and 28 – washers).
  • Lumber is not included in this kit. We recommend using one 4x6 120" top beam (3.5" x 3.5" x 120") and four 4x4 96" (3.5" x 3.5" x 96") side support legs to construct a basic A-Frame with the finished dimensions of 12'Lx8'Dx7'8"H.
Check Stock

WINSOON 11FT Sliding Bypass Barn Wood Door Hardware 8 Rollers Kit System Bending Design Wall Mount Bracket Fit 4 Wooden Doors (11FT)

  • [HARDWARE MATERIAL] – WINSOON 4 doors bypassing hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardware and fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 9 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (4x 5.5FT Rails,2x Junction Plate,8x Hangers,16x Rail Supports,8x U Brackets,4x Door Stops,8x Anti-jump Pas, 4x End Caps,4x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware is included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 11FT bypass barn door hardware can be used for two 31"-....
Check Stock

ZEKOO 12 FT 4 Doors Bypass Barn Door Hardware Four Rollers Style Kit

  • 【Double Track Bypass】Barn doors double track bypass hardware kit is low ceiling design, only need 9 inch ceiling space from top of the door to ceiling.
  • double track bypass hardware kit offer a smart solution than the single track bypass, double track can let each barn door silde on each track where you want, they will not have too much overlap between, it can let your openings show maximum display in the same length track, the two barn doors slide independently without affecting each other..
  • 【Why Choice Our Sliding Bypass Hardware】1.Roller Bearing is high purity bearing steel Gcr15, made of reinforced steel and electrophoretic, ring fixed structure and external dust cover, prevent steel ball from leaving the locus and oil leakage, keep roller lifetime lubricated.
  • Passed the test of opening - closing for 160000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 2.The rail is Pre-drill 16" apart hole on rail to line up standard studs..
  • 【Heavy duty construction ensures safety】Material thickness up to 1/4 inch (6.3cm) Solid carbon steel (High Standard Q235), multiple high temperature fine electrostatic powder spraying process black frosted, corrosion protection, antirust, anti-scratch. 8.8 grade Self-tapping a....
Check Stock

AWX Heavy Duty Shelf Brackets 12 inches x 8 inches with Screws - 8 Pack Black Metal Shelf Brackets - Shelf Support Angle Brackets for Shelves - L Brackets Heavy Duty Floating Shelf Brackets

  • ...ed mounting a metal 90 degree bracket has never been easier. Measuring 8 black shelf brackets 12 inches x 8 inches gives flexibility when deciding whether to use these corner brackets to make several small metal shelves or a large wall shelf..
  • Multiuse Shelf Options - With 8 hidden shelf brackets this floating shelf hardware can be utilized all over the house. Whether being used as decorative shelf brackets, open shelving for kitchen, bookshelf brackets, small metal shelf bracket, or even general shelving brackets the uses for these shelf mounts are endless..
  • Sturdy And Durable - Heavy duty wall shelves need to be with strong shelf brackets and our metal brackets are exactly that. Securely mounting shelf brackets & supports with screws to any surface gives peace of mind that our shelf support brackets will hold up to 600lbs..
  • Premium Quality Materials - Enjoy an industrial forged steel floating shelf with our 8 heavy duty wall shelf brackets. With all heavy duty L brackets, quality shelf hardware is our top priority with wall brackets for shelves made of high quality steel with a black coated finish..
  • AWX Promise - At AWX we stand by our products and offer a 31 day no questions asked promise if you experience any issues with your AWX product and you will....
Check Stock

WINSOON 4FT-16FT Metal Sliding Bypass Barn Wood Door Hardware Kit System Bending Design Wall Mount Bracket Fit Double Wooden Doors (4FT)

  • [HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (2x 4FT Rails,4x Hangers,6x Rail Supports,3x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 4FT bypass barn door hardware can be used for two 20"-24" wide doors. Fit 1-3/8" to ....
Check Stock

WINSOON 4FT-16FT Metal Sliding Bypass Barn Wood Door Hardware Kit System Bending Design Wall Mount Bracket Fit Double Wooden Doors (5FT)

  • [HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (2x 5FT Rails,4x Hangers,8x Rail Supports,4x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 5FT bypass barn door hardware can be used for two 26"-30" wide doors. Fit 1-3/8" to ....
Check Stock

WINSOON New Bending Room Wall Mount Bypass Double Black Sliding Wood Door Roller Hardware Track Pulley Folding Steel Kit (6FT / Two Door Set)

  • [HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (2x 6FT Rails,4x Hangers,10x Rail Supports,5x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 6FT bypass barn door hardware can be used for two 32"-36" wide doors. Fit 1-3/8" to....
Check Stock

Winsoon 16FT Sliding Bypass Barn Door Hardware Kit for Double Wooden Doors, Low Profile, Overlapping Tracks, Heavy Duty, 5-16FT for Choose

  • [HARDWARE MATERIAL] - WINSOON barn door hardware is made using premium carbon steel. High quality steel with frosted black surface makes it heavier than other sliding barn door hardwares amd fire proof, water proof and rust proof. It also allows you to install your barn doors interior and exterior..
  • [EASY TO INSTALL] - This hardware requires at max 2 people. Super detailed installation manual included that the measurements are all in inches. All tracks can be connected with other tracks with a junction plate. Professional customer service team help you solve all installation problems in time, accept custom-made barn door hardware. THE CLEARANCE from the top of your door to the ceiling should be at least 8 inch to install the bypass barn door hardware..
  • [PACKAGE INCLUDED] - A Barn Door Hardware Kit (4x 5FT+2x 6FT Rails,4x Junction Plate,4x Hangers,26x Rail Supports,13x U Brackets,4x Door Stops,4x Anti-jump Pas, 4x End Caps,2x Floor Guides,1x Hex Key. The rail is pre-drilled holes for 16 inches wall studs. Rail and hanger arms are 1-9/16" wide and 1/5"thick. All other necessary hardware are included as you see in the pictures. * DOOR NOT INCLUDED.
  • [DOOR WEIGHT CAPACITY] - Max 230 lbs per door. This 16FT bypass barn door hardware can be used for two 92"-96....
Check Stock