ReviewsHardwood Filament

Shiny Silk Gold Silver Copper PLA Filament Bundle, 1.75mm 3D Printer Filament, Each Spool 0.5kg, 3 Spools Pack, with One 3D Printer Remove or Stick Tool MIKA3D

  • ✔GLOW PLA FILAMENT - Contains 20% glow powders that glow in the dark after absorbing light energy. Exposure to the strong sunlight or UV light for only 30 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect, then glow blue filament, glow deep blue purple filament, shiny glow green filament, glow red filament, glow pink filament.
  • ✔UPGRADE GLOW FILAMENT - AMOLEN Specializes in researching Glow in the Dark Filament, using the most advanced Glow materials, PLA raw materials come from USA. All the glow filaments on the market are a bit brittle, please print with patience and keep the angle smooth when feeding.
  • ✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
  • ✔GIFT FOR KID - When not glow, the filament shows white and clear, which is very suitable for painting. Your child can paint it with any colors. It will stimulate children's imagination, creativity and practical ability. AMOLEN Glow pla filament is a wonderful gift for children..
Check Stock

SUNLU 250g PETG Filament 1.75mm Bundle, 3D Printer Filament, Toughness PETG Filaments, Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls, Black+White+Grey+Transparent+Blue+Green+Red+Orange

  • ① 【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use..
  • ②【SUNLU PLA 3D Printer Filament】PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use..
  • ③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers..
  • ④【Filament Spool Diameter】Spool Diameter: 8.00″, Spool Width: 2.50″, Spool Hub Hole Diameter: 2.20″. The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers..
  • ⑤【Recommend Settings】We recommend printing the PLA filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s..
Check Stock

Inland Glass PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Transparent Glass Filaments, Yellow Glass

  • GLASS PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • GLASS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 190°C - 210°C (374°F - 410°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND GLASS PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Glass PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland Glass PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • HIGH-QUALITY GLASS PLA: Glass PLA filament is non-toxic, the mater....
Check Stock

SUNLU ASA Filament 1.75mm UV/Rain/Heat Resistant Tough 3D Printer Filament Great for Printing Outdoor Functional Mechanical Parts 1kg Spool 2.2lbs 395 Meters Red

  • ① 【SUNLU ASA 3D Filament】ASA filament is kind of very strong and tough filament, stronger than PLA filament and ABS filament. No clog, no....
  • ②【Super Neat Filament Spool】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is....
  • ③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable....
  • ④【Recommend Settings】We recommend printing at a nozzle temperature of 230-260°C(446-500°F), bed temperature of 80-120°C(176-248°F), printing....
  • ⑤【UV/Rain/Heat Resistant】SUNLU ASA 3D printing filament is great for printing outdoor functional mechanical parts, UV/Rain/Heat highly....
Check Stock

Inland PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03mm - 1kg Cardboard Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free Filaments - Black

  • PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA....
Check Stock

Inland PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03mm - 1kg Cardboard Spool (2.2 lbs) – Fits Most FDM/FFF Printers – Odor Free, Clog Free Filaments - Purple

  • PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 215°C - 230°C (419°F - 446°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print..
  • EASY-TO-USE: The Inland PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back..
  • NEW CARDBOARD SPOOL: PLA filament is non-toxic and comes with a cardboard spool. PLA....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Black

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Orange

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Green

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

Inland 1.75mm ABS 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm - 1kg Cardboard Spool (2.2 lbs) - Fits Most FDM/FFF Printers - Blue

  • ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
  • ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240°C - 260°C (464°F - 500°F) Recommended Bed Temperature: 80°C - 110°C (176°F - 230°F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm).
  • INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc..
  • EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do....
Check Stock

AMOLEN PLA 3D Printer Filament, PLA Filament 1.75mm Silk Black Shiny Red Gold Filament, 3D Printing Filament 1KG/2.2lb

  • 【PLA Filament Silk Shiny】- High quality Silk PLA Filament with Silk Black & Shiny Red Gold 3 colors changing. PLA Filament normally around 15-18 meters change color and is excellent for the larger prints to show all colors. The red gold color with shining dots and has shiny appearance, the silk black filament has outstanding silky glossy smooth..
  • 【Premium Quality】- AMOLEN Silk PLA filament Raw materials are from USA. Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. AMOLEN filament, which have premium quality, print Much More Smoothly..
  • 【Clog Free & Print Smoothly】- AMOLEN high quality Silk PLA filament is tangle & clog free. Printing Temperature 200-220℃.
  • Printing Bed (Optional) 0-50℃；Printing speed: 30-60mm/s. NOTE: Please pass the filament through the fixed hole to avoid tangles after use..
  • 【High Compatibility】- AMOLEN Silk PLA Filament is perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, DO3D, MYNT3D, 3Doodler etc. NOTE: Please pass the filament through the fixed hole to avoid tangles after use..
  • 【Reusable Vacuum Bag & After-sales Service】 -- Vacuum packaging....
Check Stock