ReviewsHdd ssd Case

UGREEN USB C Hard Drive Enclosure USB C 3.1 Gen 2 to SATA Adapter for 2.5\ SATA SSD HDD 6Gbps High-Speed Support UASP SATA III Compatible with MacBook Pro Air WD Seagate Toshiba Samsung Hitachi

...d scratches. The 3 minutes Auto Sleep Mode helps to extend the lifespan of your hard drives. Comes with a detachable 50cm cable, it is quite flexible to connect and convenient to take along..
【Easy Installation HDD Enclosure】Plug and play with tool-free installation, no driver needed for this external hard drive case. Supports Windows/Mac OS/Linux systems, game consoles like Sony PS4/PS3/Xbox One, Smart TV, Router, etc. 【For the devices only with USB A port, please use your own USB C to USB 3.0 A cable】No request for extra power supply..
【Broad Compatibility 】Fit with most 2.5" SATA III / II / I HDD (Hard Disk Drive) & SSD (Solid State Drive) up to 6TB, compatible with WD Blue SATA PC HDD 2.5, WD GREEN 2.5 SATA SSD, Seagate Barracuda 2.5, Seagate FireCuda, Samsung 860 EVO/850 EVO SATA III SSD, SSD PLUS, Crucial BX500/MX500, Kingston A400 SATA SSD, TOSHIBA TR200, PNY CS900, DREVO X1, Integral, HITACHI..

Check Stock

SSD Bracket 2.5 to 3.5 Adapter, FXAVA SSD Mounting Bracke SSD Bracket 2.5 to 3.5 Adapter SSD HDD Metal Mounting Bracket Adapter Hard Drive Holder for PC SSD 2Pack

2.5" To 3.5" - 2.5" To 3.5" Mounting Adapter Bracket SSD Caddy, Support 2.5" hard drives (SSD and HDD) of laptop, compatible with SATA I, SATA II, SATA III..
SCREWS INCLUDED- 16 pcs(8pcs per adapter) screws included for each 2.5 to 3.5 bracket to ensure you can mount the bracket onto the PC case. 4 screw holes are designed on the SSD Bracket Mounting Adapter Bracket, which precisely corresponds to the 4 screw holes on the hard drive..
Easy to install 2.5" to 3.5" mounting adapter bracket. Suitable for HDD/SSD.
Metal Material- Our ssd mounting bracket is made of metal,which could strengthen the heat-sinking capability, so provides your hard drive a full protection..
Package Include: 2 x ssd mounting bracket 2.5 to 3.5 , 16x Screw.

Check Stock

PASOW 2.5'' 3.5'' to 5.25'' SSD HDD Mounting Bracket Internal Hard Disk Drive Bays Holder Adapter for PC

You can use it for 2 drives,2.5" SSD and 3.5" HDD.Allow to mount a 3.5 inch drive and a 2.5 inch drive (or a 8cm fan) to a 5.25 inch drive bay in your computer case at the same time..
Converts an available 5.25" HDD bay drive to accommodate 3.5" HDD or 2.5'' SSD (Solid State Drive)..
Compatible with any 2.5 or 3.5 inch IDE,SATA or SAS Hard Drive and Solid State Disk..
Mounting the 2.5'' drive firstly when you mount 3.5'' drive and 2.5'' drive at the same time,you can mount 8cm fan at the back if not mount 2.5'' hard disk..
Made of plastic body,quick and easy installation.

Check Stock

SSK Aluminum Hard Drive Docking Station, USB 3.0 to SATA Dual Bay External HDD Dock Caddy Reader for 2.5 & 3.5 inch SATA HDD SSD, with UASP Offline Cloner/Duplicator Function(2x16TB Supports)

Compatible with all 2.5 inch and 3.5 inch SATA I/II/III HDD SSD, USB 3.0 external hard drive dock, supports UASP and SATA 5Gbps for even faster data transfers. Plug and play, no driver needed. And LED indicator status display..
Support offline clone duplicator function, SSK HDD enclosure can support 2x16TB hard drive simultaneously for 2.5/3.5 inch SATA I/II/III HDD/SSD, which can be used to clone an existing hard drive without connecting to a computer, easy to duplicate data from one to another hard drive..
Solid, shockproof & vibration-resistant aluminum case, this external SATA HDD/SSD boasts efficient Heatsink to stay cool with low power consumption for reliable data transfers..
Multi-OS Compatible, Compatible with Windows XP / Vista / Windows 7 / Windows 8 / Windows 8.1 / Windows 10 and Mac IOS 10.4 to 10.11 Linux Kernel 2.4.2 or greater versions..

Check Stock

Sintech USB 3.0 External Enclosure Case for 18 Pin SSD from 2010-2011 MacBook Air A1369 A1370 1375 A1377 MC505 MC506

Alow 2010-2011 macbook air SSD to work as USB 3.0 external HDD case.
Support SSD from MACBOOK AIR 2010-2011 Year.

Check Stock

HornetTek USB 3.0 Dual Bay 2.5" HDD / SDD Enclosure w/RAID 0 & RAID 1

Support dual bay 2.5″ (Notebook Size HDD) SATA I / II / III HDD / SSD *****This unit does not support desktop size 3.5″ HDD*****.
SATA interface support SATAIII specification up to 6Gbps / USB 3.0 interface operates at Super Speed up to 5Gbps.
HDD configuration support : JBOD/ Normal/ Raid 0/ Raid 1 / 4 LED indicator for Power ON/Standby and two HDD activities.
Compact Design 5.25” x 2.05” x 3.55” with Aluminum case and 4CM cooling fan / Aluminum housing with metal internal hard drive tray.
1 Year Warranty from Manufacturer – HornetTek Customer Service Number: (855) 594-3816.

Check Stock

Geekworm T300 2.5 inch SATA SSD/HDD Shield Storage Expansion Board+T300 Metal Case Compatible with NVIDIA Jetson Nano Developer Kit(A02&B01)

Geekworm 2.5" SATA HDD/SSD storage board compatible NVIDIA Jetson Nano A02/B01/2GB/4GB that supports up to 4TB 2.5-inch SATA hard disk drives (HDD) or solid-state drive (SSD), User manual, refer to Geekworm WiKi search T300..
T300 Metal Case with Power & Reset Switch & Camera Holder Compatible with NVIDIA Jetson Nano Developer Kit (A02 & B01) and T300 2.5 inch SATA SSD/HDD Shield.
WiKi for reference: wiki.geekworm.com/T300.
A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down. THIS IS VERY IMPORTANT!! Strongly recommend ASIN: B07413Q5Y4.
Equipped with power switch and reset switch, and it's reserve the GPIO hole and the installation space of the fan, recommend to use this Noctua NF-A4x20 5V PWM fan, refer to ASIN: B071FNHVXN, you can also use this 5V 4007 cooling fan (ASIN: B07WNH6Y8Y ).

Check Stock

Geekworm Raspberry Pi 4 Dual SATA X883 V1.2 Dual 2.5 SATA HDD/SSD Expansion Board UASP Supported for Raspberry Pi 4 Model B

[Compatibility] For use with Raspberry Pi 4 Model B 1GB/2GB/4GB/8GB ONLY,compatible to use with X735(ASIN: B07R45W1LN) for power management function..
[HDD/SSD Requirements] Supports single or dual 2.5" SATA HDD/SSD working at the same time. The thickness of HDD/SSD does not exceed 11mm..
[Power Supply] Power supply: 5Vdc +/-5% , ≥4A.
Ensure use high quality PSU, recommend ASIN: B07413Q5Y4..
[Note] 1.As with all SSDs, new media must be formatted before use. 2.Not include Raspberry Pi, SSD/HDD or power adapter..
[User Manual] refer to Geekworm WiKi and search X883. Allows booting OS from your HDD/SSD for faster app opens, web server and file management..

Check Stock

ZRM&E 1 Set 2.5 to 3.5 Inch SSD HDD Holder Kit Metal Mounting Adapter Bracket Dock for Desktop PC SSD Server Hard Drive Tray + SATA 3.0 Cable + IDE 4P Male to SATA 15 Pin Female Power Extension Cable

Good Quality: Using precision die stamping, great assemblability, easy to install. 2mm thickened metal, non-defrmation, rapid cooling, to protect your SSD HDD up to the hilt..
High Compatibility: Supporting 2.5" hard drives such as SATA, IDE interface mechanical hard drive or SSD drives, compatible with SSD solid state disk and regular hard disks, with SATAI, SATAII, SATAIII..
Practical Use: Easily and safely install the 2.5 inch laptop hard disk onto 3.5 inch fixed support of desktop case with this metal mouting adapter bracket to use..
Easy Installation: The holes position is the same as 3.5 inch hard drive position ,the mounting adapter bracket can be put in the same place as the hard disk. Screws included for mounting the bracket onto the PC case..
Package Include: Pack of 1pcs 2.5" SSD HDD To 3.5" Mounting Adapter Brackets (Screws Included) + 1pcs SATA 3.0 Cable + 1pcs IDE to SATA Power Cable.

Check Stock

Geekworm NASPi V2.0 2.5 inch SATA HDD/SSD NAS Storage Kit with Safe Shutdown & Auto Power On Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

Geekworm NASPi offering an easy and fast way to create your home media center and building NAS or Web server for your raspberry pi 4 with a single 2.5 inch SATA HDD/SSD. For the Simplified version with full size HDMI, refer to NASPi-Lite(ASIN:B09J8B7G3W).
Dual SATA refer to NASPi-Gemini(ASIN:B07VXF2HJG).
NASPi is composed of three parts: X823 storage shield, X-C1 adapter board, heat dissipation system(include X823-A3 metal fan bracket and 4010 PWM fan), and they will be packed into a ALU-case(Raspberry Pi 4 Case) to get a complete NASPi.
(X-C1 V2.0 support auto power on function, X-C1 V1.3 doesn't).
How to Power NASPi: 5Vdc +/-5% , ≥4A (Via Type-C Port of X-C1).
Recommend to use Geekworm UL listed 5V 4A Type-C power adapter (ASIN:B09J856PND)..
SSD thickness description: NASPi supports SSD with a thickness not exceeding 9.8mm, most 2.5" HDD/SSD on the market are only 7mm thickness..
Button switch operation: Press button 1~2 seconds to reboot, 3 seconds to safe shutdown, 8 seconds to force shutdown (need to install shell script firstly).

Check Stock

Avolusion PRO-Z Series 10TB USB 3.0 External Gaming Hard Drive for Xbox Series X | S (White)

Built-in 10TB Capacity External Gaming Hard Drive. Compatible with XBOX Series X, S, ONE X, S, Orginal (1st Gen).
Game Console File System Pre-Formatted, Expand Game Console hard drive storage instantly! Add extra storage to your game console without opening up the case.
Attention: XBOX X|S Games has to play directly from internal SSD. Therefore External USB HDD only uses to store the XBOX X|S Games as buffer. It cannot play directly from the USB HDD. You can play XBOX ONE games directly from USB extended storage, which free up space on your XBOX Series X|S console storage..
To play XBOX X|S games, you need to copy game data from your USB hard drive back to your console's internal SSD storage. It’s much quicker to copy a X|S game from USB HDD than to re-download it..

Check Stock