ReviewsHarp Fitter

7 8 9 10 inch Lamp Shade Harp Holder,Adjustable Lamp Harp Kit,Fit 3/8 IP Standard,E14,E26,E27 Light Base UNO Fitter Adapter,Black Horn Frame Lampshade Bracket (Black)

【Multi purpose Harp】7 "8" 9 "10" level 4 adjustable - this light harp is 7-10 inches long, suitable for 7 "- 10" high lampshade. The frame support is suitable for most parts of the spider lampshade, and does not need to measure the length of the lampshade, so it can meet the requirements of different heights, and can be adjusted according to the needs..
【Suitable for】E26 and E27 light holder converter, detachable light harp. Equipped with standard 3 / 8 uno fitter adapter, it can be used with old desk lamp. Equipped with E14 plastic converter (white plastic part), you can easily convert E27 to E14 with E14 converter..
【GENEROUS STRUCTURE】The top screws are 3/5'' & top of harp accepts standard 1/4-27 threaded finials and cap knob finial is included in this set.The lamp harp holder is made of metal that can prevent lamp harp from getting rust. Standard Saddle Base Slips 1/8 IPS (3/8" diameter) lamp thread.
【Strong and durable】the harp and bow are made of heavy metal and firmly installed..
【Note】 before purchase, please make sure your bulb base is E26 / E27 with collar (as shown in the figure), which is used for spider lampshade.

Check Stock

Gold Medium Rectangular Lamp Shade 14\ Wide x 8\ Deep x 10\ High (Spider) Replacement with Harp and Finial - Springcrest

Rectangular lamp shade from Springcrest Collection..
Sheer gold polyester fabric with white polystyrene liner. Rolled trim..
Polished brass finish spider fitter. 1/2" drop..
8" harp is included. The correct size harp and a finial are included free with this shade..

Check Stock

Yacal Silver Medium Rectangular Lamp Shade 14\ Wide x 10\ High x 8\ Deep (Spider) Replacement with Harp and Finial - Springcrest

Rectangular lamp shade from Springcrest Collection..
Nickel finish spider fitter. 1/2" drop. 8" harp is included. The correct size harp and a finial are included free with this shade..

Check Stock

Wellmet 14\x14\x11\ inches Required Lampshade Assembly for Table Lamp ,Bedside Lamp,Floor Lamp,Fabric Drum Lampshade Classic Modern Style,Spider Fitter,Linen

NEED ASSEMBLE:Be Noted, Self Assembly Required,It will take about 10 minutes. If you can not accept self assembly,do not buy it..
MATERIAL: The ring is made of plastic but strong enough to support the lampshade.the cotton fabric materials which will provide good light for reading and relaxing..
SIZE:14 inches top diameter,14 inches bottom diameter,11 inches tall.
SPIDER FITTER：This lampshade can only be used on table lamps or floor lamps with harp support,Make sure your fixture is spider and has harp, otherwise you need to buy harp to use this shade.More details please watch the video..
Make sure your desired size:recommend measuring to your existing lampshade--a replacement harp may be needed for a proper fit or additional adjustment if changing height of shade..

Check Stock

Wellmet 16\x16\x12\ inches Lampshade Assembly Required for Table Lamp ,Bedside Lamp,Floor Lamp,Fabric Drum Lampshade Classic Modern Style,Spider Fitter,Blue

NEED ASSEMBLE:Be Noted, Self Assembly Required,It will take about 10 minutes. If you can not accept self assembly,do not buy it..
MATERIAL: The ring is made of plastic but strong enough to support the lampshade.the cotton fabric materials which will provide good light for reading and relaxing..
SIZE:16 inches top diameter,16 inches bottom diameter,12 inches tall.
SPIDER FITTER：This lampshade can only be used on table lamps or floor lamps with harp support,Make sure your fixture is spider and has harp, otherwise you need to buy harp to use this shade.More details please watch the video..
Make sure your desired size:recommend measuring to your existing lampshade--a replacement harp may be needed for a proper fit or additional adjustment if changing height of shade..

Check Stock

7 8 9 10 inch Lamp Shade Harp Holder,Adjustable Lamp Harp Kit,Fit both Standard Lamp Rod and E26 Light Base UNO Fitter Adapter,with 2 Shade Attaching Finial Top,Black Horn Frame Lampshade Bracket

ALL-PURPOSE HARP- 7" 8" 9" 10“ 4 LEVELS' ADJUSTABLE- This lamp harp measures 7-10 inches in length and suit for lampshade 7"-10" tall. The frame bracket fits most parts of spider lamp shade without measuring the length of lamp shade.
SOLID AND STURDY -Both harp and finial are with heavy duty metal,sturdy for installation. The surface is treated with nice chrome looking finish,rust-proof and has longer lifespan.
COMPLETE LAMP HARP SET AND MORE- Detachable Pratical Spare Parts include an adjustable harp,two harp holder(saddle and E26 screw base uno fitter), finial and one spare part of heavy ball screw on top.
HEAVY BALL FINIAL INCLUDED- The kit include a spare ball black finial which improve the appearance of your lamp and meet your replacement use. Heavy metal and dismountable thread rod could be use as curtain rod finial.
EASY TO ADJUST AND WIDE APPLICATION which is quite helpful for the variety of lamp shades.Making an older lamp look new,using with old desk lamps,shades replacement etc.

Check Stock

8Inch Lamp Shade Harp, Heavy Duty Lamp Harp Adapter Polished Brass Plated Lamp Shade Parts, Lamp Shade Harp Holder with Light Base for Table and Floor Lamps, Detachable Parts 1-7/16\(36MM)

【8inch Lamp Harp Holder】The lamp shade harp holder size: 8.1inch/20.5cm in height, internal diameter : 1-7/16 inch (3.6Cm), suitable for E26 lamp holder converter detachable lamp Harp.
【Wide Application】The lamp shade holder replacement is equipped with the standard 3/8 UNO fitter adapter and can be widely used on table lamps and floor lamps in home, office, restaurant, coffee shop.
【High Quality】The lamp shade holder replacement is made of metal with brass polished surface, rust resistance and wear resistance, durable and long lasting.
【Heavy Duty Structure】8” lamp harp holder with the U-shaped solid construction, not easy to bend, can be tightly fixed the lampshade.
the lamp harp have a small metal cap on the each end to prevent the harp from slipping off the socket, effectively protecting the bulb from damage.
【Easy to Install】Detachable lamp shade holders can be easily installed on the lamp holder to hold the lamp shade, and the shade holder is great for adding shine to the lamp or lighting.

Check Stock

Upgradelights Slip Uno Adapter Harp Converter Lamp Shade Uno Euro Fitter 1 9/16 Inner Diameter

Designed to fit directly over a plastic lamp socket (often found on lamps purchased at many popular retail stores)..
Adapter allows attachment to the harp. The opening on this adapter is 1 9/16 Inches. A plastic washer (ring) is needed to hold the adapter tightly in place..
Allows use of nearly any replacement lamp shade..
Provides an alternative to lampshades that have a fitter already attached..
Easily attach a harp to a lamp without one..

Check Stock

HomeConcept 140810RDWH Rectangular Drum Lampshade, White

Verify size for perfect fit: (8x14)" top x (8x14)" bottom x 10 inch slant height.
Standard washer filter: often called a "spider" Fitter, the shade will sit on top your lamp harp and is secured by a finial or cap..
ONLY THE BEST: Home Concept shades only use the finest materials, from fabrics to parchments to the reinforced, heavy-duty brass frames. We want your shades to last..
Professional designer quality: deluxe hardback lampshade, found in better Lighting Showrooms. Durable hotel quality shade.
Make sure to measure: for best fit, measure you existing shade before purchase. The third Dimension in the slant height of the whole shade, not the distance from bottom to Fitter.

Check Stock

Wellmet 13\x13\x10\ Lampshade Assembly Required for Table Lamp ,Bedside Lamp,Floor Lamp,Fabric Drum Lampshade Mid-Century Modern Style,Spider Fitter,Black Gold

NEED ASSEMBLE:Be Noted, Self Assembly Required,It will take about 10 minutes. If you can not accept self assembly,do not buy it..
MATERIAL: The ring is made of plastic but strong enough to support the lampshade.the cotton fabric materials which will provide good light for reading and relaxing..
SIZE:13 inches top diameter,13 inches bottom diameter,10 inches tall.
SPIDER FITTER：This lampshade can only be used on table lamps or floor lamps with harp support,Make sure your fixture is spider and has harp, otherwise you need to buy harp to use this shade.More details please watch the video..
Make sure your desired size:recommend measuring to your existing lampshade--a replacement harp may be needed for a proper fit or additional adjustment if changing height of shade..

Check Stock

6\ Regular Duty Detachable Polished Brass Plated Lamp Shade Harp with Saddle by Milton Douglas Lamp Co. 6 Inch Harp for Table and Floor Lamps, Includes Harp and Saddle (Base)

6" Height Measured From the Bottom of the Saddle to the Shade Rest on the Top of the Harp (see photo of how to measure a lamp harp).
For Use With Most 7" to 7-1/2" Tall Spider Style Lamp Shades with a 1" Fitter Recess (Again, see the photo on how to measure for your harp).
Beautiful Brass Plated & Lacquered Finish.
Accepts Standard 1/4-27 Threaded Finials (Not Included).

Check Stock