ReviewsHead Bolt Set

BMB Universal Headboard Nuts and Bolts - 1/4-20 X 2-1/2", 3-1/2", 4" or 6" Carriage Bolts with Washers and Lock Nuts (3-1/2")

  • PLEASE REVIEW OUR FIT CRITERIA before ordering Nut and Bolt Pack. This Package Includes 1 Size Set of Nuts and Bolts to attach a Headboard or Footboard to a bed frame..
  • If you need to connect both a headboard AND footboard, you will need to purchase a quantity of 2 Nut and Bolt packages..
  • Verify Headboard or Footboard has holes that penetrate all the way through the leg. It needs to be able to accommodate a through bolt: i.e. a bolt passing through the entire leg thicknesses front to back side of leg. here should be enough bolt left to secure with the supplied nut at the end opposite the bolt head..
  • Kit Includes: (4) Bolts, (4) Lock Nuts, and (4) Washers.
  • Hardware pack is intended to fit most, not all, headboards or footboards. Whether yours is thick or thin, we offer different length bolts for your convenience..
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Peck Slither and Slide

  • Compatible with deck heights of 53 to 60 inches.
  • Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
  • One-piece construction for easy assembly.
  • Shipping dimensions -118” x 17” x 26”.
  • Limited Lifetime against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..
Check Stock

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Yellow

  • 10' (118" actual length) Wave slide is compatible with deck heights of 53 to 60 inches high.
  • Age Range: 3 to 10 - Supports up to 250lbs.
  • Super deep wave slide (actual depth is 10") ensures children remain safe while sliding.
  • Mounting lumber not included - Recommended 5/8 x 1 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Recommended rounded head 5/16” bolt with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work.).
  • Strong one piece construction with 3 bolt installation.
  • Limited Lifetime Warranty against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. Warranty is applicable for intended use only..
  • Assembled dimensions-118" x 23.5" x 18" - Shipping dimensions -118” x 17” x 26”.
Check Stock

FEL-PRO ES 72173 Head Bolt Set

  • Meets or exceeds all original equipment specifications.
  • Application specific design to ensure a perfect fit.
  • Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts.
Check Stock

BMB Universal Headboard/Footboard Nuts and Bolts - 1/4-20 X 3/4', 1-1/2', 2', 2-1/2', 3', 3-1/2', 4', 4-1/2', 5', or 6' Carriage Bolts with Washers, Lock Washers, Hex Nuts and Lock Nuts

  • PLEASE REVIEW OUR FIT CRITERIA before ordering Nut and Bolt Pack. This Package Includes 1 Size Set of Nuts and Bolts to attach a Headboard or Footboard to a bed frame. If you need to connect both a headboard AND footboard, you will need to purchase a quantity of 2 Nut and Bolt packages..
  • Verify Headboard or Footboard has holes that penetrate all the way through the leg. It needs to be able to accommodate a through bolt: i.e. a bolt passing through the entire leg thicknesses front to back side of the leg and there should be enough bolt left to secure with the supplied nut at the end opposite the bolt head..
  • Kit Includes: (4) Bolts, (4) Lock Nuts, (4) Washers, (4) Standard Hex Nuts, and (4) Lock Washers. Hardware pack is intended to fit most, not all, headboards or footboards. Whether yours is thick or thin, we offer different length bolts for your convenience..
Check Stock

FEL-PRO ES 71328 Head Bolt Set

  • All MAHLE Original gaskets meet or exceed the original equipment specifications providing the finest sealing products available.
  • MAHLE Original gaskets utilizes OE equivalent or better materials in all our gaskets.
  • Cylinder head bolt set (GS) contains the head bolts necessary to replace one cylinder head. Torque-to-yield bolts cannot be reused, new fasteners ensure proper sealing load..
  • The contents of MAHLE Original gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package.
Check Stock

GearWrench KDT-82403 3 Piece Pry Bar Set

  • Manufactured from alloy steel for maximum strength and durability.
  • Rolling head provides maximum leverage, allowing you to pry objects apart or lift and rotate heavy machinery.
  • Chiseled edge is designed for demolition, prying, and aligning.
  • Tapered end is perfect for aligning bolt holes ensuring proper assembly.
  • Set includes 16 and 24 inch aligning pry bars and 15 and 18 inch rolling head pry bars.
Check Stock

MAHLE GS33316 Engine Cylinder Head Bolt Set, 1 Pack

  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available.
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets.
  • Cylinder head bolt set (GS) contains the head bolts necessary to replace one cylinder head. Torque-to-yield bolts cannot be reused, new fasteners ensure proper sealing load..
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package.
Check Stock