ReviewsHdpe Single Wall Pipe

Cone Top Chimney Cap with Screen (8 Inch), Silver

  • PERFORMANCE: This heavy-duty all-weather chimney cap is constructed from 28 gauge galvanized steel and is designed to keep rain and snow from getting down the chimney pipe. It includes a built-in 1/4" metal screen to complete the look and help keep out debris and animals..
  • FIT: The cap is designed to be mounted over single wall pipes and includes a fixed base. We recommend ordering the same size chimney cap as your pipe..
  • SIZES: This item is available in multiple sizes to accommodate different pipe diameters.
  • QUALITY: This product is manufactured in the USA and comes with a 1 year warranty against product defect and workmanship.
Check Stock

NDS 970 Fits Spee-D Catch Basin 6 in. Drain Pipes & Fittings, 9 in, Black Plastic

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining moderate water flows from lawns, landscaped areas, patios, walkways, and under downspouts.
  • Fits the Spee-D Catch Basin Drain, 6 in. Sewer and Drain Pipe & Fittings, 6 in. Single-Wall Corrugated Pipe, 6 in. Sch. 40 Pipe. 87 GPM flow rate. 28.4 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installed—recommended for pedestrians, bicycles, and wheelchair traffic.
  • Place on top of drain pipe, drain fitting, or Spee-D Basin for a soil-tight fit. 9 in. Square Drain Grates are available in a variety of colors.
Check Stock

9-12MM Cable Pulling Socks Grips Wire Mesh Puller Socks Grip Mesh Puller Cable Puller Socks

  • 9-12MM: In color Red, force 700lbs(317kgs), weight 20g, length 310mm..
  • MATERIAL: Steel galvanized single strand preparation, anti rust, long used and durable..
  • DESIGN: Eye mesh design, single wave galvanized mesh cable socks, keep your cable from scratching, anti slip, easily grip the cable through the pipe line, the wall or the telecom..
  • CABLE SOCKS: Great tools for electrician, it is soft, and you can bend it. (But be careful, please do not bent it right angle.).
  • APPLICATION: Different size suits for cable with different diameter, by using in pipe cable laying and cable pulling..
Check Stock

Chain-Link W Shape Bottom Lock Fence Slats 6-ft Black

  • 6-ft Black W Slat, Single Wall with Bottom Lock Design.
  • Each Box Covers Approximately (10) Ten Linear Feet of Chain-Link Fence.
  • Each Box Contains 82 slats and 10 feet of bottom locking channel.
  • Manufactured from Virgin High Density Polyethylene (HDPE) Resins with Color Concentrate and UV Inhibitors.
Check Stock

OROPY 39 inch Pot Bar Rack Wall Mounted Detachable Pans Hanging Rail Kitchen Lids Utensils Hanger with 14 S Hooks Black

  • 【Simple Pipe Bar Design】Single loft bar design in black color.
  • could match most popular trendy kitchen decoration styles. The rail of rack is made up of 2 parts. Total length is 39 inches after assembly, long enough to hang more cookware than you think.
  • 【Multi-function Wall Hanger】This wall mount kitchen rail rack can be used for hanging pots, pans and other Utensils. And can also be used as a towel rack or a pot lid hanger.
  • 【A Great Helper in Kitchen】This wall pans and utensils rail allows you to keep your pots, pans and lids in an organized way, saving space for the countertop and cabinet in kitchen.
  • 【Strong Iron Construction】Constructed of heavy duty iron pipe (diameters of the pipe:1'') to ensure durability, maximum loading Capacity is 80 lbs, coated with low-reflective environment-friendly matt paint to avoid scratches and rusting.
  • 【100% Satisfaction Guarantee】100% worry-free guarantee. If for any reason, our rack doesn’t meet your needs all you need to do is let us know. From refund to replacement we’ll make it right for you.
Check Stock

SharkBite 1 Inch x 3/4 Inch MNPT Reducing Adapter, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U142LF

  • SHARKBITE BRASS PUSH MALE REDUCING ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an FNPT thread quickly and easily.
  • ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**.
  • VERSATILE: Pushfit male reducing connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
  • large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe.
  • EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push male reducing adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
  • PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects.
  • approved for underground and behind-the-wall applications with no access panels.
  • SPECS: Made with DZR forged brass, this reducing adapter can withstand 200 degrees F and 200 PSI.
Check Stock

Stainless 2' 90° Mandrel Bend Elbow - 1D Tight Radius - 16GA/.065' Wall - SS304 Stainless Steel Exhaust Bend Pipe Exhaust Piping for Car Exhaust Pipe Elbow Modified, Stair Handrail, etc - ATOTL

  • 【Material】: SS304 Stainless Steel Exhaust Pipe 90° Elbow Exhaust Piping.
  • 【Durable】: Not easily damaged, No rust, anti-oxidation, High temperature resistance.
  • 【Parameter】: OD: 2", Bend Degree: 90°, Wall Thickness: 16GA /.065", Back arc length: 4.9 inch, (can be welded to 2 inches outside diameter pipe).
Check Stock

Cone Top Chimney Cap in Galvanized Steel (8 Inch)

  • PERFORMANCE: This heavy-duty all-weather chimney cap is constructed from 28 gauge galvanized steel and is designed to keep rain and snow from getting down the chimney pipe.
  • FIT: The cap is designed to be mounted over single wall pipes and comes with a draw bolt collar to help ensure a secure fit.
  • SIZES: This item is available in 5 different sizes to accommodate multiple pipe diameters.
  • QUALITY: This product is manufactured in the USA and comes with a 1 year warranty against product defect and workmanship.
Check Stock

9-12MM Mesh Cable Puller Socks Galvanizing Eye Mesh Cable Wire Grip Metal Cable Socks Wire Grip Cable Puller Sock

  • SIZE CHARACTERISTICS: 9-12MM cable pulling sock, with Force 450N, equals 45kgs..
  • MATERIAL: Steel galvanized single strand preparation, anti rust, long used and durable..
  • DESIGN: Eye mesh design, single wave galvanized mesh cable socks, keep your cable from scratching, anti slip, easily grip the cable through the pipe line, the wall or the telecom..
  • FEATURES: With easy operate snap design, easily connect the cable grip sock with your pulling tools, saving time, improving work efficiency..
  • APPLICATION: Different size suits for cable with different diameter, by using in pipe cable laying and cable pulling. Great tools for electrician, it is soft, and you can bend it. (But be careful, please do not bent it right angle.).
Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

  • 【Package Includes】1 pcs disconnect tongs tool.
  • 1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
  • 【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
  • 【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
  • 【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..
Check Stock

NDS Round Grate, Fits Spee-D Catch Basin Drain & 6 in. Drain Pipes & Fittings, 6 in., Black Plastic

  • Protect your drainage system by using a grate on top of drain pipe to block debris from entering and potentially clogging the pipeline while letting excess surface water flow through. Ideal for draining light water flows from small lawns, landscaped areas, patios, and walkways.
  • Place on top of drain pipe, drain fitting, or Spee-D Basin for a soil-tight fit. 6 in. Round Drain Grates are available in a variety of colors and materials.
  • Comes with one 6 in. Round Grate. Hassle-free limited lifetime warranty guarantees the NDS product is free from defectsor well replace it.
  • Fits Spee-D Catch Basin Drain, 6 in. Sewer and Drain Pipe & Fittings, 6 in. Single-Wall Corrugated Pipe. 28 GPM flow rate. 9.1 sq. in. open surface area. Rated for NDS Class A loads (up to 60 psi) when properly installedrecommended for pedestrians, bicycles, and wheelchair traffic.
Check Stock