ReviewsHarness Lanyard

Mophorn Boat Throttle Control 881170A15 Mercury Single-Engine Control with 8 Pins Side Mounted Outboard Control Box with Emergency Lanyard

  • ... a forward gear, and pulling the lever back from neutral engages the reverse gear. The engine will continue to run at idle until the lever is moved about 32°. Then, move the control lever farther to open the throttle, and the engine will begin to accelerate..
  • Durable Trim Harness: The control cable features high-temperature resistance, thermoplastic insulation and remarkable color coding. The harness contains a 9-core plug connector to engine and trim/tilt switch connector. 15FT long cord facilitates remote power use..
  • Emergency Lanyard Cord: This engine security switch lanyard lord is made of high quality woven nylon fiber, which provides security and durability. The lanyard lord is extendable and flexible, the premium plastic ring clip is used to insert into the flameout switch, and the ABS plastic spring buckle hook is to connect with the operator, preventing the operator falling or leaving the helm..
  • Reasonable Designs: The outboard remote control's structure is very stable and practical. There is neutral lock lever, neutral throttle lever , friction adjustment knob, trim and tilt switch, a control lever for smooth rev....
Check Stock

KwikSafety (Charlotte, NC) PYTHON 1 PACK (External Shock Absorber) Double Leg 6ft Safety Lanyard OSHA ANSI Fall Protection Restraint Equipment Snap Rebar Hook Connectors Construction Arborist Roofing

  • ...ertified and have a gate strength of 3,600 lbs each! The attached yellow webbing in this polyester lanyard supports 130-310 lb users and has an immense tensile strength of 5,000 lbs! This fall restraint lanyard is constructed to be lightweight and flexible on your body, which makes it easy to connect to your safety harness and designated roof anchor..
  • VERSATILE - Utilize this positioning lanyard (not adjustable) with any compatible products in a fall protection system such as: safety harnesses, roof anchors and d-ring extenders. The features of this industrial roof lanyard reinforce the safety and security you'd want to have in the event of a fall. Supporting an average arrest force of 900 lbs, this safety lanyard will keep you safe! Perfect if you are in need of a scaffold lanyard, or you often work on a ladder, or are climbing on a roof!.
  • ANSI TESTED & OSHA COMPLIANT - We provide a safety lanyard that is quality checked and tested by an accredited, 3rd party testing lab while other safety companies do not.
  • its buyers beware. This roofing safety lanyard is in full compliance with ANSI Z359.13-2013 and serves as ideal guardian protection for projects where OSHA compliance is required. This energy absorbing lanyard can be used as a lanyard construc....
Check Stock

Mophorn Boat Throttle Control 881170A3 Boat Control Box with 8 Pins Outboard Control Box with Emergency Lanyard Side Mount fit for Mercury Engine

  • ...forward from the neutral position can engage a forward gear, and pulling the lever back from neutral engages the reverse gear. The engine will continue to run at idle until the lever is moved about 32°. Then, move the control lever farther to open the throttle, and the engine will begin to accelerate..
  • Durable Trim Harness: The control cable features high-temperature resistance, thermoplastic insulation and remarkable color coding. The harness contains a 9-core plug connector to engine and tachometer/neutral switch connector. 15FT long cord facilitates remote power use..
  • Emergency Lanyard Cord: This engine security switch lanyard lord is made of high quality woven nylon fiber, which provides security and durability. The lanyard lord is extendable and flexible, the premium plastic ring clip is used to insert into the flameout switch, and the ABS plastic spring buckle hook is to connect with the operator, preventing the operator falling or leaving the helm..
  • Reasonable Designs: The outboard remote control's structure is very stable and practical. There is neutral lock lever, neutral throttle lever, friction adjustment knob, a control lever for smooth reverse and forward, and various accessories are also provided to complete the work efficiently..
Check Stock

KwikSafety (Charlotte, NC Hurricane Safety Harness [Premium Padded Back Support] ANSI OSHA Full Body Fall Protection Equipment Construction Tower Climbing Roofing Forklift Aerial Boom Scissor Lift

  • 3 HEAVY DUTY D-RINGS | CUSHIONED BACK SUPPORT - The KwikSafety HURRICANE is a premium, durable, high performance full body harness that meets & exceeds ANSI/ASSE Z359.11-2014 standards. Our safety harness fall protection features: (2) hip d-rings & (1) dorsal d-ring for primary fall arrest attachment, travel restraint & rescue. (1) cushioned back support pad, (4) pass-through buckles to ensure proper fit, & premium stitched load bearing straps made from pure, non-recycled synthetic material..
  • ADJUSTABLE STRAPS & BUCKLES - Fall arrest harness d ring harness made of 100% polyester quality stitched yellow & black aerial lift harness straps. Correct fitting construction harness is essential for proper performance for men & women. Supports users within the capacity range of 130-310Ibs (59-140kg), 4'10"-6'6" (147-198cm). To ensure your fall arrest safety harnesses fit properly, see that all buckles are connected, leg & shoulder straps are snug & chest straps are in the center of the chest..
  • OSHA APPROVED SAFETY HARNESS - The best construction body harness for those who need safety first but want premium product & style. Fall protection body harness men ideal use: construction harnesses, climbing harness, ironworkers harness, roofing harness, construction har....
Check Stock

KwikSafety (Charlotte, NC TYPHOON Safety Harness [KIT] Premium Back & Shoulder Padding ANSI OSHA Full Body Fall Protection Work Equipment Construction Tower Climbing Roofing Aerial Boom Scissor Lift

  • ...ertified and have a gate strength of 3,600 lbs each! The attached yellow webbing in this polyester lanyard supports 130-310 lb users and has an immense tensile strength of 5,000 lbs! This fall restraint lanyard is constructed to be lightweight and flexible on your body, which makes it easy to connect to your safety harness and designated roof anchor..
  • VERSATILE - Utilize this positioning lanyard (not adjustable) with any compatible products in a fall protection system such as: safety harnesses, roof anchors and d-ring extenders. The features of this industrial roof lanyard reinforce the safety and security you'd want to have in the event of a fall. Supporting an average arrest force of 900 lbs, this safety lanyard will keep you safe! Perfect if you are in need of a scaffold lanyard, or you often work on a ladder, or are climbing on a roof!.
  • ANSI TESTED & OSHA COMPLIANT - We provide a safety lanyard that is quality checked and tested by an accredited, 3rd party testing lab while other safety companies do not.
  • its buyers beware. This roofing safety lanyard is in full compliance with ANSI Z359.13-2013 and serves as ideal guardian protection for projects wher&#....
Check Stock

KwikSafety (Charlotte, NC) HURRICANE Safety Harness [4 PACK] Premium Padded Back Support ANSI OSHA Full Body Fall Protection Equipment Construction Tower Climbing Roofing Forklift Aerial Boom Scissor

  • 3 HEAVY DUTY D-RINGS | CUSHIONED BACK SUPPORT - The KwikSafety HURRICANE is a premium, durable, high performance full body harness that meets & exceeds ANSI/ASSE Z359.11-2014 standards. Our safety harness fall protection features: (2) hip d-rings & (1) dorsal d-ring for primary fall arrest attachment, travel restraint & rescue. (1) cushioned back support pad, (4) pass-through buckles to ensure proper fit, & premium stitched load bearing straps made from pure, non-recycled synthetic material..
  • ADJUSTABLE STRAPS & BUCKLES - Fall arrest harness d ring harness made of 100% polyester quality stitched yellow & black aerial lift harness straps. Correct fitting construction harness is essential for proper performance for men & women. Supports users within the capacity range of 130-310Ibs (59-140kg), 4'10"-6'6" (147-198cm). To ensure your fall arrest safety harnesses fit properly, see that all buckles are connected, leg & shoulder straps are snug & chest straps are in the center of the chest..
  • OSHA APPROVED SAFETY HARNESS - The best construction body harness for those who need safety first but want premium product &....
Check Stock

Garmin Backpack Tether Accessory for Garmin Devices

  • Compatible with the following Garmin Series: eTrex 10,20,30-Oregon-Dakota-GPSMAP 62DescriptionThe Backpack Tether features a durable nylon harness wrap with hook-n-loop attachment that can accommodate any style of shoulder strap with widths up to 3.75-Inch and is Modular Lightweight Load-carrying Equipment (MOLLE) compatible. When the device is detached from the hook-n-loop, the spine mount and adjustable (from 2-Inch to 14-Inch) lanyard cord ensure the device will stay with you at all times..
Check Stock

KwikSafety (Charlotte, NC) TSUNAMI COMBO (Premium BRAIDED ROPE) Vertical Lifeline Rope, 1-D Ring Safety Harness, Lightweight Tool Lanyard ANSI OSHA Fall Protection System Safety Equipment | 50 FT.

  • ...n & standard use, making this roof rope more flexible, sturdy & long-lasting. Features a hardened, plastic thimble for greater strength & includes a 100% polyester shock protection absorber enclosed in a PVC cover that will deploy in the event of a fall..
  • PROPER FIT, PROPER PERFORMANCE - Our TORNADO full-body safety harness is fully equipped w/ (1) dorsal d-ring that functions as the primary fall arrest attachment, travel restraint & rescue. The construction harness has load bearing straps made from pure, non-recycled synthetic material that is water repellant, has superior stitching & resistant against ageing, heat & abrasion. Ensure a safe & proper fit with (3) pass-through buckles located on the hips, chest and legs of the harness..
  • SAFETY TOOL LANYARD - The KwikSafety TENTACLE tool lanyard is designed for light duty uses, namely hand tools & smaller power tools. The lanyard has a durable bungee strap that is strong enough to keep tools on your belt! It includes a cord stopper that has a durable rubber base to secure tools to your hip or wrist. The anodized aluminum carabiner is a quick snap clip attachment. The Tentacle is third party tested to a max capacity of 10lbs, resting length is 3ft & activated length is about 5ft..
Check Stock

KwikSafety (Charlotte, NC) Gibbon Grip 3 ft Safety Anchor Cross Arm Strap Beam Choker ANSI Fall Arrest System Web Pass Thru Double D Ring Anchorage Sling OSHA Protection Harness Lanyard

  • ESSENTIAL IN YOUR FALL ARREST SYSTEM – The GIBBON GRIP cross arm strap is a premium fall protection anchor strap (not adjustable/retractable) w/ a large Double D ring Connector. The easy connection to hooks, fall protection harness, lanyards & heavy duty straps makes this the perfect addition to your safety harness fall protection kit! These are 10 foot long pass through web anchors and the Max. Capacity is 310lbs w/ a minimum breaking strength of 5000lbs..
  • COMMERCIAL OR RESIDENTIAL – The KwikSafety GIBBON GRIP is a versatile tool that can be used for small or heavy duty jobs. This safety anchor is functional whether the job is residential, commercial, or even industrial markets such as construction, roofing, aerial lifts, scaffolding, fall protection kits, guardrails, lanyard extension or anchor to a beam, swing hanging, tree trimming, arborist, and many more! You can be sure the Gibbon Grip cross arm strap will help you get the job done, be safe!.
  • ANSI TESTED BY 3RD PARTY (Unique to KwikSafety Products) – The KwikSafety GIBBON GRIP is tested to the most current standard, ANSI Z359.18.2017. The Anchor tie off may be used in horizontal or vertical applications and is a Polyester web pass thru reusable anchorage connector designed to wrap around a....
Check Stock

KwikSafety (Charlotte, NC) GATOR BUNDLE | Roof Anchor 50’ VLA 6’ Safety Lanyard Cross Arm Strap 1D Ring Full Body Safety Harness Tool Lanyard ANSI Tested OSHA Fall Protection Arrest Equipment Roofing

  • KWIKSAFETY COMPATIBLE: The KwikSafety GATOR is a hinged roof anchor ideal for residential and commercial roof work. It is compatible with any hook and all KwikSafety harnesses, lanyards, or self retracting lifelines. The GATOR is a temporary roof anchor bracket that can be used on wood and metal roofs. With no screws, nails, or fasteners included, the GATOR has 16 holes on each side (32 total) for wood truss attachment or steel roof anchorage. The GATOR is an essential part of any roofers tools!.
  • PREMIUM BRAIDED ROPE (Better Than Twisted Rope!): Durable vertical lifeline rope/lineas vida made of yellow & black quality interlaced 100% polyamide fall protection rope. The braided design makes it stronger & more resistant against abrasion & standard use, making this roof rope more flexible, sturdy & long-lasting. Features a hardened, plastic thimble for greater strength & includes a 100% polyester shock protection absorber enclosed in a PVC cover that will deploy in the event of a fall..
  • HEAVY DUTY D-RINGS: Our fall arrest harness is fully equipped with a (1) Dorsal D-Ring on the back, that functions as the primary fall arrest attachment, travel restraint, and rescue. The construction harness has load bearing straps, made from pure, non-recycled synthetic ....
Check Stock

WELKFORDER 3D-Rings Industrial Fall Protection Safety Harness Kit With Double Leg 6-Foot Shock Absorber Stretch Lanyard ANSI Compliant Personal Fall Arrest System(PFAS)

  • WELKFORDER Full Body Harness Kit have the fully passed test report in accordance with ANSI/ASSE Z359.11-2014 & ANSI Z359.13-2013. Applied to Construction,Roofing, Camping, Window cleaning, and Surveyor etc. Packed in high-quality Oxford Storage Bag..
  • WELKFORDER Full Body Harness Kit are used for fall arrest, travel restraint, suspension applications. When supported by the dorsal attachment during a fall, the design of our Full Body Harness directs load through the shoulder straps supporting the user, and around the thighs. The Shock Absorbers have a maximum deployment distance of 48 inch/1.2m & average arresting force 900lbs after a fall occurred. Each of our harness kit is Individually inspected..
  • WELKFORDER Full Body Harness has one dorsal D-Ring with Min. Breaking strength 5000lbs/22KN. Five Adjusting mating buckles with stamping steel material are of Min. Breaking strength 4000lbs/18KN. Snap & Rebar Hooks used on Shock Absorber Stretchable Lanyard are self-locking with minimal tensile break strength of 5,000 lb. and a 3,600 lb. gate rating. All Metal Components are ANSI/ASSE Z359.12-2009 Compliant provide both premium comfort and safety..
  • WELKFORDER Full Body Harness Kit Webbing is made from pure, non-recycled synthetic material having the stre....
Check Stock